
LEGO® The Leaning Tower of Pisa
Set 21015 from the LEGO Architecture range recreates the Leaning Tower of Pisa, the world-famous bell tower on the Piazza dei Miracoli in Italy. With 345 pieces and no minifigures, this 2013 model focuses entirely on the tower's characteristic tilt and its rounded arch architecture. This page lists every part and colour in detail.
- Set number
- 21015
- Year
- 2013
- Pieces
- 345
- Minifigures
- 0
- Theme
- Architecture
- Different parts
- 40
Parts list 40
-
Brick Round 1 × 1 Open Stud × 86
-
Plate 1 × 1 × 48
-
Brick Arch 1 × 3 × 35
-
Plate Round 1 × 1 with Solid Stud × 28
-
Hinge Plate 1 × 4 Swivel Top / Base - Solid Clip [Complete Assembly] No longer produced · last seen 2022 × 19![Hinge Plate 1 × 4 Swivel Top / Base - Solid Clip [Complete Assembly] White](/media/parts/73983/15/hinge-plate-1-x-4-swivel-top-base-solid-clip-complete-assembly-white.jpg)
-
Plate 1 × 3 × 11
-
Brick 1 × 1 × 10
-
Technic Pin 1/2 without Friction Ridges × 10
-
Technic Pin Connector Round [Slotted] × 10![Technic Pin Connector Round [Slotted] White](/media/parts/62462/15/technic-pin-connector-round-slotted-white.jpg)
-
Tile 2 × 4 with Groove × 9
-
Cylinder Half 2 × 4 × 4 No longer produced · last seen 2021 × 8
-
Tile 1 × 6 with Groove × 8
-
Plate Round 4 × 4 with Pin Hole × 6
-
Plate 1 × 2 × 5
-
Plate 2 × 12 × 4
-
Tile 1 × 2 with Groove × 4
-
Tile 1 × 3 × 4
-
Plate 1 × 8 × 3
-
Tile 1 × 8 with Groove × 3
-
Plate 1 × 10 × 3
-
Plate Special 1 × 2 with Clip Horizontal on End × 3
-
Plate 2 × 12 × 2
-
Plate 1 × 1 × 2
-
Tile 1 × 1 with Groove × 2
-
Plate 1 × 4 × 2
-
Plate Special 1 × 2 with 1 Stud with Groove (Jumper) No longer produced · last seen 2017 × 2
-
Brick Round 2 × 2 with Axle Hole × 2
-
Plate Special 4 × 4 with Studs on One Edge [Plain] × 2![Plate Special 4 × 4 with Studs on One Edge [Plain] Light Bluish Gray](/media/parts/6179/71/plate-special-4-x-4-with-studs-on-one-edge-plain-light-bluish-gray.jpg)
-
Plate Special 1 × 2 [Side Handle Closed Ends] × 2![Plate Special 1 × 2 [Side Handle Closed Ends] Light Bluish Gray](/media/parts/48336/71/plate-special-1-x-2-side-handle-closed-ends-light-bluish-gray.jpg)
-
Brick Round Corner 2 × 2 Macaroni with Stud Notch and Reinforced Underside [New Style] × 2![Brick Round Corner 2 × 2 Macaroni with Stud Notch and Reinforced Underside [New Style] White](/media/parts/85080/15/brick-round-corner-2-x-2-macaroni-with-stud-notch-and-reinforced-underside-new-style-white.jpg)
-
Tile 1 × 2 with Groove × 1
-
Tile 1 × 2 with Groove × 1
-
Antenna 1 × 4 with Rounded Top No longer produced · last seen 2013 × 1
-
Tile 1 × 8 with 'Leaning Tower Of Pisa' Print No longer produced · last seen 2013 × 1
-
Brick Curved 2 × 4 × 1 1/3 × 1
-
Brick Special 2 × 2 with Pin and Axle Hole × 1
-
Technic Brick 1 × 1 with Pin Hole × 1
-
Plate 8 × 8 × 1
-
Brick Round 4 × 4 Centre Hole × 1
-
Brick and Axle Separator v2.0 × 1
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (5)
These extra parts come with the set in case one gets lost.
Description
A landmark built on marble and legend
The real campanile in Pisa began leaning during construction in the 12th century because of unstable ground, and it has been famous ever since for that tilt rather than for its intended role as a bell tower. The LEGO model builds this lean into its core design, resting on a narrow, offset base that makes the tower appear to tip without ever actually falling. The rounded arches of each storey are recreated in simplified but clearly recognisable form. The narrow window openings and the tiered roof section near the top are also recognisably drawn from the real building, without reproducing every detail exactly to scale. This deliberate simplification is typical of the Architecture range, which distils real buildings down to their essential architectural features.
A restrained palette for instant recognition
White and light bluish grey dominate the model, standing in for the original's pale marble, while black forms the base and blue provides a subtle sky-coloured accent. This restrained palette is typical of the LEGO Architecture range, which often brings real buildings to life through form rather than colour variety. That restraint is exactly what makes the model such a calm, elegant display piece for a shelf or office. That restraint also means the model blends easily into different interior styles, from modern to classic.
Just 40 different parts
With only 40 distinct elements among 345 pieces, 21015 is one of the more formally minimal sets of its size, since many storeys are built from repeated arch elements. This page lists every part used with its colour, so you can look up individual bricks, for instance to compare the set against other Architecture models. Anyone collecting several Architecture sets can see from the piece count how differently reduced or detailed individual buildings are within the range.
Building without minifigures
Like many Architecture sets, 21015 comes with no minifigures at all, putting the building itself centre stage. That makes it a calm, almost meditative building project that can be finished in one sitting, and a fitting gift for anyone who loves architecture, travel or Italy. The building process follows a clear, repeating logic from storey to storey, which also makes the set accessible to less experienced builders.
FAQ
- How many pieces does set 21015 have?
- The Leaning Tower of Pisa contains 345 pieces across 40 different parts and colours.
- Does the set include minifigures?
- No, like most LEGO Architecture sets, 21015 comes without any minifigures.
- Which real building does the set depict?
- The set depicts the Leaning Tower of Pisa, the bell tower of Pisa Cathedral in Italy.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



