
Rover Testing Drive
Rover Testing Drive belongs to LEGO® City's Mars Exploration line, and true to its name, it centres on putting a Mars rover through a test run. At 202 pieces with 2 minifigures, this 2019 set strikes a fair balance between vehicle and crew. White, black, light grey and dark grey give it the clean, technical look shared across the whole range.
- Set number
- 60225
- Year
- 2019
- Pieces
- 202
- Minifigures
- 2
- Theme
- Mars Exploration
- Different parts
- 90
Parts list 90
-
Technic Pin 3/4
× 12
-
Technic Pin without Friction Ridges Lengthwise
× 7
-
Technic Pin Connector Round [Slotted]
× 7
-
Technic Wedge Belt Wheel [aka Pulley]
× 6
-
Wheel Hard Plastic, Treaded with 7 Pin Holes (37mm D. x 22mm)
No longer produced · last seen 2022
× 6
-
Brick Sloped Inverted 45° 6 × 2 Double with 2 × 4 Recessed
× 6
-
Tile Special 1 × 2 Grille with Bottom Groove
× 6
-
Wedge Plate 2 × 2 Cut Corner
× 6
-
Technic Axle and Pin Connector Angled #1
× 6
-
Technic Axle 2 Notched
× 5
-
Brick Sloped 45° 2 × 1 with 2/3 Inverted Cutout and no stud
× 4
-
Brick Sloped 45° 2 × 1 with Bottom Pin
× 4
-
Technic Pin with Friction Ridges Lengthwise and Center Slots
No longer produced · last seen 2021
× 3
-
Plate 1 × 2
× 3
-
Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]
No longer produced · last seen 2021
× 3
-
Plate Special 2 × 4 with Pins
No longer produced · last seen 2021
× 3
-
Technic Axle Pin with Friction Ridges Lengthwise
× 3
-
Technic Axle Connector Smooth [with x Hole + Orientation]
× 3
-
Brick 1 × 1
× 2
-
Brick 1 × 4
× 2
-
Plate 2 × 4
× 2
-
Plate 2 × 3
× 2
-
Plate 2 × 2
× 2
-
Plate 2 × 2
× 2
-
Plate 1 × 2
× 2
-
Plate Special 3 × 2 with Rounded End, Hole
× 2
-
Tile 1 × 8 with Groove
× 2
-
Plate Round 1 × 1 with Solid Stud
× 2
-
Plate Special 1 × 6 with Train Wagon End Fence
No longer produced · last seen 2024
× 2
-
Brick Curved 2 × 1 No Studs [1/2 Bow]
× 2
-
Tile 2 × 2 Corner
× 2
-
Tile Special 1 × 1 with Clip with Rounded Edges
× 2
-
Tile Special 2 × 2 Corner with Cut Corner - Facet
× 2
-
Tile Special 2 × 3 with 2 Clips [Thick Open O Clips]
No longer produced · last seen 2020
× 2
-
Brick Special 1 × 4 with 4 Studs on One Side
× 2
-
Tile 1 × 1 with Groove
× 2
-
Technic Brick 1 × 14 [13 Pin Holes]
× 2
-
Panel 1 × 2 × 1 [Rounded Corners]
× 2
-
Geode / Rock with Glitter Trans-Dark Pink Crystal
No longer produced · last seen 2024
× 2
-
Grab Claw with Axle
No longer produced · last seen 2019
× 2
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 2
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 2
-
Brick Special 1 × 1 with Stud on 1 Side
× 2
-
Plate Special 2 × 2 with Groove and Center Stud (Jumper)
× 2
-
Tile Special 1 × 2 with Sloped Walls AKA Money / Gold Bar [Ingot]
× 2
-
Tile 1 × 4 with Groove
× 1
-
Brick Special 1 × 2 with Grille
× 1
-
Brick 2 × 3
× 1
-
Brick 2 × 2
× 1
-
Brick 2 × 2
× 1
-
Plate 2 × 4
× 1
-
Plate 2 × 2
× 1
-
Plate 2 × 2
× 1
-
Plate 4 × 6
× 1
-
Plate 4 × 8
× 1
-
Plate 1 × 4
× 1
-
Plate 2 × 6
× 1
-
Plate Special 1 × 2 with Ladder
× 1
-
Box 2 × 2 × 2 Door with Slot
× 1
-
Equipment Camera with Side Sight [aka Space Gun]
× 1
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (13)
These extra parts come with the set in case one gets lost.
-
Technic Pin with Friction Ridges Lengthwise and Center Slots
No longer produced · last seen 2021
× 1
-
Tile Special Round 1 × 1 with Hollow Bar
× 1
-
Tile 1 × 1 with Groove
× 1
-
Tile 1 × 1 with Groove
No longer produced · last seen 2024
× 1
-
Technic Pin 3/4
× 1
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced
× 1
-
Technic Pin without Friction Ridges Lengthwise
× 1
-
Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip]
No longer produced · last seen 2024
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 1
Minifigures 2
Description
A rover on the test track
The set's name spells out its play pattern: a rover gets tested on simulated Mars terrain before it heads out on bigger missions. At 202 pieces, the vehicle stays compact enough to build quickly while still packing in recognisable detail such as wheels, sensors and a moving structure. For a set this size, that is a solid balance between build time and finished result. Details such as visible cabling and a small instrument mount reinforce the sense that this is technical equipment being trialled, not just a toy vehicle.
90 unique parts within 202
Of the 202 pieces, 90 are unique parts, an above-average ratio that points to genuine detail rather than repeated bricks. White, black, light grey and dark grey form the signature colour scheme of the Mars Exploration line, so the rover fits visually alongside other sets from the same wave. The full parts list on this page breaks down every piece individually. The moving wheel suspension and small sensor elements in particular help the rover hold up to close inspection.
Two minifigures on the test team
With two minifigures, the set is clearly built around a small test crew rather than a full base staff. That fits the concept: instead of a large station, the focus sits on one specific moment, a vehicle being tested under observation. It gives a solid starting point for role play around engineering checks and research, and pairs naturally with larger Mars Exploration sets. The two figures are also easy to swap out, so the test crew can be reassigned depending on how the scene is being played.
A natural fit with the rest of the range
Because Rover Testing Drive shares its release year with other Mars Exploration sets, it slots in easily alongside them in both colour and theme. Owners of larger stations or additional vehicles from the line can use this set to add a further rover and test team. On its own, it also works as a compact way into the wider Mars mission theme. It also works as a self-contained small build for a quiet afternoon.
FAQ
- What is the play pattern behind Rover Testing Drive?
- A two-person crew puts a Mars rover through a test run, built across 202 pieces with plenty of technical detail.
- How many minifigures come with the set?
- Two minifigures, acting as the rover's test team.
- Does it match other Mars Exploration sets?
- Yes — its colours and 2019 release date line up with the rest of that range.



