
LEGO® Mateo and Z-Blob the Robot
Mateo and Z-Blob the Robot is a 237-piece set from the LEGO® Dreamzzz range. It combines a posable robot figure with a minifigure from the series, using 113 distinct parts across the build. White, black, light grey and trans-bright green give the model a technical, slightly futuristic look.
- Set number
- 71454
- Year
- 2023
- Pieces
- 237
- Minifigures
- 2
- Theme
- Dreamzzz
- Different parts
- 113
Parts list 113
-
Tile Round 1 × 1
× 12
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small
× 6
-
Arm Mechanical with Clip [Thick Support]
× 6
-
Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle
× 5
-
Brick Round 2 × 2 D. Tube with Rotation Joint Ball Half
No longer produced · last seen 2023
× 4
-
Plate 2 × 2
× 4
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced
× 4
-
Brick Round 2 × 2 with Axle Hole
× 4
-
Bar Holder with Clip
× 4
-
Plate Special 1 × 1 Rounded with Handle
× 4
-
Brick Curved Inverted 2 × 2 × 2/3
× 4
-
Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction
× 4
-
Brick Round 2 × 2 D. Tube with 45° Elbow and Axle Holes (Crossholes) at Each End [SHORT]
No longer produced · last seen 2023
× 4
-
Brick Special 2 × 5 with Slope, Studs on Side
× 4
-
Brick Special 1 × 2 × 1 1/3 with Rotation Joint Socket
× 4
-
Tile Round 1 × 1
× 4
-
Plate 2 × 2
× 3
-
Plate 1 × 2
× 3
-
Plate Special 1 × 2 Rounded with 2 Open Studs
× 3
-
Technic Axle Pin with Friction Ridges Lengthwise
× 3
-
Bracket 1 × 2 - 2 × 2
× 3
-
Arm Mechanical with Clip [Thick Support]
× 3
-
Plate Round 2 × 2 with Rounded Bottom [Boat Stud]
× 2
-
Brick Special 1 × 1 with Handle
× 2
-
Brick 1 × 1
× 2
-
Plate 2 × 4
× 2
-
Plate 2 × 3
× 2
-
Plate 2 × 2
× 2
-
Plate 1 × 2
× 2
-
Technic Brick 1 × 2 [1 Pin Hole]
× 2
-
Technic Bush
× 2
-
Brick Special 1 × 1 with Headlight
× 2
-
Plate Round 1 × 1 with Solid Stud
× 2
-
Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle)
× 2
-
Plate Special 2 × 2 with 1 Pin Hole [Complete Underside Rib]
× 2
-
Plate Special 1 × 2 with Clip Horizontal on Side
× 2
-
Brick Curved 2 × 1 No Studs [1/2 Bow]
× 2
-
Plate Round Half 3 × 6 with 1 × 2 Cutout
× 2
-
Plate Special Round 2 × 2 with Center Stud (Jumper Plate)
× 2
-
Brick Curved 3 × 2 No Studs
× 2
-
Technic Axle 3 with Stop
× 2
-
Plate Special 1 × 1 Rounded with Handle
× 2
-
Wedge Plate 2 × 2 Cut Corner
× 2
-
Brick Special 1 × 2 Palisade [aka Log]
× 2
-
Brick Round 2 × 2 Dome Top, Hollow Stud
× 2
-
Brick Curved 2 × 2 with Lip, No Studs
× 2
-
Technic Brick 1 × 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin
× 2
-
Plate Special Round 1 × 1 with Hollow Stud and Horizontal Bar 1L
× 2
-
Plate Special 1 × 2 Rounded with 2 Open Studs
× 2
-
Brick Sloped Inverted 33° 3 × 2, Connections between Studs, Ovoid Bottom Pin
No longer produced · last seen 2024
× 2
-
Plate Round 2 × 2 with Axle Hole Type 1 (+ Opening)
× 2
-
Plate Round 2 × 2 with Axle Hole Type 1 (+ Opening)
× 2
-
Plate Special 1 × 2 [Side Handle Closed Ends]
× 2
-
Technic Ball Joint with Through Axle Hole
× 2
-
Cone 1 × 1 [Top Groove]
× 2
-
Technic Brick Special 2 × 2 with Ball Socket Wide and Axle Hole, No Arm Holes
× 2
-
Launcher, Plate Special 1 × 2 with Mini Blaster Square
× 2
-
Launcher Trigger, Weapon Gun Trigger
× 2
-
Technic Brick Special 1 × 2 with Pin Hole and 1 × 2 Plate
× 2
-
Bracket 1 × 1 - 1 × 2 Inverted
× 2
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (20)
These extra parts come with the set in case one gets lost.
-
Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip]
× 1
-
Technic Bush
× 1
-
Technic Pin 1/2 without Friction Ridges
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Minifig Hipwear Utility Belt
× 1
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced
× 1
-
Plate Special Round 1 × 1 with Hollow Stud and Horizontal Bar 1L
× 1
-
Pneumatic T-Piece (T Bar) [New Style]
× 1
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small
× 1
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small
× 1
-
Technic Pin with Friction Ridges Lengthwise with No Center Slots
× 1
-
Weapon Lightsaber Hilt with Bottom Ring
× 1
-
Launcher Trigger, Weapon Gun Trigger
× 1
-
Creature Body Part, Horn (Unicorn)
× 1
-
Technic Pin 1/2 with Friction
× 1
-
Tile Round 1 × 1
× 1
-
Tile Round 1 × 1
× 1
-
Tile Round 1 × 1
× 1
-
Tile Round 1 × 1 with Black Animal Eye print
× 1
-
Tile Round 1 × 1 with Black Hourglass print
No longer produced · last seen 2024
× 1
Minifigures 2
-
Jayden
× 1
-
Mateo, Utility Belt
× 1
Alternative models
Fan models by Rebrickable users that you can build (mostly) from this set’s parts. Instructions are available from the designers.
- Mateo's Mech (Lego 71454 Alternate Build
- 71454 Z-Rex
- Mateo's Dragon - 71454
- 71454 z-blob car
- 71454 Robotic Arm
- Z-blob medieval
- Alien Trooper Mech
- Z-Dog
- Z-Blob Spaceship Spaceship SPACESHIP!!!
Description
A robot built for posing, not just standing
At 237 pieces, this set does not build into a static model but into a character-style robot, which is typical for the Dreamzzz range. With 113 different parts packed into that total, there is a fair amount of variety along the way, as joint pieces, panel sections and small detail elements take turns rather than repeating in large flat areas. Builders who enjoy posable figures rather than plain buildings get a compact example here of how character building and play value come together, and it works equally well as a first step into figure-based sets for someone used to vehicles or buildings.
White, black and a flash of trans-green
White, black and light bluish grey form a neutral, technical base that suits a robot character well. Trans-bright green is used more sparingly, likely for energy or light effects on the model, and keeps Z-Blob recognisable even from a distance. That combination of neutral base colours with one striking transparent accent is common across the Dreamzzz range and stands out clearly against the warmer palettes used in many other themes.
Mateo joins the robot
Alongside the robot Z-Blob, the minifigure Mateo is included, so scenes from the series can be acted out straight away without needing another set. Two minifigures come with this set in total. For anyone familiar with Dreamzzz, this pairing of a lead character with their robot companion is the real draw, while the build itself works as a satisfying project in its own right. The scene can also grow later, once other Dreamzzz sets from the same range join the collection.
Checking the parts list
With 237 pieces made up of 113 distinct parts, the full parts list on this page is worth checking before swapping out bricks or folding the set into another project. The joint pieces and the trans-green elements in particular are not found in every set, which makes them useful for other builds involving movement or light effects. Every colour and quantity is listed individually.
FAQ
- What is the Dreamzzz theme about?
- Dreamzzz is a LEGO® theme built around characters who travel between a dream world and the waking world. Set 71454 features two of its central characters, Mateo and the robot Z-Blob.
- Does the robot move?
- The model is designed as a posable character figure, typical of Dreamzzz robots. The exact points of movement come from the instructions rather than the facts listed here.
- How many minifigures are included?
- The set includes 2 minifigures, one of them Mateo, paired with the robot Z-Blob.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



