
Parts list 90
-
Plate Round 2 × 2 with Rounded Bottom [Boat Stud] × 4![Plate Round 2 × 2 with Rounded Bottom [Boat Stud] White](/media/parts/2654/15/plate-round-2-x-2-with-rounded-bottom-boat-stud-white.jpg)
-
Brick 1 × 2 × 4
-
Brick 1 × 2 × 4
-
Brick Sloped 45° 2 × 2 × 4
-
Brick Special 1 × 1 with Headlight × 4
-
Plate Special 1 × 2 with 5.9mm Centre Side Towball × 4
-
Plate Special 1 × 2 5.9mm Centre Side Towball Socket × 4
-
Tyre 14 × 9 Smooth Small Wide Slick × 4
-
Plate Special 1 × 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) × 4
-
Wheel 8 × 9 with Hole Notched for Wheels Holder Pin, Re-inforced Back × 4
-
Brick Special 1 × 1 with Stud on 1 Side × 4
-
Brick Special 1 × 1 with Stud on 1 Side × 4
-
Plate 2 × 2 Corner × 2
-
Plate 2 × 2 Corner × 2
-
Brick 2 × 4 × 2
-
Brick 2 × 4 × 2
-
Brick 2 × 2 × 2
-
Brick 2 × 2 × 2
-
Brick 1 × 2 × 2
-
Plate 2 × 2 × 2
-
Plate 1 × 2 × 2
-
Plate 1 × 2 × 2
-
Plate 1 × 1 × 2
-
Plate 2 × 8 × 2
-
Bracket 1 × 2 - 1 × 4 [Rounded Corners] No longer produced · last seen 2019 × 2![Bracket 1 × 2 - 1 × 4 [Rounded Corners] Red](/media/parts/10201/4/bracket-1-x-2-1-x-4-rounded-corners-red.jpg)
-
Plate Special 1 × 2 with Clip Horizontal on Side × 2
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) × 2
-
Brick Sloped 45° 2 × 1 with 2/3 Cutout [New Version] × 2![Brick Sloped 45° 2 × 1 with 2/3 Cutout [New Version] Blue](/media/parts/15672/1/brick-sloped-45-2-x-1-with-23-cutout-new-version-blue.jpg)
-
Plate Special Round 2 × 2 with Center Stud (Jumper Plate) × 2
-
Bar Holder with Hole and Bar Handle × 2
-
Tile Special 1 × 2 Grille with Bottom Groove × 2
-
Brick Curved Inverted 2 × 1 No longer produced · last seen 2019 × 2
-
Tile Round 1 × 1 Quarter × 2
-
Plate Special 1 × 1 Rounded with Handle × 2
-
Wedge Plate 2 × 2 Cut Corner × 2
-
Brick Sloped 45° 2 × 1 with 2/3 Inverted Cutout and No Stud × 2
-
Lever Small Base with Black Lever × 2
-
Brick Sloped 18° 4 × 2 No longer produced · last seen 2018 × 2
-
Tile 2 × 2 with Groove × 2
-
Plate Special 3 × 2 with Rounded End, Hole × 2
-
Plate Special 3 × 2 with Rounded End, Hole × 2
-
Brick Sloped 33° 3 × 2 × 2
-
Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] × 2![Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] Dark Purple](/media/parts/3660/85/brick-sloped-inverted-45-2-x-2-ovoid-bottom-pin-bar-sized-stud-holes-dark-purple.jpg)
-
Plate 2 × 6 × 2
-
Plate Special 1 × 4 Offset with Bar Holes No longer produced · last seen 2018 × 2
-
Brick Special 1 × 1 Studs on 4 Sides × 2
-
Dish 2 × 2 Inverted [Radar] × 2![Dish 2 × 2 Inverted [Radar] Black](/media/parts/4740/0/dish-2-x-2-inverted-radar-black.jpg)
-
Brick Sloped Inverted 45° 4 × 2 Double with 2 × 2 Recessed × 2
-
Brick Arch 1 × 3 × 2 Curved Top × 2
-
Brick Curved 1 × 2 × 1 1/3 with Curved Top × 2
-
Plate Round 1 × 1 with Solid Stud × 2
-
Plate Round 1 × 1 with Solid Stud × 2
-
Plate Special 2 × 2 with Wheels Holder Wide No longer produced · last seen 2024 × 2
-
Technic Ball Joint × 2
-
Plate Special 2 × 2 with Only 2 Studs × 2
-
Wedge Plate 3 × 2 Right × 2
-
Wedge Plate 3 × 2 Left × 2
-
Brick Curved 2 × 2 × 2/3 Two Studs and Curved Slope End × 2
-
Plate Special 1 × 2 [Side Handle Closed Ends] × 2![Plate Special 1 × 2 [Side Handle Closed Ends] Red](/media/parts/48336/4/plate-special-1-x-2-side-handle-closed-ends-red.jpg)
-
Brick Sloped 18° 2 × 1 × 2/3 with 4 Slots / Grate No longer produced · last seen 2024 × 2
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (15)
These extra parts come with the set in case one gets lost.
-
Headwear Accessory Visor For Standard Helmet No longer produced · last seen 2023 × 1
-
Tile Special Round 1 × 1 with Hollow Bar × 1
-
Tile Round 1 × 1 Quarter × 1
-
Lever Small Base with Black Lever × 1
-
Plate 1 × 1 × 1
-
Plate 1 × 1 × 1
-
Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] × 1![Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] Black](/media/parts/48729b/0/bar-1l-with-clip-cut-edges-and-one-side-hole-gap-in-clip-black.jpg)
-
Plate Round 1 × 1 with Solid Stud × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Arm Mechanical Straight (Droid) [2 Clips at 90°] × 1![Arm Mechanical Straight (Droid) [2 Clips at 90°] Black](/media/parts/59230/0/arm-mechanical-straight-droid-2-clips-at-90-black.jpg)
-
Weapon Lightsaber Hilt with Bottom Ring × 1
-
Tile Round 1 × 1 × 1
-
Tile Round 1 × 1 with Gauge and Red Pointer Print No longer produced · last seen 2021 × 1
-
Tile Round 1 × 1 with Black Eye with Off-Side Pupil Partially Closed Print No longer produced · last seen 2021 × 1
Minifigures 1
Alternative models
Fan models by Rebrickable users that you can build (mostly) from this set’s parts. Instructions are available from the designers.
What can I build with it?Description
A small box with room to improvise
The Classic line is aimed at builders who would rather invent than follow a page-by-page guide, and Fun Future fits that idea well. With 186 pieces it is easy to get through in one sitting, yet it gives you enough to try a figure, a vehicle or a small base. You can build the suggested model first and then take it apart, or simply tip everything out and mix it with your existing bricks. Either way, the set works as a quick spark for a creative afternoon.
Colours that mix easily
The main colours are red, white, blue and light bluish grey. That is a bold, almost flag-like combination, and it suits spaceships, robots or futuristic stations. Light bluish grey handles the technical surfaces while red and blue add the accents. Even if your own models use a different palette, the white and grey pieces blend in almost anywhere, so the parts stay useful long after the first build has been dismantled and the box has been put away.
74 different elements
Among the 186 pieces there are 74 different elements, which is a healthy variety for a set of this size. Beyond standard bricks you will find plates, special shapes and small accessories that let you add detail. The full parts list on this page shows every colour and quantity, so you can see at a glance which parts are scarce and which you will have in larger numbers when you start your own constructions.
Who it suits
Fun Future works for young builders just starting out and for adults who want to top up a collection with colourful basics. The single minifigure means there is something to play with straight away. If you already own the set, try the “What can I build?” tool on Bricoria. It checks which other models your pieces can make, so you can reuse the bricks you have without buying anything extra or counting them by hand.
FAQ
- How many pieces and minifigures are in Fun Future?
- Set 10402 has 186 pieces, including 74 different elements, and one minifigure. It was released in 2018 as part of the Classic line.
- Is there a fixed way to build it?
- The set is meant as inspiration. You can build the suggested model or combine the bricks freely and mix them with pieces you already own.
- Can I use the parts for something else later?
- Yes. Use “What can I build?” to see which other models your pieces allow. The parts list on this page shows exactly what is included.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



