
Parts list 51
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 9
-
Brick 1 × 1 × 8
-
Brick 1 × 4 × 8
-
Brick Curved 2 × 1 No Studs [1/2 Bow] × 6![Brick Curved 2 × 1 No Studs [1/2 Bow] Black](/media/parts/11477/0/brick-curved-2-x-1-no-studs-12-bow-black.jpg)
-
Brick Arch 1 × 3 × 3 [Gothic] × 6![Brick Arch 1 × 3 × 3 [Gothic] Black](/media/parts/13965/0/brick-arch-1-x-3-x-3-gothic-black.jpg)
-
Plant, Flower, Plate Round 1 × 1 with 4 Petals No longer produced · last seen 2017 × 6
-
Plant, Leaves 4 × 3 No longer produced · last seen 2017 × 4
-
Brick 1 × 2 × 4
-
Plate 1 × 3 × 4
-
Hinge Brick 1 × 4 [Upper] × 4![Hinge Brick 1 × 4 [Upper] Dark Bluish Gray](/media/parts/3830/72/hinge-brick-1-x-4-upper-dark-bluish-gray.jpg)
-
Hinge Brick 1 × 4 [Lower] × 4![Hinge Brick 1 × 4 [Lower] Dark Bluish Gray](/media/parts/3831/72/hinge-brick-1-x-4-lower-dark-bluish-gray.jpg)
-
Tile Special 1 × 2 with Two Vertical Teeth / Tooth No longer produced · last seen 2024 × 4
-
Brick Special 1 × 2 with Vertical Clip [Open O Clip] × 4![Brick Special 1 × 2 with Vertical Clip [Open O Clip] Light Bluish Gray](/media/parts/30237b/71/brick-special-1-x-2-with-vertical-clip-open-o-clip-light-bluish-gray.jpg)
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 4
-
Tile Round 1 × 1 × 4
-
Brick Special 1 × 2 with Masonry Brick Profile × 4
-
Plate 2 × 2 × 3
-
Equipment Goblet / Glass × 2
-
Brick 2 × 2 Corner × 2
-
Plate 2 × 2 Corner × 2
-
Brick 1 × 1 × 2
-
Plate 2 × 3 × 2
-
Plate 1 × 2 × 2
-
Plate 1 × 4 × 2
-
Plate Round 1 × 1 with Solid Stud × 2
-
Technic Brick 1 × 1 with Pin Hole × 2
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) × 2
-
Gate 1 × 4 × 9 Arched with Bars and Three Studs No longer produced · last seen 2020 × 2
-
Brick Special 1 × 1 with Clip Vertical [Open O Clip, Hollow Stud] × 2![Brick Special 1 × 1 with Clip Vertical [Open O Clip, Hollow Stud] Dark Bluish Gray](/media/parts/60475b/72/brick-special-1-x-1-with-clip-vertical-open-o-clip-hollow-stud-dark-bluish-gray.jpg)
-
Wave / Flame Rounded with Base Rim × 2
-
Equipment Telescope / Torch / Spyglass, Support Round 1 × 1 × 1 2/3 × 2
-
Tile 2 × 4 with Groove × 2
-
Costume / Mask, Pumpkin with Jack O' Lantern Face and Green Stem Print × 1
-
Plate 2 × 2 × 1
-
Plate 4 × 10 × 1
-
Plate 4 × 4 × 1
-
Plant, Flower Stem No longer produced · last seen 2017 × 1
-
Plate 2 × 6 × 1
-
Equipment Pot / Cauldron 3 × 3 × 1 & 3/4 with Handles × 1
-
Brick Arch 1 × 3 × 1
-
Plant, Cherries × 1
-
Insect, Spider No longer produced · last seen 2017 × 1
-
Plate Round Corner 3 × 3 No longer produced · last seen 2019 × 1
-
Brick Round 1 × 1 Open Stud × 1
-
Plant, Flower, Plate Round 1 × 1 with 4 Petals No longer produced · last seen 2019 × 1
-
Minifig Head [Plain] [Hollow Stud] No longer produced · last seen 2023 × 1![Minifig Head [Plain] [Hollow Stud] Orange](/media/parts/3626c/25/minifig-head-plain-hollow-stud-orange.jpg)
-
Animal, Rodent, Rat / Mouse [Plain] No longer produced · last seen 2018 × 1![Animal, Rodent, Rat / Mouse [Plain] Light Bluish Gray](/media/parts/40234/71/animal-rodent-rat-mouse-plain-light-bluish-gray.jpg)
-
Cone 1 × 1 [Top Groove] × 1![Cone 1 × 1 [Top Groove] Black](/media/parts/59900/0/cone-1-x-1-top-groove-black.jpg)
-
Plate Special 2 × 2 with Groove and Center Stud (Jumper) × 1
-
Animal Body Part, Dog Bone [Short] × 1![Animal Body Part, Dog Bone [Short] White](/media/parts/93160/15/animal-body-part-dog-bone-short-white.jpg)
-
Tile Round 1 × 1 with Jam in Center Cookie Print No longer produced · last seen 2023 × 1
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (12)
These extra parts come with the set in case one gets lost.
-
Plant, Flower Stem No longer produced · last seen 2017 × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Leg Skeleton × 1
-
Plant, Cherries × 1
-
Plant, Flower, Plate Round 1 × 1 with 4 Petals No longer produced · last seen 2019 × 1
-
Plant, Flower, Plate Round 1 × 1 with 4 Petals No longer produced · last seen 2017 × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
-
Arm Skeleton Bent with Clips at 90° [Vertical Grip] × 1![Arm Skeleton Bent with Clips at 90° [Vertical Grip] White](/media/parts/93061/15/arm-skeleton-bent-with-clips-at-90-vertical-grip-white.jpg)
-
Animal Body Part, Dog Bone [Short] × 1![Animal Body Part, Dog Bone [Short] White](/media/parts/93160/15/animal-body-part-dog-bone-short-white.jpg)
-
Tile Round 1 × 1 × 1
-
Tile Round 1 × 1 with Jam in Center Cookie Print No longer produced · last seen 2023 × 1
Minifigures 2
Alternative models
Fan models by Rebrickable users that you can build (mostly) from this set’s parts. Instructions are available from the designers.
View the idea at Rebrickable ↗
What can I build with it?Description
A small set with a seasonal job
At 145 pieces, this is the sort of build you finish in a single sitting and then park on a windowsill or bookshelf. It comes from the seasonal range of LEGO® sets and stages a haunted scene with two minifigures. Because it is so compact, it works as an October decoration that will not take over a room, and it is easy to pack away again once the festivities are over. It also makes a tidy small gift for a fellow builder.
Colours that set the mood
The palette is bold. Black, dark bluish grey and light bluish grey build the gloomy backdrop, while a bright light orange supplies the pumpkin and lantern glow. That contrast makes the model easy to spot on a crowded shelf. If you scroll through the parts list on this page, you will see the grey bricks and plates carry most of the volume, with orange used sparingly but deliberately where the eye should land.
Forty-seven different parts
Those 145 pieces break down into 47 distinct part types, so many elements appear only once or twice. The build stays varied even though it is short, and the mix of decorative bits with ordinary bricks is useful for anyone topping up a spare-parts box. Each line in the list shows colour and quantity, which makes it simple to compare against your own collection and see exactly what you are missing or could swap in from elsewhere.
Life after October
Once the decorations go back in the cupboard, the bricks remain useful. Black and grey pieces suit castles, ruins and vehicles, and the orange elements can stand in for lamps or flames. Use the "What can I build?" tool on this page to see which other sets you could put together from parts you already own. That turns a seasonal extra into a general-purpose stash that earns its place in your collection all year round.
FAQ
- How many pieces and minifigures are in Halloween Haunt?
- Set 40260-1 has 145 pieces, made up of 47 different part types, and includes 2 minifigures.
- When was it released?
- It came out in 2017 as part of the seasonal Halloween range.
- Which colours does it use most?
- Mainly black, dark bluish grey and light bluish grey, with bright light orange as the accent.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



