
LEGO® Gasgano's Podracer
This 150-piece set recreates the podracer flown by Gasgano, one of the competitors in the famous Tatooine podrace from Star Wars: Episode I. No minifigure is included, so the build is entirely about the vehicle's unusual shape. Dark bluish grey, green, black and orange echo the racer's distinctive paint scheme.
- Set number
- 6556842
- Year
- 2024
- Pieces
- 150
- Minifigures
- 0
- Theme
- Star Wars
- Different parts
- 48
Parts list 48
-
Brick Curved 2 × 1 No Studs [1/2 Bow] × 9![Brick Curved 2 × 1 No Studs [1/2 Bow] Green](/media/parts/11477/2/brick-curved-2-x-1-no-studs-12-bow-green.jpg)
-
Plate 2 × 2 Corner × 8
-
Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] × 8![Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] Dark Bluish Gray](/media/parts/3484/72/bar-1l-with-clip-cut-edges-and-one-side-hole-full-clip-dark-bluish-gray.jpg)
-
Brick Curved 2 × 1 No Studs [1/2 Bow] × 8![Brick Curved 2 × 1 No Studs [1/2 Bow] Orange](/media/parts/11477/25/brick-curved-2-x-1-no-studs-12-bow-orange.jpg)
-
Tile 2 × 2 Curved, Macaroni × 8
-
Plate Round 1 × 1 with Open Stud × 8
-
Technic Pin 1/2 with Friction × 8
-
Tile 1 × 6 with Groove × 6
-
Equipment Telescope / Torch / Spyglass, Support Round 1 × 1 × 1 2/3 × 6
-
Plate 2 × 4 × 4
-
Plate 1 × 1 × 4
-
Plate 1 × 4 × 4
-
Brick Curved 2 × 2 × 2/3 × 4
-
Tile 1 × 2 with Groove × 4
-
Brick Round 4 × 4 with 4 Side Pin Holes and Center Axle Hole × 4
-
Brick Wedged, Curved 2 × 1 with Stud Notch Right × 4
-
Brick Wedged, Curved 2 × 1 with Stud Notch Left × 4
-
Bracket 1 × 2 - 1 × 2 Inverted × 4
-
Wedge Plate 2 × 2 Cut Corner × 3
-
Brick 2 × 6 × 2
-
Technic Axle 6 × 2
-
Plate Special Round 2 × 2 with Center Stud (Jumper Plate) × 2
-
Brick Curved Inverted 2 × 1 × 2
-
Plate Special 1 × 1 Rounded with Handle × 2
-
Plate Special Round 1 × 1 with Hollow Stud and Horizontal Bar 1L × 2
-
Cone 2 × 2 × 2, Open Stud × 2
-
Plate Round 2 × 2 with Axle Hole Type 1 (+ Opening) × 2
-
Plate Round 2 × 2 with Axle Hole Type 1 (+ Opening) × 2
-
Technic Gear 28 Tooth Double Bevel × 2
-
Plate Round 4 × 4 with Pin Hole × 2
-
Bar 6L with Stop Ring × 2
-
Tile Round 1 × 1 × 2
-
Brick 2 × 10 × 1
-
Plate 4 × 12 × 1
-
Plate 6 × 14 × 1
-
Brick Special 1 × 1 Studs on 4 Sides × 1
-
Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle × 1
-
Tile Special Round 2 × 2 with Hole × 1
-
Technic Pin Connector Round 1L [Beam] × 1![Technic Pin Connector Round 1L [Beam] Tan](/media/parts/18654/19/technic-pin-connector-round-1l-beam-tan.jpg)
-
Tile Special Round 1 × 1 with Hollow Bar × 1
-
Brick 2 × 10 with 'Gasgano's Podracer' No longer produced · last seen 2024 × 1
-
Bar 4L (Lightsaber Blade / Wand) × 1
-
Tile 1 × 1 with Groove × 1
-
Wedge Plate 3 × 2 Left × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
-
Plate Special 1 × 3 Rounded with 3 Open Studs × 1
-
Sports Ice Skate × 1
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Description
A racer from the Boonta Eve podrace
Gasgano is one of the competitors from the famous podrace sequence in Star Wars: Episode I – The Phantom Menace, known in the film for an aggressive racing style and an unusually shaped craft. At 150 pieces, the set captures the racer's signature look, with two widely spaced engine pods connected to a narrow cockpit. It makes a neat addition for anyone collecting vehicles from that racing sequence, sitting comfortably alongside other podracers. The 48 unique parts give the build enough detail without stretching the assembly time out too far.
A paint scheme built from green, black and orange
The part selection of dark bluish grey, green, black and orange mirrors the racer's paint job from the film, making the finished model easy to recognise at a glance. The contrast between the dark hull and the orange accents keeps the small vehicle visible even from a distance on a shelf. With 48 unique elements, the set covers everything from the cockpit to the long engine arms and smaller greebled details. Builders after parts in this specific colour combination will find them listed on this page's parts list.
A vehicle-only build with no minifigure
No minifigure comes with this set, which is fairly common for smaller podracer builds that put the focus squarely on the vehicle itself. Owners of a suitable figure can add one separately, while the model also works fine as a stand-alone display piece on its own. At 150 pieces the build stays manageable, making it a reasonable option for a shorter building session. The long, asymmetric shape of the podracer also makes it one of the more visually unusual vehicles in the Star Wars line-up.
Where it sits in the Star Wars range
At 150 pieces, Gasgano's Podracer counts among the smaller vehicle sets in the Star Wars range, making it an accessible entry point in both price and build time. Compact models like this are often picked up as an addition to a larger podrace diorama. The full parts list on this page breaks down exactly which colours and shapes are included, which is handy when hunting for specific spare parts. That makes it easy to judge whether the set fits into an existing collection.
FAQ
- Does this set include a minifigure?
- No, the set consists only of the podracer vehicle; no minifigure is included.
- Which film does Gasgano appear in?
- The character appears in the podrace sequence from Star Wars: Episode I – The Phantom Menace.
- How many pieces does the set have?
- The model has 150 pieces, including 48 unique parts in dark bluish grey, green, black and orange.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



