
LEGO® Rotor Rescue
Rotor Rescue (5866-1) belongs to the Creator line and was released in 2010 as a 3-in-1 set. It has 149 pieces and no minifigures. This page lists the complete parts list so you can check your copy or plan a rebuild.
- Set number
- 5866
- Year
- 2010
- Pieces
- 149
- Minifigures
- 0
- Theme
- Creator 3-in-1
- Different parts
- 66
Parts list 66
-
Plate Round 1 × 1 with Solid Stud × 7
-
Brick Sloped Inverted 33° 3 × 1 with Internal Stopper and No Front Stud Connection × 6
-
Brick Special 1 × 1 with Stud on 1 Side × 6
-
Plate 2 × 2 × 5
-
Plate 2 × 10 × 5
-
Brick 1 × 2 without Bottom Tube × 4
-
Tile 1 × 2 with Groove × 4
-
Tile 1 × 1 with Groove × 4
-
Brick 1 × 3 × 4
-
Plate Special 1 × 2 with 1 Stud without Groove (Jumper) No longer produced · last seen 2014 × 4
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 4
-
Plate 1 × 12 × 4
-
Brick Curved 4 × 1 No Studs [Stud Holder with Asymmetric Ridges] No longer produced · last seen 2012 × 4![Brick Curved 4 × 1 No Studs [Stud Holder with Asymmetric Ridges] Red](/media/parts/61678/4/brick-curved-4-x-1-no-studs-stud-holder-with-asymmetric-ridges-red.jpg)
-
Plate 2 × 4 × 3
-
Plate 1 × 2 × 3
-
Plate 1 × 4 × 3
-
Brick Sloped Inverted 45° 4 × 2 Double with 2 × 2 Recessed × 3
-
Brick Curved 3 × 1 No Studs × 3
-
Tile Special 1 × 2 Grille with Bottom Groove × 2
-
Plate 2 × 2 Corner × 2
-
Tile 1 × 4 with Groove × 2
-
Propeller 4 Blade 5 Diameter with Rounded Ends, Open Hub No longer produced · last seen 2021 × 2
-
Technic Pin with Friction Ridges Lengthwise and Center Slots No longer produced · last seen 2021 × 2
-
Brick Special 1 × 2 with Grille × 2
-
Brick 1 × 1 × 2
-
Plate 2 × 4 × 2
-
Plate 2 × 4 × 2
-
Plate 2 × 3 × 2
-
Plate 2 × 2 × 2
-
Plate 1 × 1 × 2
-
Plate 1 × 1 × 2
-
Plate 1 × 1 × 2
-
Plate 4 × 4 × 2
-
Brick Round 2 × 2 × 2 Robot Body, Axle Holder '+' Orientation No longer produced · last seen 2024 × 2
-
Tile 2 × 2 with Groove × 2
-
Plate 1 × 6 × 2
-
Cone 2 × 2 × 2, Open Stud × 2
-
Technic Brick 1 × 1 with Pin Hole × 2
-
Plate Special 1 × 2 [Side Handle Closed Ends] × 2![Plate Special 1 × 2 [Side Handle Closed Ends] Light Bluish Gray](/media/parts/48336/71/plate-special-1-x-2-side-handle-closed-ends-light-bluish-gray.jpg)
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 2
-
Cone 1 × 1 [Top Groove] × 2![Cone 1 × 1 [Top Groove] Light Bluish Gray](/media/parts/59900/71/cone-1-x-1-top-groove-light-bluish-gray.jpg)
-
Plate Special 1 × 1 with Clip Horizontal [Thick Open O Clip] × 2![Plate Special 1 × 1 with Clip Horizontal [Thick Open O Clip] Light Bluish Gray](/media/parts/61252/71/plate-special-1-x-1-with-clip-horizontal-thick-open-o-clip-light-bluish-gray.jpg)
-
Brick Sloped 18° 2 × 1 × 2/3 with 4 Slots / Grate × 2
-
Plate Special 2 × 2 with 1 Pin Hole [Split Underside Ribs] No longer produced · last seen 2013 × 1![Plate Special 2 × 2 with 1 Pin Hole [Split Underside Ribs] Dark Bluish Gray](/media/parts/2444/72/plate-special-2-x-2-with-1-pin-hole-split-underside-ribs-dark-bluish-gray.jpg)
-
Tile Special 2 × 2 with Top Pin No longer produced · last seen 2023 × 1
-
Brick 1 × 2 × 1
-
Brick Sloped 45° 2 × 1 with Bottom Pin × 1
-
Brick Sloped 33° 3 × 2 × 1
-
Plate 1 × 3 × 1
-
Brick Sloped Inverted 45° 2 × 1 × 1
-
Technic Pin without Friction Ridges Lengthwise × 1
-
Plate 2 × 6 × 1
-
Plate 2 × 10 × 1
-
Equipment Weapon, Loudhailer / Speaker / Blaster / Space Gun × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Tile Special 1 × 1 with Clip with Rounded Tips No longer produced · last seen 2015 × 1
-
Brick Curved 2 × 2, Two Top Studs × 1
-
Equipment Zip Line Handle × 1
-
Wedge Plate 4 × 2 Right × 1
-
Wedge Plate 4 × 2 Left × 1
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (8)
These extra parts come with the set in case one gets lost.
-
Technic Pin with Friction Ridges Lengthwise and Center Slots No longer produced · last seen 2021 × 1
-
Tile 1 × 1 with Groove × 1
-
Technic Pin without Friction Ridges Lengthwise × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
Alternative models
A 3-in-1 set: the official LEGO® building instructions contain three models you can build from the same parts. View the official building instructions at LEGO® ↗
Fan models by Rebrickable users that you can build (mostly) from this set’s parts. Instructions are available from the designers.
- 5866 passenger hovercraft
- 5866 AH-64 Apache
- 5866 Propeller Plane
- 5866 Fighter Jet
- 5866 Ferry
- 5866 alt buid - Sunny day on the sea
- 5866 Motorboat
- 5866 Twin Spin Helicopter
- 5866 Alternative helicopter
- 5866 Nano Car
- Westland Lynx
- Traditional/Modern Space Barge
Description
One set, three models
Creator 3-in-1 means the same bricks can be built into three different models, each with its own set of instructions. You decide what comes out of the box and can rebuild after the first model. That makes a small set of 149 pieces last much longer than the number suggests. The name Rotor Rescue points to a rescue vehicle with a rotor, but with Creator sets it is worth looking at the other instructions too, because they hold quite different ideas.
Yellow, grey and red
The main colours are yellow, light bluish grey, red and dark bluish grey. These are classic signal colours for rescue and service models: yellow and red catch the eye, while the greys give the build a technical base. With 57 different part types among the 149 pieces the choice is broad, so the three models can really differ in shape and construction. If you like these colours, you will find them again in other vehicle builds as well.
Build, rebuild, keep going
With no minifigures in the box, the set speaks mainly to builders who enjoy trying out constructions. The finished models are good for play because they are small and can be moved by hand, for example flown across the room. If you like rebuilding, take everything apart after the first model and build the second variant. With a bit of courage to experiment, a fourth model of your own may follow that appears in none of the instructions.
The parts list as a helper
The parts list on this page shows each element with its colour and quantity. Use it to check that a second-hand set is complete before you start rebuilding, because with three sets of instructions a missing piece soon shows up. The "What can I build?" tool also tells you which other sets become possible with your stock plus the parts from Rotor Rescue. That turns the small set into a building block for larger projects.
FAQ
- What does 3-in-1 mean for Rotor Rescue?
- The 149 pieces can be built into three different models using separate instructions, one model after another.
- Are there minifigures included?
- No, set 5866-1 has no minifigures. It is aimed at builders who like to try out constructions.
- Which colours are used?
- Mostly yellow, light bluish grey, red and dark bluish grey. The pieces cover 57 part types.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



