
LEGO® Flinx's Ultimate Phoenix
Flinx's Ultimate Phoenix is a 2015 Legends of Chima set with 172 pieces and 2 minifigures. It centres on a fiery bird in red and glowing orange.
- Set number
- 70221
- Year
- 2015
- Pieces
- 172
- Minifigures
- 2
- Theme
- Legends of Chima
- Different parts
- 72
Parts list 72
-
Wave / Flame Rounded Double with Axle with Marbled Bright Light Orange Pattern No longer produced · last seen 2015 × 8
-
Cone 1 × 1 [Top Groove] × 8![Cone 1 × 1 [Top Groove] Trans-Orange](/media/parts/59900/182/cone-1-x-1-top-groove-trans-orange.jpg)
-
Plate Special 1 × 2 with Clip Horizontal on End × 8
-
Plate Special 1 × 2 Side Handle [Free Ends] × 6![Plate Special 1 × 2 Side Handle [Free Ends] Red](/media/parts/2540/4/plate-special-1-x-2-side-handle-free-ends-red.jpg)
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium No longer produced · last seen 2015 × 6
-
Plate Round 2 × 2 with Rounded Bottom [Boat Stud] × 4![Plate Round 2 × 2 with Rounded Bottom [Boat Stud] Trans-Orange](/media/parts/2654/182/plate-round-2-x-2-with-rounded-bottom-boat-stud-trans-orange.jpg)
-
Wedge Plate 4 Stud 45° Angle Plate × 4
-
Brick Round 1 × 1 Open Stud × 4
-
Plate 1 × 4 × 4
-
Plate Special 1 × 2 with Handle on End [Closed Ends] × 4![Plate Special 1 × 2 with Handle on End [Closed Ends] Black](/media/parts/60478/0/plate-special-1-x-2-with-handle-on-end-closed-ends-black.jpg)
-
Arm Mechanical with Clip [Thick Support] × 4![Arm Mechanical with Clip [Thick Support] Pearl Gold](/media/parts/98313/297/arm-mechanical-with-clip-thick-support-pearl-gold.jpg)
-
Plate 1 × 2 × 3
-
Brick Sloped 45° 2 × 1 with 2/3 Cutout [New Version] × 3![Brick Sloped 45° 2 × 1 with 2/3 Cutout [New Version] Red](/media/parts/15672/4/brick-sloped-45-2-x-1-with-23-cutout-new-version-red.jpg)
-
Wave / Flame Rounded Single with Pin No longer produced · last seen 2023 × 3
-
Plate 1 × 2 × 2
-
Plate 1 × 1 × 2
-
Plate 1 × 6 × 2
-
Brick Round 2 × 2 with Axle Hole × 2
-
Dish 2 × 2 Inverted [Radar] × 2![Dish 2 × 2 Inverted [Radar] Trans-Light Blue](/media/parts/4740/41/dish-2-x-2-inverted-radar-trans-light-blue.jpg)
-
Technic Brick 1 × 1 with Pin Hole × 2
-
Tile 1 × 6 with Groove × 2
-
Plate Special 1 × 2 with Pin Hole on Top × 2
-
Brick Curved 2 × 1 No Studs [1/2 Bow] × 2![Brick Curved 2 × 1 No Studs [1/2 Bow] Red](/media/parts/11477/4/brick-curved-2-x-1-no-studs-12-bow-red.jpg)
-
Large Figure Foot, with Ball Socket 3 × 5 × 2 No longer produced · last seen 2015 × 2
-
Technic Axle Connector with Axle Hole No longer produced · last seen 2021 × 2
-
Technic Axle and Pin Connector Angled #4 - 135° × 2
-
Technic Axle Pin with Friction Ridges Lengthwise × 2
-
Brick Wedged, Curved 4 × 4 No Top Studs No longer produced · last seen 2024 × 2
-
Plate Special 1 × 2 [Side Handle Closed Ends] × 2![Plate Special 1 × 2 [Side Handle Closed Ends] Black](/media/parts/48336/0/plate-special-1-x-2-side-handle-closed-ends-black.jpg)
-
Brick Curved 3 × 1 No Studs × 2
-
Technic Pin 1/2 with 2L Bar Extension × 2
-
Hinge Plate 1 × 4 Swivel Top / Base - Solid Clip [Complete Assembly] No longer produced · last seen 2024 × 2![Hinge Plate 1 × 4 Swivel Top / Base - Solid Clip [Complete Assembly] Black](/media/parts/73983/0/hinge-plate-1-x-4-swivel-top-base-solid-clip-complete-assembly-black.jpg)
-
Technic Axle 4 with Stop × 2
-
Large Figure Skeletal, Limb, 5L with Ball Joint on Axle and Ball Socket No longer produced · last seen 2018 × 2
-
Large Figure Limb Cover, Size 4, Armor with Ball Joint Socket No longer produced · last seen 2016 × 2
-
Plate Special 1 × 2, Top Clip [Split] No longer produced · last seen 2021 × 2![Plate Special 1 × 2, Top Clip [Split] Red](/media/parts/92280/4/plate-special-1-x-2-top-clip-split-red.jpg)
-
Brick Curved 4 × 1 Double, No Studs × 2
-
Brick Curved 4 × 1 Double, No Studs with Flames Print No longer produced · last seen 2015 × 2
-
Brick Round 2 × 2 Truncated Cone × 2
-
Brick 2 × 4 × 1
-
Plate 2 × 4 × 1
-
Plate 2 × 4 × 1
-
Plate 2 × 2 × 1
-
Plate 2 × 2 × 1
-
Plate 2 × 6 × 1
-
Bar Holder with Clip × 1
-
Rock 1 × 1 Crystal 4 Point × 1
-
Rock 1 × 1 Crystal 4 Point No longer produced · last seen 2015 × 1
-
Brick Curved 4 × 1 No Studs [Stud Holder with Symmetric Ridges] × 1![Brick Curved 4 × 1 No Studs [Stud Holder with Symmetric Ridges] Red](/media/parts/11153/4/brick-curved-4-x-1-no-studs-stud-holder-with-symmetric-ridges-red.jpg)
-
Bracket 5 × 2 × 1 1/3 with Holes, Pin Bottom No longer produced · last seen 2024 × 1
-
Plate Special 1 × 2 with Clip Horizontal on Side × 1
-
Plate Special 1 × 2 with 5.9mm Centre Side Towball × 1
-
Plate Special 1 × 2 5.9mm Centre Side Towball Socket × 1
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) × 1
-
Creature Body Part, Barb Large (Claw, Talon) with Clip No longer produced · last seen 2017 × 1
-
Technic Brick Special 2 × 2 with 10.2mm Balls with Holes and Axle Hole No longer produced · last seen 2023 × 1
-
Plate Special 1 × 2 with Handles on Ends × 1
-
Bracket 3 × 2 × 1 1/3 with Pin Bottom No longer produced · last seen 2021 × 1
-
Bar 4L (Lightsaber Blade / Wand) × 1
-
Bar 4L (Lightsaber Blade / Wand) × 1
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (5)
These extra parts come with the set in case one gets lost.
Minifigures 2
Description
A bird made of fire
The phoenix vehicles of the Chima world are hybrids of animal and machine, and this one takes the fire bird as its model. With 172 pieces you end up with wings, head and tail that are easy to pick up and hold. It is a set for a short building session that still gains a strong character from its 65 different part types, rather than looking like a rough sketch of a bird.
Warm red and glowing orange
Red forms the body, trans-orange provides the glow of the flame pieces, and black and light bluish grey add contrast. This colour combination is typical of the fire tribes in the Chima line and makes the model an eye-catcher on the shelf. For your own collection the trans-orange parts are especially interesting, since they suit lava, fire or lighting effects in scenes of your own without needing any extra stickers.
Two figures at the controls
Two minifigures come with the set and can sit on or beside the phoenix. That invites aerial battles and chases in which the bird swoops around the playroom. On display the model works beside other Chima sets, especially the vehicles of the fire tribes. If you are collecting the range, this is a member that does not need much space and still reads instantly as a phoenix, even from across the room. Placed next to the figures, it makes a small duel that stages nicely on a table.
Parts list and new models
The parts list on this page gives every colour and quantity, which helps when checking a second-hand set or sorting bricks. With the “What can I build?” tool you can see which other models can be assembled from these pieces and your stock, such as dragons, spaceships or flying machines. The red and orange elements also suit fire engines and other models, should you want to turn the set into new building ideas one day.
FAQ
- How many pieces and minifigures does it have?
- Flinx's Ultimate Phoenix has 172 pieces across 65 different part types and includes 2 minifigures. It was released in 2015 in Legends of Chima.
- Which colours dominate?
- Red, trans-orange, black and light bluish grey. The full split is in the parts list.
- Can the phoenix be rebuilt?
- Yes. The pieces are ordinary building elements. The “What can I build?” tool on this page offers rebuild ideas.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.






