
Eight Studs
Set 19006 Eight Studs is another BrickLink Designer Program model, and its name likely nods to the classic 2x4 brick — the eight-stud piece that has defined LEGO building for decades. With 1,394 pieces, 188 unique parts and two minifigures, it's a mid-to-large collector's set. The tan, black, green and reddish brown colour scheme gives it an earthy, natural feel.
- Set number
- 19006
- Year
- 2019
- Pieces
- 1,394
- Minifigures
- 2
- Different parts
- 188
Parts list 188
-
Tile 2 × 2 Corner
× 48
-
Plate 1 × 2
× 46
-
Plant, Flower, Plate Round 1 × 1 with 5 Petals
× 44
-
Plate 1 × 1
× 41
-
Plant, Grass Stem with Bar Hole [3.2mm]
× 36
-
Plate 1 × 6
× 34
-
Tile 2 × 2 Curved, Macaroni
× 32
-
Brick Round Corner 2 × 2 Macaroni with Stud Notch and Reinforced Underside [New Style]
× 32
-
Plate 1 × 3
× 30
-
Plate 1 × 4
× 30
-
Plate 1 × 1
× 29
-
Plate 2 × 4
× 26
-
Plate Round 2 × 2 with Axle Hole Type 1 (+ Opening)
× 26
-
Plate Special 1 × 1 with Clip Horizontal [Thick Open O Clip]
× 26
-
Tile 1 × 4 with Groove
× 25
-
Plate 1 × 2
× 24
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
× 24
-
Tile Special 1 × 1 with Clip with Rounded Edges
× 24
-
Brick 1 × 3
× 22
-
Tile 1 × 8 with Groove
× 22
-
Tile 1 × 4 with Groove
× 21
-
Plate 1 × 8
× 20
-
Bar 1 × 4 × 3 [End Tabs]
× 19
-
Plate 2 × 4
× 16
-
Plant, Plate 1 × 1 Round with 3 Leaves
× 16
-
Hinge Plate 1 × 4 Swivel Top / Base - Solid Clip [Complete Assembly]
No longer produced · last seen 2022
× 16
-
Plate Round 1 × 1 with Open Stud
× 16
-
Plate Round 1 × 1 with Solid Stud
× 15
-
Brick 1 × 2
× 14
-
Brick 1 × 1
× 14
-
Plate 1 × 3
× 14
-
Plate 1 × 4
× 14
-
Plate 1 × 10
× 12
-
Animal Body Part, Horn (Cattle) / Tentacle / Vine / Branch / Tongue - Long
× 12
-
Brick Special 1 × 4 with 4 Studs on One Side
× 12
-
Tile 1 × 2 with Groove
× 12
-
Tile 1 × 2 with Groove
× 12
-
Wedge Plate 4 × 2 Right
× 12
-
Hinge Plate 1 × 2 Locking with 1 Finger On End, without Groove
× 12
-
Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip]
No longer produced · last seen 2023
× 12
-
Hinge Plate 1 × 2 Locking with 2 Fingers On End, without Groove, 7 Teeth
× 12
-
Plate 2 × 3
× 11
-
Tile Special 1 × 2 Grille with Bottom Groove
× 10
-
Plate 2 × 2 Corner
× 10
-
Wedge Plate 4 × 2 Left
× 10
-
Door Frame 1 × 4 × 6 Type 2
× 10
-
Tile 1 × 1 with Groove
× 9
-
Brick 1 × 4
× 8
-
Plate 2 × 4
× 8
-
Plate 1 × 2
× 8
-
Plate 6 × 12
× 8
-
Tile 2 × 2 with Groove
× 8
-
Tile 1 × 1 with Groove
× 8
-
Tile 1 × 8 with Groove
× 8
-
Plate Round 1 × 1 with Solid Stud
× 8
-
Tile Round 2 × 2 with Bottom Stud Holder
× 8
-
Glass for Window 1 × 4 × 6
× 8
-
Plate Special 2 × 2 with Groove and Center Stud (Jumper)
× 8
-
Bracket 1 × 2 - 1 × 2
× 8
-
Plate 2 × 2 Corner
× 6
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Minifigures 2
Description
Named after the classic eight-stud brick
The name Eight Studs points to the 2x4 brick — arguably the most recognisable LEGO element of all, and a symbol of the stud-and-tube building system that has held the whole hobby together since the 1950s. As a Designer Program set, the concept comes from a fan builder and was voted into production by the community. Referencing the building technique itself, rather than a film licence or vehicle, is an unusual angle and effectively turns the set into a small tribute to the hobby's basic principle.
1,394 pieces, 188 shapes
With 1,394 pieces and 188 unique parts, Eight Studs sits in the mid-to-upper range of the Designer Program line. The relatively low number of unique shapes against a high overall piece count suggests plenty of repeated elements — good news if you enjoy a steady, meditative building rhythm with clear, recognisable patterns. That makes it a reasonably approachable entry point into the Designer Program line, since sections repeat often enough to build confidence quickly. The full colour-by-colour breakdown is listed in the parts list on this page.
An earthy palette: tan, black, green, reddish brown
Tan, black, green and reddish brown dominate the model, combining into a warm, grounded look more associated with landscape or workshop scenes than glossy spaceship or vehicle sets. That combination also lends itself well to reusing parts in other projects with a similar mood, such as nature-themed dioramas or historical settings. If you're stocking up on muted browns and greens for a barn or workshop build of your own, this parts list is a useful source to check first.
Two minifigures, collector focus
Two minifigures come included, pointing towards a small-scale narrative moment rather than a figure-heavy play set. As with other Designer Program models, the build itself takes centre stage rather than re-enacting adventures. For collectors after a distinctive, limited piece with a clear nod to LEGO's own building technique, Eight Studs is a fitting choice — the parts list below helps you judge it properly before buying. It also makes a fitting gift for long-time fans who already own plenty of mainstream theme sets.
FAQ
- How many pieces and minifigures come with 19006?
- Eight Studs includes 1,394 pieces, of which 188 are unique parts, along with two minifigures.
- What does the name Eight Studs refer to?
- It most likely refers to the classic 2x4 brick with eight studs, one of the best-known LEGO elements.
- What colours make up the model?
- Tan, black, green and reddish brown are the main colours. The exact quantities are listed in the parts list on this page.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



