
LEGO® Bricktober Hotel
The Bricktober Hotel is a small promotional LEGO® set from 2015 with 204 pieces. Like the bakery, it belongs to the Bricktober series and shows a hotel building in miniature.
- Set number
- 40141
- Year
- 2015
- Pieces
- 204
- Minifigures
- 0
- Theme
- Bricktober
- Different parts
- 60
Parts list 60
-
Brick 1 × 1 × 24
-
Plant, Flower, Plate Round 1 × 1 with 4 Petals No longer produced · last seen 2019 × 12
-
Brick Special 1 × 2 with Masonry Brick Profile × 12
-
Plate 1 × 1 × 8
-
Brick 1 × 2 × 7
-
Plate 2 × 4 × 7
-
Brick 1 × 1 × 6
-
Panel 1 × 2 × 1 [Square Corners] No longer produced · last seen 2016 × 6![Panel 1 × 2 × 1 [Square Corners] Trans-Clear](/media/parts/4865a/47/panel-1-x-2-x-1-square-corners-trans-clear.jpg)
-
Plate 2 × 3 × 5
-
Plate 1 × 3 × 5
-
Plate Special 1 × 2 with Door Rail × 5
-
Technic Pin with Friction Ridges Lengthwise and Center Slots No longer produced · last seen 2021 × 4
-
Plate 1 × 2 × 4
-
Plate 1 × 2 × 4
-
Brick Round 1 × 1 Open Stud × 4
-
Tile 1 × 1 with Groove × 4
-
Plate 1 × 4 × 4
-
Plate Round 1 × 1 with Solid Stud × 4
-
Plate Round 1 × 1 with Solid Stud × 4
-
Equipment Telescope / Torch / Spyglass, Support Round 1 × 1 × 1 2/3 × 4
-
Plate 2 × 4 × 3
-
Plate 1 × 1 × 3
-
Plate 1 × 1 × 3
-
Tile 1 × 1 with Groove × 3
-
Plate 1 × 4 × 3
-
Tile 1 × 3 × 3
-
Brick 1 × 1 × 2
-
Plate 1 × 2 × 2
-
Plate 1 × 1 × 2
-
Plate 4 × 8 × 2
-
Tile 1 × 1 with Groove × 2
-
Tile 1 × 1 with Groove × 2
-
Plate 1 × 3 × 2
-
Plate Round 1 × 1 with Solid Stud × 2
-
Plate Round 1 × 1 with Solid Stud × 2
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) × 2
-
Technic Brick 1 × 2 [2 Pin Holes] × 2![Technic Brick 1 × 2 [2 Pin Holes] White](/media/parts/32000/15/technic-brick-1-x-2-2-pin-holes-white.jpg)
-
Plate Special 1 × 2 with Door Rail × 2
-
Plant, Flower, Plate Round 1 × 1 with 4 Petals No longer produced · last seen 2017 × 2
-
Plate Special 1 × 1 with Clip Light, Bar Hole [Thick Ring] × 2![Plate Special 1 × 1 with Clip Light, Bar Hole [Thick Ring] Black](/media/parts/4081b/0/plate-special-1-x-1-with-clip-light-bar-hole-thick-ring-black.jpg)
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 2
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 2
-
Cone 1 × 1 [Top Groove] × 2![Cone 1 × 1 [Top Groove] Reddish Brown](/media/parts/59900/70/cone-1-x-1-top-groove-reddish-brown.jpg)
-
Tile 1 × 3 × 2
-
Creature Body Part, Horn (Unicorn) × 2
-
Tile Special 1 × 2 Grille with Bottom Groove × 1
-
Tile 1 × 4 with Groove × 1
-
Plate 1 × 2 × 1
-
Plate 1 × 2 × 1
-
Plate 1 × 1 × 1
-
Plate 1 × 1 × 1
-
Tile 1 × 2 with Groove × 1
-
Plate 1 × 3 × 1
-
Plate 1 × 6 × 1
-
Sticker Sheet for Set 40141-1 No longer produced · last seen 2015 × 1![Sticker Sheet for Set 40141-1 [No Color/Any Color]](/media/parts/22266/9999/sticker-sheet-for-set-40141-1-no-colorany-color.jpg)
-
Panel 1 × 2 × 1 [Square Corners] No longer produced · last seen 2017 × 1![Panel 1 × 2 × 1 [Square Corners] White](/media/parts/4865a/15/panel-1-x-2-x-1-square-corners-white.jpg)
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
-
Equipment Telescope / Torch / Spyglass, Support Round 1 × 1 × 1 2/3 × 1
-
Tile 2 × 4 with Groove × 1
-
Brick Special 1 × 2 with Masonry Brick Profile × 1
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (21)
These extra parts come with the set in case one gets lost.
-
Technic Pin with Friction Ridges Lengthwise and Center Slots No longer produced · last seen 2021 × 1
-
Plate 1 × 1 × 1
-
Plate 1 × 1 × 1
-
Plate 1 × 1 × 1
-
Plate 1 × 1 × 1
-
Plate 1 × 1 × 1
-
Plate 1 × 1 × 1
-
Tile 1 × 1 with Groove × 1
-
Tile 1 × 1 with Groove × 1
-
Tile 1 × 1 with Groove × 1
-
Tile 1 × 1 with Groove × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Plant, Flower, Plate Round 1 × 1 with 4 Petals No longer produced · last seen 2017 × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
-
Equipment Telescope / Torch / Spyglass, Support Round 1 × 1 × 1 2/3 × 1
Description
A hotel that fits on a desk
At 204 pieces this hotel is one of the smaller sets, and it manages without any minifigures. You build a slim, decorative facade reminiscent of a city hotel, which suits a shelf or a windowsill. The build does not take long and is easy enough for beginners. If you collect the Bricktober buildings as a series, this adds another piece to the little row of houses that the individual models can form when you stand them side by side.
Tan and light blue as a quiet palette
The main colours are tan, trans-light blue, light bluish grey and white. The effect is friendly and a little nostalgic, like a hotel by the sea or in an old town. The transparent light blue stands for glass and windows, tan and white for the facade, and grey for the base and details. Because all the colours sit close together, the finished building looks cohesive and restrained, which suits a display model that does without figures or play accessories.
Low variety, easy to survey
Only 31 different part types are spread across the 204 pieces. That means most bricks and plates appear several times, and the build quickly settles into a rhythm. For collectors it also means that missing parts are easy to replace, since there are hardly any rare special shapes. The complete parts list with colours and quantities is further down the page, so you can check completeness or plan replacements at your own pace.
Building on with what you have
Once it is built you can of course leave the hotel standing, but the parts also work well in other projects. The What can I build? tool shows which other sets you could put together from these bricks and the rest of your collection. Tan plates and transparent window elements are equally useful in houses, stations and castles, so the small box doubles as a source of parts for completely different ideas.
FAQ
- How many pieces does the Bricktober Hotel have?
- 204 pieces in 31 part types. No minifigures are included.
- Which colours does the set use?
- Tan, trans-light blue, light bluish grey and white.
- Does it go with other Bricktober models?
- Yes, it belongs to the same series and can stand with the other buildings as a small row of houses.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



