
LEGO® Level Four - Kit 12, Inventor's Lab
Kit 12 of Level Four from the Master Builder Academy is an Inventor's Lab with 208 pieces and 1 minifigure. As the final kit of its level it shows off what the range has taught so far.
- Set number
- 20211
- Year
- 2012
- Pieces
- 208
- Minifigures
- 1
- Different parts
- 62
Parts list 62
-
Tile 1 × 2 with Groove × 16
-
Plate Special 1 × 2 Side Handle [Free Ends] × 12![Plate Special 1 × 2 Side Handle [Free Ends] Black](/media/parts/2540/0/plate-special-1-x-2-side-handle-free-ends-black.jpg)
-
Brick Curved Inverted 6 × 1 No longer produced · last seen 2024 × 12
-
Brick Sloped Inverted 45° 2 × 1 × 10
-
Plate Round 1 × 1 with Solid Stud × 9
-
Brick Sloped 45° 2 × 2 × 8
-
Plate 1 × 2 × 7
-
Plate 2 × 2 Corner × 6
-
Plate Round 2 × 2 with Rounded Bottom [Boat Stud] × 6![Plate Round 2 × 2 with Rounded Bottom [Boat Stud] Light Bluish Gray](/media/parts/2654/71/plate-round-2-x-2-with-rounded-bottom-boat-stud-light-bluish-gray.jpg)
-
Technic Gear 12 Tooth Bevel × 5
-
Brick Special 1 × 2 with Pin No longer produced · last seen 2021 × 4
-
Brick 1 × 1 × 4
-
Plate 1 × 2 × 4
-
Brick Sloped 45° 2 × 1 with Bottom Pin × 4
-
Plate Special 1 × 2 with 1 Stud with Groove (Jumper) No longer produced · last seen 2014 × 4
-
Technic Brick 1 × 6 [5 Pin Holes] × 4![Technic Brick 1 × 6 [5 Pin Holes] Black](/media/parts/3894/0/technic-brick-1-x-6-5-pin-holes-black.jpg)
-
Brick 1 × 2 × 3
-
Brick 1 × 2 × 3
-
Plate 1 × 1 × 3
-
Plate 4 × 6 × 3
-
Plate 1 × 3 × 3
-
Technic Brick 1 × 2 [1 Pin Hole] × 3![Technic Brick 1 × 2 [1 Pin Hole] White](/media/parts/3700/15/technic-brick-1-x-2-1-pin-hole-white.jpg)
-
Tile 1 × 6 with Groove × 3
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 3
-
Tile 1 × 4 with Groove × 2
-
Brick Sloped Inverted 75° 2 × 1 × 3 × 2
-
Brick Special 1 × 1 with Handle × 2
-
Brick 1 × 6 × 2
-
Plate 4 × 8 × 2
-
Plate 1 × 8 × 2
-
Brick 1 × 3 × 2
-
Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] × 2![Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] Tan](/media/parts/3660/19/brick-sloped-inverted-45-2-x-2-ovoid-bottom-pin-bar-sized-stud-holes-tan.jpg)
-
Plate 1 × 6 × 2
-
Technic Axle 4 × 2
-
Technic Axle 6 × 2
-
Technic Plate 2 × 4 [3 Holes] × 2![Technic Plate 2 × 4 [3 Holes] Dark Bluish Gray](/media/parts/3709/72/technic-plate-2-x-4-3-holes-dark-bluish-gray.jpg)
-
Plate 1 × 4 × 2
-
Technic Bush × 2
-
Plate 2 × 6 × 2
-
Tile Special 1 × 1 with Clip with Rounded Tips No longer produced · last seen 2015 × 2
-
Brick Special 1 × 2 with Vertical Clip [Open O Clip] × 2![Brick Special 1 × 2 with Vertical Clip [Open O Clip] Black](/media/parts/30237b/0/brick-special-1-x-2-with-vertical-clip-open-o-clip-black.jpg)
-
Brick Sloped 45° 2 × 1 with Bottom Pin × 2
-
Technic Plate 2 × 6 [5 Holes] × 2![Technic Plate 2 × 6 [5 Holes] Light Bluish Gray](/media/parts/32001/71/technic-plate-2-x-6-5-holes-light-bluish-gray.jpg)
-
Technic Gear 12 Tooth Double Bevel × 2
-
Technic Beam 1 × 5 Thick × 2
-
Technic Gear 36 Tooth Double Bevel × 2
-
Technic Axle Connector Smooth [with x Hole + Orientation] × 2![Technic Axle Connector Smooth [with x Hole + Orientation] Black](/media/parts/59443/0/technic-axle-connector-smooth-with-x-hole-orientation-black.jpg)
-
Technic Plate Rotor 6 Blade with Clip Ends Connected [aka Water Wheel] - Hollow Studs No longer produced · last seen 2017 × 2![Technic Plate Rotor 6 Blade with Clip Ends Connected [aka Water Wheel] - Hollow Studs Black](/media/parts/64566/0/technic-plate-rotor-6-blade-with-clip-ends-connected-aka-water-wheel-hollow-studs-black.jpg)
-
Technic Axle 4 with Stop × 2
-
Tile Round 1 × 1 × 2
-
Plate 2 × 4 × 1
-
Tile 1 × 1 with Groove × 1
-
Brick Sloped 33° 3 × 2 × 1
-
Technic Pin without Friction Ridges Lengthwise × 1
-
Equipment Signal Paddle × 1
-
Technic Plate 1 × 5 with Smooth Ends, 4 Studs and Centre Axle Hole × 1
-
Brick Sloped 75° 2 × 1 × 3 with Hollow Stud × 1
-
Technic Axle 3 × 1
-
Tap 1 × 1 without Hole in Spout × 1
-
Brick Special 1 × 1 Studs on 4 Sides × 1
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Minifigures 1
Description
A workshop as a lesson
At the end of a level the Academy usually offers a model that pulls the earlier techniques together. The Inventor's Lab is such a finale: a building with a technical interior in which design ideas from the preceding kits turn up again. At 208 pieces it stays manageable. The instructions explain not only how to build but why certain connections hold. That means you learn as you go, without it ever feeling like a lesson in a classroom.
Tan, black and dark blue
Tan and black give the model a warm, workshop-like tone, while dark blue and light bluish grey add contrast. It suits a laboratory in which plans, metal and tools come together. Of the 208 pieces, 59 are different types, a fairly moderate variety. That makes both the build and the tidying-up easier. The parts list on this page names every element with its colour and quantity, which helps when you need to replace anything that has gone missing.
For tinkerers and collectors
The set speaks to builders who like to develop ideas of their own, and to collectors who want the Academy kits complete. The single minifigure is meant as the inventor and stands in the lab as its quiet centre. Display the model and you have a small piece of workshop atmosphere on the shelf; rebuild it and you gain a stock of parts for new buildings and machines. Both fit the range, which set out to encourage designing for yourself.
Building on with the stock of parts
The “What can I build?” tool on this page tells you which other sets you could make from these pieces or from your collection. Tan plates and wall elements suit houses, sheds and workshops, while black and dark blue parts work for machines and gadgets. Slopes, windows and small technical pieces are versatile too and will take your own designs further, whether you want another laboratory or something completely different.
FAQ
- How many pieces does the Inventor's Lab have?
- It has 208 pieces, 59 of them different types, and includes 1 minifigure.
- Is it part of a series?
- Yes, it is Kit 12 of Level Four in the Master Builder Academy range from 2012.
- Which colours dominate?
- Mainly tan, black, dark blue and light bluish grey. The parts list shows the exact split.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



