
LEGO® Kamino Training Facility
Kamino Training Facility is a compact 190-piece Star Wars set recreating a training base from the ocean planet Kamino. Three minifigures and 75 unique elements keep the build varied despite its modest size. This page covers all the facts, colours and the full parts list.
- Set number
- 40765
- Year
- 2025
- Pieces
- 190
- Minifigures
- 3
- Theme
- Star Wars
- Different parts
- 75
Parts list 75
-
Plate Round 1 × 1 with Solid Stud × 11
-
Brick Wedged, Sloped 45° 2 × 2 Corner × 8
-
Tile Special 1 × 2 Grille with Bottom Groove × 8
-
Plate 2 × 2 Corner × 6
-
Plate 1 × 2 × 6
-
Plate Special 1 × 1 × 2/3 Half Round with Side Stud × 6
-
Tile Round 1 × 1 × 6
-
Plate 2 × 3 × 5
-
Plate 2 × 2 × 5
-
Wedge Plate 2 × 2 Cut Corner × 5
-
Plate Special 1 × 2, Top Clip [Open O] × 5![Plate Special 1 × 2, Top Clip [Open O] Light Bluish Gray](/media/parts/44861/71/plate-special-1-x-2-top-clip-open-o-light-bluish-gray.jpg)
-
Plate Special Round 1 × 1 with Hollow Stud and Horizontal Bar 1L × 4
-
Plate Special 1 × 2 Rounded with 2 Open Studs × 4
-
Brick Wedged 2 × 2 Facet × 4
-
Brick 2 × 2 × 3
-
Brick Curved 2 × 1 No Studs [1/2 Bow] × 3![Brick Curved 2 × 1 No Studs [1/2 Bow] White](/media/parts/11477/15/brick-curved-2-x-1-no-studs-12-bow-white.jpg)
-
Tile 1 × 1 with Groove × 3
-
Brick Special 1 × 2 with Studs on 2 Sides × 3
-
Plate 1 × 4 × 2
-
Plate 2 × 6 × 2
-
Brick Sloped 33° 3 × 1 × 2
-
Brick Arch 1 × 3 × 1 2/3 Curved Top × 2
-
Brick Round Corner, Curved 2 × 2 × 1 2/3 Quarter Dome with 1 Cutout × 2
-
Brick Curved 4 × 1 No Studs [Stud Holder with Symmetric Ridges] × 2![Brick Curved 4 × 1 No Studs [Stud Holder with Symmetric Ridges] White](/media/parts/11153/15/brick-curved-4-x-1-no-studs-stud-holder-with-symmetric-ridges-white.jpg)
-
Brick Special 1 × 2 with 2 Studs on 1 Side × 2
-
Tile Special 1 × 2 Grille with Bottom Groove × 2
-
Cylinder Half 2 × 4 × 2 with 1 × 2 Cutout × 2
-
Wedge Plate 2 × 2 Cut Corner × 2
-
Brick Special 1 × 4 with 4 Studs on One Side × 2
-
Technic Brick 1 × 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin × 2![Technic Brick 1 × 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin White](/media/parts/32064a/15/technic-brick-1-x-2-with-axle-hole-type-1-opening-and-bottom-pin-white.jpg)
-
Brick Special 1 × 1 × 1 2/3 with Studs on 1 Side × 2
-
Plate Special 2 × 2 with Only 2 Studs × 2
-
Bracket 2 × 2 with 1 × 2 Vertical Studs × 2
-
Weapon Gun / Blaster Long (Star Wars) × 2
-
Turntable 4 × 4 Square Base, Locking × 2
-
Bracket 1 × 1 - 1 × 2 Inverted × 2
-
Brick Round Corner, Curved 3 × 3 × 1 Quarter Circle × 2
-
Plate Special 1 × 2 with Clip Vertical on End × 2
-
Bracket 1 × 1 - 1 × 2 × 2
-
Tile 3 × 3 Curved, Macaroni × 2
-
Plate 1 × 1 × 2/3 with Open Stud × 2
-
Brick Round 4 × 4 Centre Hole × 2
-
Brick Special 1 × 1 with Stud on 1 Side × 2
-
Bracket 1 × 2 - 2 × 2 Inverted × 2
-
Tile 1 × 4 with Groove × 1
-
Brick Sloped Inverted 33° 3 × 2, Connections between Studs, Round Bottom Pin × 1
-
Plate 2 × 2 × 1
-
Plate 4 × 4 × 1
-
Plate 2 × 8 × 1
-
Tile 2 × 2 with Groove × 1
-
Plate 1 × 8 × 1
-
Plate 1 × 6 × 1
-
Turntable 2 × 2 Plate - Top × 1
-
Turntable 2 × 2 Plate, Base × 1
-
Plate Special 1 × 1 with Clip Light, Bar Hole [Thick Ring] × 1![Plate Special 1 × 1 with Clip Light, Bar Hole [Thick Ring] Light Bluish Gray](/media/parts/4081b/71/plate-special-1-x-1-with-clip-light-bar-hole-thick-ring-light-bluish-gray.jpg)
-
Technic Axle 3 × 1
-
Tile 1 × 6 with Groove × 1
-
Tile Special 1 × 1 with Clip with Rounded Edges × 1
-
Bar Holder with Hole and Bar Handle × 1
-
Tile 2 × 3 × 1
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (5)
These extra parts come with the set in case one gets lost.
Minifigures 3
-
Clone Cadet
× 3
Alternative models
Fan models by Rebrickable users that you can build (mostly) from this set’s parts. Instructions are available from the designers.
- 40765-2: Kamino Training Starfighter
- 40765 Prototype Slave 1
- 40765 - General Grievous Bust
- 40765 SW Fortified Blaster Tower (Alternate Build)
- Kamino Training Swamp Speeder - 40765 alternative
- 40765 Star-Destroyer and Blaster Tower ALTERNATE BUILD
- "Freeco Speeder" 40765 GWP alternative build (MOC)
- "Clone Training FIghter" 40765 GWP alternative build (MOC)
- "Clone Training Dropship" 40765 GWP alternative build (MOC)
- Clone Starfighter 40765 | ALTERNATE BUILD LEGO Kamino Training Facility
- 40765 Alt: Kamino Training Star Ship
- Training Gunship
Description
A Corner of the Ocean Planet
Kamino is the rain-soaked ocean world introduced in Star Wars: Attack of the Clones, home to the cloning facilities that produced the Republic's army. This set recreates a slice of that architecture in miniature: white domed panels, dark grey supports and pale blue transparent pieces standing in for the endless water below. At 190 pieces it's a focused build rather than a sprawling diorama, concentrating on the shapes that make Kamino instantly recognisable – sloped roofs, narrow walkways and clean geometric lines.
A Quick Build With Character
With 75 unique parts, the model rewards a closer look at how a small footprint can still suggest scale. Builders used to larger Star Wars sets will notice how much of the Kamino silhouette survives the size reduction, and the set slots naturally next to other clone-themed builds on a shelf. It's a sensible pick for a shorter building session, a gift for a younger fan, or an addition to an existing collection without committing to a large display case.
Three Clone-Era Minifigures
Three minifigures round out the set, fitting the training-ground theme the location is known for in the films. They can be posed on the platform itself or pulled into wider battles alongside figures from other clone army sets. Because helmets, armour pieces and weapons are frequently shared across the Star Wars range, it's worth checking the parts list on this page before buying, particularly if you're hoping to mix and match with figures already on your shelf.
Colours Worth Noting
The build leans on a tight palette of white, black, trans-light blue and dark bluish grey, which keeps the finished model looking clean and gives the transparent pieces room to stand out. The full parts list below breaks down all 75 elements individually, useful for checking colours before you start, tracking down a specific piece for another project, or simply seeing how the set is put together before it arrives.
FAQ
- How many pieces does the Kamino Training Facility set have?
- Set 40765 contains 190 pieces and 75 unique elements.
- Does it include minifigures?
- Yes, three minifigures are included, fitting the Kamino training theme.
- Who is this set aimed at?
- Star Wars fans looking for a shorter build or wanting to expand a collection of clone-era sets.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.




