
LEGO® The Goblin King's Evil Dragon
The Goblin King's Evil Dragon 41183 builds the fearsome creature belonging to the villain of the LEGO® Elves range: a dragon in dark green and black tones. With 339 pieces and a single minifigure, this is a set built around one striking fantasy creature rather than a scene with several characters.
- Set number
- 41183
- Year
- 2017
- Pieces
- 339
- Minifigures
- 1
- Theme
- Elves
- Different parts
- 141
Parts list 141
-
Brick Curved 2 × 2 × 2/3 × 9
-
Creature Body Part, Barb Large (Claw, Talon) with Clip × 8
-
Plate Special 1 × 1 Rounded with Handle × 8
-
Plate Special 1 × 1 with Vertical Tooth No longer produced · last seen 2018 × 7
-
Brick Curved Inverted 2 × 1 No longer produced · last seen 2019 × 7
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium × 7
-
Plate 1 × 2 × 6
-
Plate 1 × 2 × 6
-
Brick Curved 2 × 1 No Studs [1/2 Bow] × 6![Brick Curved 2 × 1 No Studs [1/2 Bow] Yellowish Green](/media/parts/11477/158/brick-curved-2-x-1-no-studs-12-bow-yellowish-green.jpg)
-
Tile Round 2 × 2 with Bottom Stud Holder × 6
-
Plate Special 1 × 1 with Tooth × 6
-
Brick 1 × 1 × 5
-
Tile Special 1 × 2 with Two Vertical Teeth / Tooth No longer produced · last seen 2024 × 5
-
Tile Special 1 × 1 with Clip with Rounded Edges × 5
-
Bar Holder with Hole and Bar Handle × 5
-
Plate 1 × 2 × 4
-
Technic Brick 1 × 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin × 4![Technic Brick 1 × 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin Black](/media/parts/32064a/0/technic-brick-1-x-2-with-axle-hole-type-1-opening-and-bottom-pin-black.jpg)
-
Plate 1 × 4 × 4
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) No longer produced · last seen 2017 × 4
-
Hinge Plate 1 × 2 Locking with 1 Finger On Top × 4
-
Hinge Plate 1 × 2 Locking with 2 Fingers On End, with Groove, 9 Teeth No longer produced · last seen 2020 × 4
-
Plate Round 1 × 1 with Solid Stud × 4
-
Bracket 1 × 2 - 2 × 2 × 4
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small × 4
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 4
-
Plate Round 1 × 1 with Open Stud × 4
-
Tile Round 1 × 1 × 4
-
Bracket 1 × 2 - 2 × 2 Inverted × 4
-
Plate 2 × 2 Corner × 3
-
Plate Round 2 × 2 with Rounded Bottom [Boat Stud] × 3![Plate Round 2 × 2 with Rounded Bottom [Boat Stud] Magenta](/media/parts/2654/26/plate-round-2-x-2-with-rounded-bottom-boat-stud-magenta.jpg)
-
Plate 2 × 2 × 3
-
Plate 1 × 2 × 3
-
Plate 1 × 1 × 3
-
Cone 1 × 1 Inverted with Bar at Bottom (Ice Cream Cone) × 3
-
Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle × 3
-
Brick Sloped 45° 1 × 1 × 2/3 Quadruple Convex [Pyramid] × 3![Brick Sloped 45° 1 × 1 × 2/3 Quadruple Convex [Pyramid] Trans-Light Blue](/media/parts/22388/41/brick-sloped-45-1-x-1-x-23-quadruple-convex-pyramid-trans-light-blue.jpg)
-
Brick Sloped 45° 2 × 1 with Bottom Pin × 3
-
Tile 1 × 2 with Groove × 3
-
Plate Round 1 × 1 with Solid Stud × 3
-
Technic Brick Special 2 × 2 with Ball Socket Wide and Axle Hole No longer produced · last seen 2021 × 3
-
Technic Axle Connector 2 × 3 with Ball Socket, Open Lower Axle Holes No longer produced · last seen 2021 × 3
-
Plate 2 × 2 Corner × 2
-
Plate 2 × 4 × 2
-
Plate 2 × 2 × 2
-
Plate 1 × 2 × 2
-
Plate 1 × 1 × 2
-
Plate 1 × 1 × 2
-
Brick 1 × 2 without Bottom Tube No longer produced · last seen 2019 × 2
-
Plate Special 3 × 2 with Rounded End, Hole × 2
-
Plate 1 × 3 × 2
-
Brick Arch 1 × 4 × 2
-
Technic Brick 1 × 4 [3 Pin Holes] × 2![Technic Brick 1 × 4 [3 Pin Holes] Lime](/media/parts/3701/27/technic-brick-1-x-4-3-pin-holes-lime.jpg)
-
Plate 1 × 4 × 2
-
Brick Arch 1 × 3 × 2 Curved Top × 2
-
Technic Brick 1 × 1 with Pin Hole × 2
-
Brick Curved 4 × 1 No Studs [Stud Holder with Symmetric Ridges] × 2![Brick Curved 4 × 1 No Studs [Stud Holder with Symmetric Ridges] Reddish Brown](/media/parts/11153/70/brick-curved-4-x-1-no-studs-stud-holder-with-symmetric-ridges-reddish-brown.jpg)
-
Brick Curved 2 × 1 No Studs [1/2 Bow] × 2![Brick Curved 2 × 1 No Studs [1/2 Bow] Black](/media/parts/11477/0/brick-curved-2-x-1-no-studs-12-bow-black.jpg)
-
Plate Special 1 × 2 with 5.9mm Towball Socket and Towball × 2
-
Tile 2 × 2 Corner × 2
-
Brick Curved 2 × 2 × 2/3 × 2
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (20)
These extra parts come with the set in case one gets lost.
-
Plate Round 1 × 1 with Solid Stud × 2
-
Plate 1 × 1 × 1
-
Plate 1 × 1 × 1
-
Plate 1 × 1 × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Brick Sloped 45° 1 × 1 × 2/3 Quadruple Convex [Pyramid] × 1![Brick Sloped 45° 1 × 1 × 2/3 Quadruple Convex [Pyramid] Trans-Bright Green](/media/parts/22388/35/brick-sloped-45-1-x-1-x-23-quadruple-convex-pyramid-trans-bright-green.jpg)
-
Brick Sloped 45° 1 × 1 × 2/3 Quadruple Convex [Pyramid] × 1![Brick Sloped 45° 1 × 1 × 2/3 Quadruple Convex [Pyramid] Trans-Light Blue](/media/parts/22388/41/brick-sloped-45-1-x-1-x-23-quadruple-convex-pyramid-trans-light-blue.jpg)
-
Plant, Cherries × 1
-
Weapon Spear Tip with Fins × 1
-
Tile Round 1 × 1 Quarter × 1
-
Plant, Flower, Plate Round 1 × 1 with 4 Petals No longer produced · last seen 2021 × 1
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small × 1
-
Technic Ball Joint with Through Axle Hole × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) No longer produced · last seen 2019 × 1
-
Plate Round 1 × 1 with Open Stud × 1
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium × 1
-
Bar 3L × 1
-
Tile Round 1 × 1 × 1
-
Tile Round 1 × 1 with Padlock Print No longer produced · last seen 2018 × 1
-
Tile Round 1 × 1 with Pearl Gold Evil Eye Print No longer produced · last seen 2017 × 1
Minifigures 1
-
Goblin King
× 1
Alternative models
Fan models by Rebrickable users that you can build (mostly) from this set’s parts. Instructions are available from the designers.
View the idea at Rebrickable ↗
What can I build with it?Description
A dragon rather than a human-shaped cast
The build centres on a creature rather than a vehicle or building: a dragon made mostly from black and dark bluish grey, with strong accents in yellowish green and lime. That toxic-looking colour combination reinforces the character's villainous role and stands well apart from the brighter, friendlier tones used in other Elves sets. At 339 pieces the build stays compact, but it still has to capture the complex shape of wings, head and body rather than straight walls or vehicle panels. Moveable joints at the wings and jaw let the finished dragon be posed in a few different ways.
One minifigure, one antagonist
Only one minifigure comes with the set: the Goblin King himself, the antagonist of the Elves stories. That makes the set less suited to multi-character scenes and more useful as an addition to an existing Elves collection, adding a central villain along with his creature. Anyone who already owns Elves minifigures from other sets can slot this antagonist straight in without needing an entirely new building to go alongside it, and can pair it with other sets for larger scenes.
141 different elements for a complex shape
Of the 339 pieces, 141 are different elements, a share that suits the curved, irregular shapes needed for a dragon's body. Wings, claws and head all call for more specialised parts than a square building would, which shows up in the comparatively high variety of pieces. That makes for a technically more interesting build, even though the total piece count of 339 sits in the mid-range.
For fans of fantasy creatures
This set suits anyone after a creature build rather than another vehicle or building, as well as Elves collectors looking to add the Goblin King as an antagonist. The parts list on this page shows all 141 different elements, useful for checking which shades of green and black are included before deciding on the set.
FAQ
- How many pieces does The Goblin King's Evil Dragon 41183 have?
- The set has 339 pieces, including 141 different elements, plus one minifigure.
- What does the set actually build?
- A dragon creature belonging to the Goblin King, the villain of the LEGO® Elves range.
- Why is there only one minifigure?
- The set focuses on the dragon creature and its accompanying villain figure rather than a multi-character scene.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



