
Coast Guard Helicopter
The Coast Guard Helicopter 60013 is a 2013 LEGO® City set built around sea rescue, pairing a helicopter with a small boat. At 230 pieces it sits in the compact end of the range, quick to build but detailed enough to stand on its own. Four minifigures turn it into an active play set rather than a static display piece.
- Set number
- 60013
- Year
- 2013
- Pieces
- 230
- Minifigures
- 4
- Theme
- Coast Guard
- Different parts
- 108
Parts list 108
-
Technic Plate 1 × 5 with Smooth Ends, 4 Studs and Centre Axle Hole
× 12
-
Plate 1 × 6
× 8
-
Plate Special 2 × 16 with Angled Side Extensions and Hole (Rotor Blade)
× 6
-
Plate 1 × 2
× 5
-
Plate 1 × 4
× 4
-
Brick Sloped Inverted 33° 3 × 2, Connections between Studs, Ovoid Bottom Pin
× 4
-
Brick Curved 1 × 2 × 1 1/3 with Curved Top
× 4
-
Brick Curved 2 × 2 × 2/3 Two Studs and Curved Slope End
× 4
-
Tyre 14 × 4 Smooth Small Single [New Style]
× 4
-
Glass for Window 1 × 2 × 2 Flat
× 4
-
Tile 1 × 3
× 4
-
Plate Special 2 × 2 with 1 Pin Hole [Split Underside Ribs]
No longer produced · last seen 2013
× 3
-
Technic Pin with Friction Ridges Lengthwise and Center Slots
No longer produced · last seen 2021
× 3
-
Plate 1 × 2
× 3
-
Plate 1 × 2
× 3
-
Plate 4 × 4
× 3
-
Plate Special 1 × 2 with 1 Stud with Groove (Jumper)
No longer produced · last seen 2014
× 3
-
Brick Sloped 30° 1 × 2 × 2/3
× 3
-
Panel 1 × 2 × 2 [Side Supports / Hollow Studs]
× 3
-
Wheel Holder 2 × 2 Thin with Clips, Plane Single
× 2
-
Tile Special 1 × 2 with Handle
× 2
-
Plate 2 × 12
× 2
-
Brick 1 × 2
× 2
-
Plate 2 × 4
× 2
-
Plate 2 × 4
× 2
-
Plate 2 × 2
× 2
-
Brick Sloped 45° 2 × 4
× 2
-
Wheel Centre Small with Stub Axles (Pulley Wheel)
No longer produced · last seen 2023
× 2
-
Brick 1 × 3
× 2
-
Plate 1 × 6
× 2
-
Plate 1 × 6
× 2
-
Plate 1 × 4
× 2
-
Plate 1 × 10
× 2
-
Wheel 8 × 6
No longer produced · last seen 2017
× 2
-
Engine Centre - Smooth Large
No longer produced · last seen 2021
× 2
-
Brick Curved 2 × 3
× 2
-
Brick Curved 4 × 1 No Studs [Stud Holder with Symmetric Ridges]
× 2
-
Plate Special 1 × 2 with Pin Hole on Top
× 2
-
Hinge Plate 1 × 8 Locking with Angled Side Extensions, Squared Plate Underside, 7 Teeth
No longer produced · last seen 2013
× 2
-
Tile Special 1 × 2 Grille with Bottom Groove
× 2
-
Lever Small Base with Black Lever
× 2
-
Hinge Plate 1 × 2 Locking with 1 Finger On Top
× 2
-
Brick Sloped 45° 2 × 1 with Bottom Pin
× 2
-
Tile 1 × 1 with Groove
× 2
-
Tile 1 × 1 with Groove
× 2
-
Brick Curved Inverted 6 × 1
× 2
-
Brick Curved 6 × 2
× 2
-
Engine Smooth Large [2 × 2 Thin Top Plate]
No longer produced · last seen 2015
× 2
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 2
-
Minifig Footwear Flipper [Thin]
No longer produced · last seen 2013
× 2
-
Plate Special 1 × 4 with Angled Tubes
No longer produced · last seen 2019
× 2
-
Window 1 × 4 × 2 Plane, Hollow Studs, Single Hole Top and Bottom for Glass
× 2
-
Wheel Arch, Mudguard, 1 1/2 × 6 × 1 [Arch Extended]
× 2
-
Brick Sloped 30° 1 × 2 × 2/3
× 2
-
Plate 2 × 14
× 2
-
Tile 1 × 4 with Groove
× 1
-
Plate 2 × 12
× 1
-
Brick 2 × 4
× 1
-
Plate 2 × 2
× 1
-
Plate 4 × 12
× 1
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (14)
These extra parts come with the set in case one gets lost.
-
Tile 1 × 1 with Groove
× 2
-
Headwear Accessory Visor For Standard Helmet
No longer produced · last seen 2023
× 1
-
Technic Pin with Friction Ridges Lengthwise and Center Slots
No longer produced · last seen 2021
× 1
-
Headwear Accessory Ear Protectors / Headphones
No longer produced · last seen 2014
× 1
-
Lever Small Base with Black Lever
× 1
-
Headwear Accessory Visor / Diver's Mask
× 1
-
Tile 1 × 1 with Groove
× 1
-
Tile 1 × 1 with Groove
× 1
-
Technic Pin without Friction Ridges Lengthwise
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 1
-
Tyre 14 × 4 Smooth Small Single [New Style]
× 1
-
Bar 6L with Stop Ring
× 1
Minifigures 4
Description
A helicopter with a boat in tow
The build centres on a rescue helicopter, backed up by a small boat and gear for a sea rescue scenario. At 230 pieces the build stays approachable, yet there is enough going on that the rotor, skids, cargo area and hull read as a coordinated rescue team rather than separate toys bolted together. For collectors stacking compact City sets alongside bigger builds, this is a comfortable size: substantial enough for a shelf, small enough not to dominate it, and quick enough to finish in an evening.
White, black and two greys
White, black, dark bluish grey and light bluish grey give the model an unmistakable rescue-service look straight out of the box. With 108 unique parts, there is real variety in the build without the colour scheme tipping into anything bright or busy, which keeps it consistent with other vehicles from the Coast Guard sub-theme. Anyone hunting for particular grey or white body panels for their own creations can check the exact breakdown by colour and quantity in the full parts list on this page.
Four minifigures, one scenario
Four minifigures make it clear this set is built for play rather than shelf display alone: room for a crew in the helicopter and at least one figure for the boat or the rescue itself. That is what separates the Coast Guard Helicopter from purely static models – there is a small story to act out here, from the call-out to the flight to the rescue on the water. For anyone who actually plays with City sets rather than only collecting them, that is a clear plus.
Parts worth keeping for later
108 unique parts against 230 pieces overall means a fair number of duplicates, which is useful for anyone after spares or raw material for their own builds. Rotor blades, skids and the typical rescue-vehicle parts found here slot easily into other models, from a home-built airport to a harbour scene. The full parts list on this page breaks down every piece by colour and quantity, so it takes seconds to check whether this set holds the exact bricks a project needs.
FAQ
- How many pieces does the Coast Guard Helicopter 60013 have?
- The set contains 230 pieces, 108 of them unique.
- How many minifigures come with the set?
- Four minifigures are included, enough for a small sea-rescue scene with crew both in the air and on the water.
- When was this set released?
- It came out in 2013 as part of the LEGO® City Coast Guard sub-theme.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



