
Spinlyn's Cavern
Spinlyn's Cavern brings the lair of the Spider Tribe leader Spinlyn from Legends of Chima to the building table. The set runs to 407 pieces across 167 distinct part types, with 3 minifigures included. A dark palette of dark bluish grey, black, light bluish grey and lime gives the cave its unsettling, spider-den atmosphere.
- Set number
- 70133
- Year
- 2014
- Pieces
- 407
- Minifigures
- 3
- Theme
- Legends of Chima
- Different parts
- 167
Parts list 167
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small
× 16
-
Brick Round 1 × 1 Open Stud
× 9
-
Plate Round 1 × 1 with Solid Stud
× 9
-
Brick Sloped 45° 2 × 1 with Bottom Pin
× 8
-
Technic Pin with Friction Ridges Lengthwise and Center Slots
No longer produced · last seen 2021
× 7
-
Technic Brick 1 × 2 [1 Pin Hole]
× 7
-
Cone 1 × 1 [Top Groove]
× 7
-
Rock 1 × 1 Jewel / Gem 24 Facet
× 6
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced
× 5
-
Tile Round 2 × 2 with Bottom Cross
No longer produced · last seen 2014
× 5
-
Technic Axle 2 Notched
× 5
-
Bracket 1 × 2 - 2 × 2
× 5
-
Tile 2 × 4 with Groove
× 5
-
Plate 2 × 2 Corner
× 4
-
Brick 1 × 2
× 4
-
Technic Brick 1 × 4 [3 Pin Holes]
× 4
-
Technic Pin 1/2 without Friction Ridges
× 4
-
Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip]
No longer produced · last seen 2023
× 4
-
Plate Round 1 × 1 with Solid Stud
× 4
-
Technic Brick 1 × 1 with Pin Hole
× 4
-
Brick Sloped 45° 2 × 1 with 2/3 Cutout [New Version]
× 4
-
Wedge Plate 2 × 4
× 4
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 4
-
Brick Sloped 65° 2 × 1 × 2
× 4
-
Plate Special 1 × 1 with Clip Vertical [Thick Open O Clip]
× 4
-
Tile Round 1 × 1
× 4
-
Bracket 1 × 2 - 2 × 2 Inverted
× 4
-
Bracket 1 × 2 - 1 × 4 [Square Corners]
No longer produced · last seen 2014
× 3
-
Plate 1 × 2
× 3
-
Technic Pin without Friction Ridges Lengthwise
× 3
-
Plate Special 2 × 2 with 1 Pin Hole [Complete Underside Rib]
× 3
-
Insect, Spider
No longer produced · last seen 2018
× 3
-
Technic Axle and Pin Connector Angled #1
× 3
-
Technic Axle Pin with Friction Ridges Lengthwise
× 3
-
Technic Pin 1/2 with 2L Bar Extension
× 3
-
Large Figure Tail / Horn
No longer produced · last seen 2016
× 3
-
Wedge Plate 3 × 6 Cut Corners
× 2
-
Brick 2 × 6
× 2
-
Antenna 8H Whip
× 2
-
Plate 2 × 4
× 2
-
Plate 2 × 4
× 2
-
Plate 2 × 2
× 2
-
Plate 4 × 8
× 2
-
Brick 1 × 3
× 2
-
Plate 1 × 3
× 2
-
Plate 1 × 6
× 2
-
Plate 1 × 6
× 2
-
Brick Sloped 75° 2 × 2 × 3 Double Convex
× 2
-
Brick Sloped 33° 3 × 1
× 2
-
Plate Round 1 × 1 with Solid Stud
× 2
-
Plate Round 1 × 1 with Solid Stud
× 2
-
Brick Special 2 × 2 with Pin and Axle Hole
No longer produced · last seen 2024
× 2
-
Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle)
× 2
-
Tile 1 × 6 with Groove
No longer produced · last seen 2024
× 2
-
Technic Axle and Pin Connector Angled Triple [120° Offset]
× 2
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Large
× 2
-
Bar Holder with Clip
× 2
-
Brick Curved 2 × 1 No Studs [1/2 Bow]
× 2
-
Brick Curved 2 × 1 No Studs [1/2 Bow]
× 2
-
Technic Beam 1 × 5 Thin with Axle Holes on Ends
× 2
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (18)
These extra parts come with the set in case one gets lost.
-
Technic Pin with Friction Ridges Lengthwise and Center Slots
No longer produced · last seen 2021
× 2
-
Technic Pin without Friction Ridges Lengthwise
× 2
-
Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip]
No longer produced · last seen 2023
× 2
-
Plate Round 1 × 1 with Solid Stud
× 2
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small
× 2
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 2
-
Tile Round 1 × 1
× 2
-
Tile Round 1 × 1
× 2
-
Antenna 8H Whip
× 1
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced
× 1
-
Technic Bush
× 1
-
Technic Pin 1/2 without Friction Ridges
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small
× 1
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium
No longer produced · last seen 2015
× 1
-
Weapon Sai
× 1
Minifigures 3
Description
A cave built for the Spider Tribe
Rather than a vehicle or a straightforward building, the set centres on a cavern structure inspired by Spinlyn's territory in the Chima storyline, suited to diorama-style display and roleplay scenes alike. At 407 pieces it sits in the mid-range for Chima sets from this year, offering enough building time for a proper afternoon session rather than a quick half-hour build. The construction leans on overhanging rock formations that give the model real depth on a shelf, rather than reading as a flat front-facing scene.
A dark palette with sharp accents
Dark bluish grey and black form the structural core of the cave, with light bluish grey used for rock and texture detailing throughout. Lime works as the fourth colour, picked out deliberately for webbing, crystals or other poison-toned accents that suit the spider theme. That combination of dark base tones with a single strong accent colour is typical of the villain-aligned sets in the Chima range, setting Spinlyn's Cavern clearly apart from the brighter Lion or Eagle Tribe sets in the same line. Collectors building out both sides of the story can use that contrast deliberately, pairing the dark cave against lighter allied sets on the same shelf.
167 shapes across 407 pieces
With 167 distinct part types spread across 407 pieces in total, the set offers solid variety without becoming overwhelming. Some shapes repeat for the cave walls and load-bearing structure, while more individual elements cover web detailing, crystals and moving parts. The full parts list on this page also highlights shapes worth reusing for other fantasy or cavern-style builds in different colours.
Three minifigures from the Chima story
The 3 included minifigures fit the storyline around Spinlyn's cave, supporting small confrontation scenes between the Spider Tribe and its rivals. For fans of the series, that makes the set interesting both as a standalone diorama and as an addition to larger Chima sets, giving the cave a role as a counterpoint to the vehicles and fortresses built by other tribes.
FAQ
- How many pieces does Spinlyn's Cavern have?
- The set includes 407 pieces across 167 distinct part types.
- Which minifigures come with the set?
- It includes 3 minifigures, matching the storyline around the Spider Tribe and its rivals.
- What colours define the set?
- Dark bluish grey and black form the base, light bluish grey adds texture, and lime provides accents for webbing and crystals.



