
LEGO® Spider-Man & Doctor Octopus Mech Battle
Spider-Man & Doctor Octopus Mech Battle pits two buildable mechs against each other, drawing on the classic rivalry between the two Marvel characters. With 312 pieces, two minifigures and 103 different elements, it's a compact set built entirely around head-to-head action rather than a single vehicle or building.
- Set number
- 76198
- Year
- 2021
- Pieces
- 312
- Minifigures
- 2
- Theme
- Spider-Man
- Different parts
- 103
Parts list 103
-
Bar Holder with Hole and Bar Handle × 20
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small × 16
-
Plate Special 1 × 2 5.9mm Towball Socket × 8
-
Plate Special 1 × 2 with 5.9mm Towball Socket and Towball × 8
-
Hinge Cylinder 1 × 3 Locking with 1 Finger and 2 Fingers On Ends, with Hole, 7 Teeth × 8
-
Plate Round 1 × 1 with Open Stud × 8
-
Plate Special 1 × 2 Rounded with 2 Open Studs × 7
-
Bar Holder with Clip × 6
-
Bar Holder with Clip × 6
-
Brick Curved 2 × 1 No Studs [1/2 Bow] × 6![Brick Curved 2 × 1 No Studs [1/2 Bow] Green](/media/parts/11477/2/brick-curved-2-x-1-no-studs-12-bow-green.jpg)
-
Plate Special 1 × 2 with 5.9mm Centre Side Towball × 6
-
Plate Special 1 × 2 5.9mm Centre Side Towball Socket × 6
-
Brick Curved Inverted 2 × 1 × 6
-
Brick Sloped 45° 2 × 1 with 2/3 Cutout [New Version] × 5![Brick Sloped 45° 2 × 1 with 2/3 Cutout [New Version] Dark Blue](/media/parts/15672/272/brick-sloped-45-2-x-1-with-23-cutout-new-version-dark-blue.jpg)
-
Plate Special 1 × 2 Side Handle [Free Ends] × 4![Plate Special 1 × 2 Side Handle [Free Ends] Red](/media/parts/2540/4/plate-special-1-x-2-side-handle-free-ends-red.jpg)
-
Plate 1 × 1 × 4
-
Brick Curved 1 × 2 × 1 1/3 with Curved Top × 4
-
Plate Special Round 2 × 2 with Center Stud (Jumper Plate) × 4
-
Bar 2L with Towball × 4
-
Brick Wedged, Curved 2 × 1 with Stud Notch Right × 4
-
Brick Wedged, Curved 2 × 1 with Stud Notch Left × 4
-
Plate Special 1 × 2 Rounded with 2 Open Studs × 4
-
Bracket 1 × 1 - 1 × 1 Inverted × 4
-
Bracket 1 × 1 - 1 × 1 × 4
-
Bracket 1 × 1 - 1 × 1 × 4
-
Hinge Cylinder 1 × 2 Locking with 2 Click Fingers and Axle Hole, 7 Teeth × 4
-
Hinge Cylinder 1 × 3 Locking with 1 Finger and Technic Friction Pin with Squared Hole × 4
-
Plate Special 1 × 1 with Clip Horizontal [Thick Open O Clip] × 4![Plate Special 1 × 1 with Clip Horizontal [Thick Open O Clip] Red](/media/parts/61252/4/plate-special-1-x-1-with-clip-horizontal-thick-open-o-clip-red.jpg)
-
Technic Pin Connector Round with 4 Clips × 4
-
Tile Special 1 × 2 with Sloped Walls AKA Money / Gold Bar [Ingot] × 4![Tile Special 1 × 2 with Sloped Walls AKA Money / Gold Bar [Ingot] Flat Silver](/media/parts/99563/179/tile-special-1-x-2-with-sloped-walls-aka-money-gold-bar-ingot-flat-silver.jpg)
-
Plate 1 × 2 × 3
-
Tile 1 × 1 with Groove × 3
-
Technic Plate 2 × 4 [3 Holes] × 3![Technic Plate 2 × 4 [3 Holes] Bright Light Orange](/media/parts/3709/191/technic-plate-2-x-4-3-holes-bright-light-orange.jpg)
-
Brick Curved 2 × 1 No Studs [1/2 Bow] × 3![Brick Curved 2 × 1 No Studs [1/2 Bow] Black](/media/parts/11477/0/brick-curved-2-x-1-no-studs-12-bow-black.jpg)
-
Cone 1 × 1 [Top Groove] × 3![Cone 1 × 1 [Top Groove] Flat Silver](/media/parts/59900/179/cone-1-x-1-top-groove-flat-silver.jpg)
-
Tile Special 1 × 2 with Sloped Walls AKA Money / Gold Bar [Ingot] × 3![Tile Special 1 × 2 with Sloped Walls AKA Money / Gold Bar [Ingot] Bright Light Orange](/media/parts/99563/191/tile-special-1-x-2-with-sloped-walls-aka-money-gold-bar-ingot-bright-light-orange.jpg)
-
Bracket 1 × 2 - 1 × 2 Inverted × 3
-
Plate Special 1 × 2 Side Handle [Free Ends] × 2![Plate Special 1 × 2 Side Handle [Free Ends] Dark Bluish Gray](/media/parts/2540/72/plate-special-1-x-2-side-handle-free-ends-dark-bluish-gray.jpg)
-
Technic Pin with Friction Ridges Lengthwise and Center Slots No longer produced · last seen 2021 × 2
-
Technic Brick 1 × 2 [1 Pin Hole] × 2![Technic Brick 1 × 2 [1 Pin Hole] Dark Bluish Gray](/media/parts/3700/72/technic-brick-1-x-2-1-pin-hole-dark-bluish-gray.jpg)
-
Technic Pin 1/2 without Friction Ridges × 2
-
Plate Special 2 × 2 with Wheel Holders No longer produced · last seen 2021 × 2
-
Dish 2 × 2 Inverted [Radar] × 2![Dish 2 × 2 Inverted [Radar] Green](/media/parts/4740/2/dish-2-x-2-inverted-radar-green.jpg)
-
Dish 2 × 2 Inverted [Radar] × 2![Dish 2 × 2 Inverted [Radar] Dark Bluish Gray](/media/parts/4740/72/dish-2-x-2-inverted-radar-dark-bluish-gray.jpg)
-
Plate Special 2 × 2 with 1 Pin Hole [Complete Underside Rib] × 2![Plate Special 2 × 2 with 1 Pin Hole [Complete Underside Rib] Red](/media/parts/10247/4/plate-special-2-x-2-with-1-pin-hole-complete-underside-rib-red.jpg)
-
Tile Special 2 × 2 Inverted × 2
-
Brick Curved 2 × 2 × 2/3 × 2
-
Technic Steering Gear with 3 Towball Joints, Compact × 2
-
Brick Sloped 45° 2 × 1 with 2/3 Cutout [New Version] × 2![Brick Sloped 45° 2 × 1 with 2/3 Cutout [New Version] Green](/media/parts/15672/2/brick-sloped-45-2-x-1-with-23-cutout-new-version-green.jpg)
-
Tile Special 1 × 1 with Clip with Rounded Edges × 2
-
Tile Round 1 × 1 Half Circle × 2
-
Tile Special 2 × 2 Corner with Cut Corner - Facet × 2
-
Tile Special 2 × 2 Corner with Cut Corner - Facet × 2
-
Wave / Power Blast Rounded Energy with Bar Handle × 2
-
Tile 2 × 2 Curved, Macaroni × 2
-
Brick Special 1 × 2 with Handle × 2
-
Tile 1 × 1 with Groove × 2
-
Technic Plate 1 × 5 with Smooth Ends, 4 Studs and Centre Axle Hole × 2
-
Brick Curved Inverted 2 × 2 × 2/3 × 2
-
Web Effect Small Short Bar on Front and Back No longer produced · last seen 2023 × 2
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (11)
These extra parts come with the set in case one gets lost.
-
Technic Pin with Friction Ridges Lengthwise and Center Slots No longer produced · last seen 2021 × 1
-
Plate 1 × 1 × 1
-
Tile Round 1 × 1 Half Circle × 1
-
Tile 1 × 1 with Groove × 1
-
Tile 1 × 1 with Groove × 1
-
Web Effect Long and Narrow Bars at Both Ends No longer produced · last seen 2023 × 1
-
Technic Pin 1/2 without Friction Ridges × 1
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
-
Plate Round 1 × 1 with Open Stud × 1
-
Plate Round 1 × 1 with Open Stud × 1
Minifigures 2
Alternative models
Fan models by Rebrickable users that you can build (mostly) from this set’s parts. Instructions are available from the designers.
- Transformer Galvatron Tank from LEGO 76198: Spider-Man & Doctor Octopus Mech Battle
- Transformer Drill Tank from LEGO 76198: Spider-Man & Doctor Octopus Mech Battle
Description
Two mechs, one showdown
Rather than a single large model, this set delivers two smaller mechs designed to face off directly – one built for Spider-Man, the other for his adversary Doctor Octopus. That split means the 312 pieces cover two separate builds instead of concentrating on one bigger model, which works well for two builders working side by side. Once finished, each mech is ready to go straight into a battle without needing anything else from outside the box. It also works well solo, building one mech after the other before setting up the showdown.
103 parts across two posable figures
With 103 unique elements shared between two complete mechs, the part variety stays manageable, keeping the build quick without making either mech feel simplified. Both mechs get articulated arms and legs, a common feature in this style of set that lets the finished models actually hold combat poses rather than standing stiffly. The parts list on this page breaks down all 103 elements individually, useful for anyone after specific joint or armour pieces for their own mech builds.
Grey tones with a red accent
Light bluish grey, black and dark bluish grey make up the mechanical base of both mechs, while red is used as a strong accent on Spider-Man's side of the build. That colour split makes it easy to sort pieces by mech before starting, since the neutral greys and the red accent map cleanly onto the two different builds. The full colour breakdown for all 103 elements is listed in the parts list above.
Battle-ready straight out of the box
Two minifigures pilot the mechs, turning the set into a ready-made showdown scene without needing extra accessories. That makes it a natural pick for two children who each want their own mech and figure to control during play. It also pairs well with other Marvel mech sets, letting the collection grow with new opponents for varied battles over time, which keeps the set relevant well beyond the first afternoon of building and playing.
FAQ
- How many mechs come with set 76198?
- The set includes two posable mechs, one for Spider-Man and one for Doctor Octopus, built for a direct battle.
- How many minifigures are included?
- Two minifigures come with the set, one piloting each mech.
- How many pieces does the set have in total?
- 312 pieces in total, including 103 different elements split across both mechs.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



