
Republic Dropship with AT-OT
Set 10195 pairs a Republic dropship with the AT-OT walker it carries. Released in 2009 as part of the Ultimate Collector Series, it has 1,758 pieces and 8 minifigures.
- Set number
- 10195
- Year
- 2009
- Pieces
- 1,758
- Minifigures
- 8
- Different parts
- 250
Parts list 250
-
Technic Pin with Friction Ridges Lengthwise and Center Slots
No longer produced · last seen 2021
× 63
-
Brick Sloped 45° 2 × 2
× 37
-
Plate Round 2 × 2 with Rounded Bottom [Boat Stud]
× 34
-
Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots
No longer produced · last seen 2021
× 33
-
Technic Axle Pin with Friction Ridges Lengthwise
× 33
-
Plate 1 × 6
× 32
-
Technic Axle 3 with Stud
No longer produced · last seen 2019
× 30
-
Plate 1 × 2
× 29
-
Brick Round 1 × 1 Open Stud
× 28
-
Plate 1 × 4
× 28
-
Technic Brick 1 × 2 [2 Pin Holes]
× 28
-
Plate Special 2 × 2 with 1 Pin Hole [Split Underside Ribs]
No longer produced · last seen 2013
× 26
-
Brick Curved 6 × 1
× 26
-
Technic Pin 1/2 without Friction Ridges
× 21
-
Plate 2 × 2 Corner
× 20
-
Technic Axle 4
× 20
-
Technic Pin without Friction Ridges Lengthwise
× 18
-
Dish 6 × 6 Inverted (Radar) with Hollow Studs
No longer produced · last seen 2011
× 18
-
Technic Pin 1/2 with 2L Bar Extension
× 18
-
Technic Pin Connector Round [Slotted]
× 18
-
Brick 1 × 8
× 17
-
Wedge Plate 4 × 9 without Stud Notches
No longer produced · last seen 2012
× 16
-
Seat / Chair 2 × 2
No longer produced · last seen 2023
× 16
-
Plate Round 1 × 1 with Solid Stud
× 16
-
Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole]
No longer produced · last seen 2021
× 16
-
Cone 1 × 1 [Top Groove]
× 16
-
Plate Round 1 × 1 with Solid Stud
× 15
-
Technic Beam 1 × 3 Thin
× 15
-
Brick Sloped 45° 2 × 1 with Bottom Pin
× 14
-
Technic Brick 1 × 2 with Axle Hole Type 2 [X Opening]
No longer produced · last seen 2016
× 14
-
Technic Beam 1 × 3 Thick
× 14
-
Brick Curved Inverted 6 × 1
× 14
-
Plate 2 × 4
× 13
-
Plate 2 × 6
× 13
-
Brick Sloped 45° 2 × 4
× 12
-
Hinge Plate 1 × 2 Locking with 2 Fingers On End, with Groove, 9 Teeth
No longer produced · last seen 2020
× 12
-
Brick Round 4 × 4 with 4 Side Pin Holes and Center Axle Hole
× 12
-
Plate 4 × 8
× 11
-
Plate 1 × 8
× 11
-
Technic Brick 4 × 6 with 2 × 4 Opening
× 11
-
Technic Axle Connector Smooth [with x Hole + Orientation]
× 11
-
Wedge Plate 3 × 3 Cut Corner
× 10
-
Brick 1 × 2
× 10
-
Technic Pin 3/4
No longer produced · last seen 2020
× 10
-
Technic Beam 1 × 9 Bent (7 - 3) Thick
× 10
-
Dish 4 × 4 Inverted [Radar] with Star Wars AT-AT/AT-TE Print
No longer produced · last seen 2009
× 10
-
Brick Sloped Inverted 34° 3 × 1 with Internal Stopper
No longer produced · last seen 2020
× 10
-
Hinge Plate 1 × 2 Locking with 1 Finger On End, with Groove
No longer produced · last seen 2014
× 10
-
Tile 1 × 6 with Groove
× 10
-
Dome Hemisphere 3 × 3 Ball Turret
× 10
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 10
-
Wheel 31 × 15 Technic, 7 Pin Holes
No longer produced · last seen 2013
× 10
-
Brick 1 × 2
× 9
-
Brick 1 × 6
× 9
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced
× 9
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced
× 9
-
Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]
× 9
-
Technic Brick 1 × 2 [1 Pin Hole]
× 9
-
Plate 1 × 4
× 9
-
Plate 2 × 10
× 9
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (14)
These extra parts come with the set in case one gets lost.
-
Technic Pin with Friction Ridges Lengthwise and Center Slots
No longer produced · last seen 2021
× 2
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced
× 2
-
Technic Pin without Friction Ridges Lengthwise
× 2
-
Technic Bush
× 2
-
Technic Pin 1/2 without Friction Ridges
× 2
-
Lever Small Base with Black Lever
× 1
-
Technic Pin 3/4
No longer produced · last seen 2020
× 1
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced
× 1
-
Technic Pin 1/2 without Friction Ridges
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 1
Minifigures 8
Description
Built for the Clone Wars
In the era of the Clone Wars, the Republic moves its armies across the galaxy with heavy carriers that drop vehicles straight onto the battlefield. This set captures that idea with two models that belong together: a large dropship and the AT-OT, a walker designed to haul troops and supplies. It focuses on the prequel era rather than the original trilogy, and on logistics and troop transport rather than a famous hero ship.
More playable than most UCS sets
With eight minifigures and two vehicles, 10195 invites handling in a way that many display models do not. You can pair the walker with its carrier, move the troops around and stage a landing scene on a table. The full minifigure line-up is listed on this page. For collectors building up a clone army, the figure count is a welcome bonus, and it gives the finished display a sense of activity that a lone starship rarely has.
Two builds, one inventory
The 1,758 pieces draw on 250 unique parts, which is a broad range for a set of this size. That is largely because two very different vehicles come out of the same box: a carrier that needs rigid framing and broad surfaces, and a walker built around legs and compact detailing. Light and dark bluish grey lead the colour list, with white and black giving it the bright Republic look of the prequel films.
Checking and reusing
Because two models share one inventory, parts can easily drift between them over the years, so it helps to check them separately when you go through a used copy. The parts list below makes that straightforward. Afterwards, the What can I build? feature on this page shows which other sets you could put together from a similar collection, which is useful if you plan to expand a Clone Wars display or design your own Republic vehicles, from gunships to smaller walkers.
FAQ
- Which era of Star Wars is this set from?
- It belongs to the Clone Wars era of the prequel trilogy, when the Republic's clone army fought the Separatists.
- How many pieces and minifigures are there?
- The set has 1,758 pieces and 8 minifigures.
- Is it more for display or play?
- Both. It is part of the Ultimate Collector Series, but the two vehicles and eight figures make it more playable than most sets in the line.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



