
Sir Fangar's Sabre-Tooth Walker
Sir Fangar's Sabre-Tooth Walker brings the ice-tribe leader of LEGO®'s Legends of Chima theme into a walking, animal-shaped vehicle build. Set 70143 from 2014 combines 415 pieces and 3 minifigures around a sabre-toothed tiger machine. The full parts list further down this page covers all 131 unique elements.
- Set number
- 70143
- Year
- 2014
- Pieces
- 415
- Minifigures
- 3
- Theme
- Legends of Chima
- Different parts
- 131
Parts list 131
-
Plate Round 1 × 1 with Solid Stud
× 12
-
Plate 1 × 6
× 11
-
Large Figure Weapon Claw, with Clip
No longer produced · last seen 2015
× 11
-
Wedge Plate 3 × 3 Cut Corner
No longer produced · last seen 2015
× 8
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced
× 8
-
Plate Round 2 × 2 with Axle Hole Type 1 (+ Opening)
× 8
-
Technic Axle Pin with Friction Ridges Lengthwise
× 8
-
Bracket 1 × 2 - 2 × 2
× 8
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small
× 8
-
Plate Special 1 × 1 with Clip Vertical [Thick Open O Clip]
× 8
-
Bracket 1 × 2 - 2 × 2 Inverted
× 8
-
Plate 2 × 4
× 7
-
Technic Axle 3
× 7
-
Rock 1 × 1 Jewel / Gem 24 Facet
× 7
-
Technic Axle 2 Notched
× 7
-
Plate 2 × 2 Corner
× 6
-
Plate 1 × 2
× 6
-
Plate 1 × 4
No longer produced · last seen 2024
× 6
-
Creature Body Part, Barb Large (Claw, Talon) with Clip
No longer produced · last seen 2019
× 6
-
Brick Curved 6 × 1
No longer produced · last seen 2023
× 6
-
Plate 2 × 2
× 5
-
Technic Pin 1/2 without Friction Ridges
× 5
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Large
× 5
-
Plate Round 2 × 2 with Rounded Bottom [Boat Stud]
× 4
-
Plate 1 × 2
× 4
-
Plate 2 × 6
× 4
-
Brick Curved Inverted 4 × 1
No longer produced · last seen 2017
× 4
-
Large Figure Foot, with Ball Socket 5 × 6 × 2
No longer produced · last seen 2019
× 4
-
Brick Curved 2 × 2 with Lip, No Studs
No longer produced · last seen 2021
× 4
-
Technic Axle Connector with Axle Hole
No longer produced · last seen 2021
× 4
-
Technic Beam 1 × 7 Bent (4 - 4) Thick
No longer produced · last seen 2015
× 4
-
Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction
× 4
-
Brick Wedged, Curved 2 × 3 × 2/3 Two Studs, Wing End
× 4
-
Technic Brick Special 2 × 2 with Pin Hole, Rotation Joint Socket
No longer produced · last seen 2017
× 4
-
Technic Brick Special 2 × 2 with Pin Hole, Rotation Joint Ball Half [Horizontal Top]
× 4
-
Technic Beam 1 × 2 with Ball Joint Angled
× 4
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small
× 4
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 4
-
Technic Pin 1/2 with 2L Bar Extension
× 4
-
Plate Special 2 × 2 × 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud]
No longer produced · last seen 2023
× 4
-
Plate Special 1 × 2 Side Handle [Free Ends]
× 3
-
Technic Pin with Friction Ridges Lengthwise and Center Slots
No longer produced · last seen 2021
× 3
-
Brick 2 × 4
× 3
-
Plate 1 × 2
× 3
-
Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots
No longer produced · last seen 2021
× 3
-
Wheel 18 × 8 with Fake Bolts and Deep Spokes with Inner Ring
× 3
-
Brick Special 1 × 4 with 4 Studs on One Side
× 3
-
Technic Brick 1 × 2 [2 Pin Holes]
× 3
-
Wedge Plate 3 × 2 Right
× 3
-
Wedge Plate 3 × 2 Left
× 3
-
Tyre Offset Tread with Center Band 23 × 7
× 3
-
Wedge Plate 3 × 3 Cut Corner
× 2
-
Plate 1 × 1
× 2
-
Technic Pin without Friction Ridges Lengthwise
× 2
-
Technic Brick 1 × 4 [3 Pin Holes]
× 2
-
Technic Brick 1 × 16 [15 Pin Holes]
× 2
-
Technic Bush
× 2
-
Hinge Brick 1 × 2 Base
× 2
-
Dish 8 × 8 Inverted [Radar], Solid Studs, Rounded Anti-stud Underside
No longer produced · last seen 2015
× 2
-
Brick Special 1 × 1 Studs on 4 Sides
× 2
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (17)
These extra parts come with the set in case one gets lost.
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced
× 3
-
Plate Round 1 × 1 with Solid Stud
× 3
-
Technic Pin with Friction Ridges Lengthwise and Center Slots
No longer produced · last seen 2021
× 2
-
Technic Pin 1/2 without Friction Ridges
× 2
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small
× 2
-
Plate 1 × 1
× 1
-
Technic Pin without Friction Ridges Lengthwise
× 1
-
Technic Bush
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small
× 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 1
-
Weapon Lightsaber Hilt with Bottom Ring
× 1
-
Weapon Lightsaber Hilt with Bottom Ring
× 1
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium
× 1
-
Tile Round 1 × 1
× 1
-
Tile Round 1 × 1 with Flame Print
No longer produced · last seen 2015
× 1
Minifigures 3
-
Sir Fangar
× 1
-
Stealthor
× 1
-
Gorzan
× 1
Description
Ice and shadow in one build
The colour scheme is built around contrast: black and light bluish grey form the mechanical body and armour plating, while trans-light blue stands in for ice shards and frosty detailing, and dark orange breaks up the cold palette with warmer accent pieces, likely on weapons or trim. At 415 pieces the set is a mid-size Chima release for 2014, substantial enough to give the walker a real four-legged stance and posable joints without turning into an oversized build.
131 unique parts
131 of the 415 pieces are unique, a moderate ratio that suggests a mix of standard structural bricks for the walker's frame and a smaller set of specialised parts for the animal-style detailing, such as claws, fangs or the transparent ice elements. That combination makes the set a useful source of both trans-light blue pieces, which are relatively uncommon, and dark bluish grey structural parts. The parts list above lists every one of the 131 elements individually.
Three minifigures for the Ice Hunters side
With 3 minifigures, the set supports a small Ice Hunters scene rather than a full tribal battle, in line with most animal-walker sets from the 2014 Chima wave, which paired one large build with a couple of characters. If you're collecting across the different Chima tribes, this set adds Ice Hunter-affiliated figures and colours distinct from the fire, jungle or other elemental tribes in the theme, which keeps a mixed shelf easy to tell apart.
A theme built on animal tribes
Legends of Chima ran through 2013 to 2015 and centred on rival animal tribes fighting over a magical energy source, with the sabre-toothed tiger Ice Hunters as one of the more antagonistic factions. Because much of the build relies on generic Technic-style connectors and panels rather than heavily tribe-specific prints, many parts remain useful outside Chima builds too. Compare the piece count, colours and part variety above with other Chima sets you own to see how this walker fits in.
FAQ
- How many pieces and minifigures does 70143 have?
- Sir Fangar's Sabre-Tooth Walker has 415 pieces made from 131 unique parts, plus 3 minifigures.
- Which Chima tribe does Sir Fangar lead?
- Sir Fangar leads the Ice Hunters, the sabre-toothed tiger tribe in LEGO's Legends of Chima story, which explains the trans-light blue ice detailing.
- Is this a large or mid-size Chima set?
- At 415 pieces it counts as a mid-size set for the 2014 Chima range, big enough for a posable animal-shaped walker.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



