
LEGO® Futuristic Flyer
Futuristic Flyer is a Creator 3-in-1 set from 2019 with 157 pieces. The same bricks make several models, and the main build is a sleek, science-fiction style aircraft.
- Set number
- 31086
- Year
- 2019
- Pieces
- 157
- Minifigures
- 0
- Theme
- Creator 3-in-1
- Different parts
- 65
Parts list 65
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) × 8
-
Plate 2 × 2 Corner × 6
-
Plate Special 1 × 2 5.9mm Centre Side Towball Socket × 6
-
Plate Special 1 × 1 with Clip Vertical [Thick Open O Clip] × 6![Plate Special 1 × 1 with Clip Vertical [Thick Open O Clip] Dark Bluish Gray](/media/parts/60897/72/plate-special-1-x-1-with-clip-vertical-thick-open-o-clip-dark-bluish-gray.jpg)
-
Plate 2 × 2 Corner × 4
-
Tile 1 × 4 with Groove × 4
-
Plate Special 1 × 2 Side Handle [Free Ends] × 4![Plate Special 1 × 2 Side Handle [Free Ends] Dark Bluish Gray](/media/parts/2540/72/plate-special-1-x-2-side-handle-free-ends-dark-bluish-gray.jpg)
-
Plate 1 × 1 × 4
-
Brick Curved 2 × 1 No Studs [1/2 Bow] × 4![Brick Curved 2 × 1 No Studs [1/2 Bow] Light Bluish Gray](/media/parts/11477/71/brick-curved-2-x-1-no-studs-12-bow-light-bluish-gray.jpg)
-
Plate Special 1 × 2 with 5.9mm Centre Side Towball × 4
-
Flag 2 × 2 Trapezoid with Flat Area between Clips No longer produced · last seen 2021 × 4
-
Cone 1 × 1 [Top Groove] No longer produced · last seen 2020 × 4![Cone 1 × 1 [Top Groove] Trans-Neon Orange](/media/parts/59900/57/cone-1-x-1-top-groove-trans-neon-orange.jpg)
-
Wave / Flame Rounded with Base Rim × 4
-
Brick Sloped 30° 1 × 2 × 2/3 × 4
-
Wheel Holder 2 × 2 Thin with Clips, Plane Single × 3
-
Plate 2 × 4 × 3
-
Plate 2 × 3 × 3
-
Plate 1 × 2 × 3
-
Wheel Centre Small with Stub Axles (Pulley Wheel) × 3
-
Plate 2 × 6 × 3
-
Technic Axle Pin with Friction Ridges Lengthwise × 3
-
Wedge Plate 3 × 4 with Stud Notches [Reinforced Underside] × 3![Wedge Plate 3 × 4 with Stud Notches [Reinforced Underside] White](/media/parts/90194/15/wedge-plate-3-x-4-with-stud-notches-reinforced-underside-white.jpg)
-
Tile 1 × 4 with Groove × 2
-
Plate 2 × 2 × 2
-
Plate 1 × 1 × 2
-
Plate 1 × 1 × 2
-
Tile 2 × 2 with Groove × 2
-
Tile 1 × 2 with Groove × 2
-
Tile 1 × 1 with Groove × 2
-
Technic Brick 1 × 2 [1 Pin Hole] × 2![Technic Brick 1 × 2 [1 Pin Hole] Light Bluish Gray](/media/parts/3700/71/technic-brick-1-x-2-1-pin-hole-light-bluish-gray.jpg)
-
Plate 2 × 6 × 2
-
Hinge Brick 1 × 2 Base × 2
-
Plate Round 2 × 2 with Axle Hole Type 1 (+ Opening) × 2
-
Hinge Brick 2 × 2 Top Plate Thin × 2
-
Tail Shuttle No longer produced · last seen 2019 × 2
-
Bar 2L with Towball × 2
-
Brick Curved Inverted 2 × 1 × 2
-
Brick Wedged, Curved 2 × 1 with Stud Notch Right × 2
-
Brick Wedged, Curved 2 × 1 with Stud Notch Left × 2
-
Brick Special 1 × 4 with 4 Studs on One Side × 2
-
Brick Curved 2 × 2 with Lip, No Studs × 2
-
Plate Special 2 × 2 with Only 2 Studs × 2
-
Wedge Plate 4 × 2 Right × 2
-
Wedge Plate 4 × 2 Left × 2
-
Brick Special 1 × 1 with Stud on 1 Side × 2
-
Plate Special 2 × 2 × 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud] No longer produced · last seen 2023 × 2![Plate Special 2 × 2 × 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud] Light Bluish Gray](/media/parts/99206/71/plate-special-2-x-2-x-23-with-two-studs-on-side-and-two-raised-solid-anti-stud-light-bluish-gray.jpg)
-
Plate 1 × 1 × 1
-
Plate 2 × 8 × 1
-
Brick Curved 4 × 1 No Studs [Stud Holder with Symmetric Ridges] × 1![Brick Curved 4 × 1 No Studs [Stud Holder with Symmetric Ridges] Dark Red](/media/parts/11153/320/brick-curved-4-x-1-no-studs-stud-holder-with-symmetric-ridges-dark-red.jpg)
-
Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle × 1
-
Technic Brick 1 × 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin × 1![Technic Brick 1 × 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin White](/media/parts/32064a/15/technic-brick-1-x-2-with-axle-hole-type-1-opening-and-bottom-pin-white.jpg)
-
Cone 2 × 2 × 2, Open Stud × 1
-
Wedge Plate 12 × 3 Left × 1
-
Wedge Plate 12 × 3 Right × 1
-
Wedge Plate 4 × 6 No longer produced · last seen 2024 × 1
-
Wedge Plate 4 × 6 No longer produced · last seen 2023 × 1
-
Plate Special 1 × 1 with Tooth × 1
-
Wedge Plate 8 × 3, 22° Right × 1
-
Wedge Plate 8 × 3, 22° Left × 1
-
Wedge Plate 2 × 4 × 1
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (5)
These extra parts come with the set in case one gets lost.
Alternative models
A 3-in-1 set: the official LEGO® building instructions contain three models you can build from the same parts. View the official building instructions at LEGO® ↗
Fan models by Rebrickable users that you can build (mostly) from this set’s parts. Instructions are available from the designers.
- Transformer Vic Viper from LEGO Creator set 31086: Futuristic flyer
- Alternate Build 31086 Transformer
- Transformer from Creator 31086: Futuristic flyer
- 31086 Republic Fighter Tank
- A-Wing - 31086
- 31086 Universal jet
- B-Wing - 31086
- X-Wing - 31086
- 31086 Red-White Dragon
- 31086 Convair F-106 Delta Dart
- Lego-31086 - MOC - Modern Fighter Jet
- Swing-Wing - 31086
Description
Three models, one box
The Creator 3-in-1 line promises that one box can produce several models. The main build here is a futuristic flyer with smooth surfaces and a streamlined hull. The alternatives come from the same parts, so after the first build you can start over and make something different. At 157 pieces the set is small enough for an afternoon and large enough to support several build variants sensibly. Nothing about the build is fiddly, so it also works as a first taste of what the 3-in-1 idea can do.
Cool colours, a dark accent
Light bluish grey and white dominate, dark bluish grey provides contrast, and dark red adds a few eye-catching accents. This mix looks technical and suits the theme of the future. With 56 different parts among 157 pieces the variety is decent, which matters for alternate models, because the same parts have to play different roles. There are no minifigures in the box. The dark shade appears mainly on engines and panels and makes the flyer look bigger and stronger than 157 bricks suggest.
Display or fly it around
The flyer can be held up and swooshed around, or simply placed on a shelf or desk as a clean model. With no figures included, the building itself is the point. Children who like to experiment get a task that goes beyond the first model, in the form of the rebuild. Adults looking for a small evening project also get something manageable that does not take over the table. The aircraft is also sturdy enough to stay in the hand without parts dropping off at every swing.
Checking parts, finding ideas
This page shows the full parts list with colours and quantities, which helps when checking second-hand boxes. The "What can I build?" tool also shows which other models you can make from these bricks and your own collection, beyond the three official variants. Light bluish grey and white in particular are useful base colours for spaceships and vehicles. Anyone who likes space or science fiction will also find plenty of parts here for vehicles of their own.
FAQ
- How many pieces does Futuristic Flyer have?
- It has 157 pieces, 56 of them different. No minifigures are included.
- What does 3-in-1 mean?
- The parts in one box can be built into three different models, one after another.
- When was it released?
- It came out in 2019 as part of Creator 3-in-1.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



