
Jay's Elemental Dragon
Jay's Elemental Dragon is a 350-piece Ninjago set from 2016 built around Jay, the ninja of lightning. It comes with 2 minifigures and 134 unique parts, giving builders a poseable flying dragon rather than a static display model. Blue, black, white and dark grey run through the whole build, tying it to Jay's usual colour scheme.
- Set number
- 70602
- Year
- 2016
- Pieces
- 350
- Minifigures
- 2
- Theme
- Ninjago
- Different parts
- 134
Parts list 134
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 15
-
Plate Round 1 × 1 with Solid Stud
× 12
-
Plate 1 × 2
× 9
-
Bar Holder with Clip
× 9
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small
× 8
-
Technic Brick 1 × 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin
× 7
-
Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]
× 7
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
× 7
-
Plate 1 × 2
× 6
-
Brick Curved 2 × 1 No Studs [1/2 Bow]
× 6
-
Brick Wedged, Curved 2 × 3 × 2/3 Two Studs, Wing End
No longer produced · last seen 2021
× 5
-
Arm Mechanical with Clip [Thick Support]
× 5
-
Weapon Sword with Jagged Edges and Marbled White Pattern
No longer produced · last seen 2017
× 4
-
Wedge Plate 3 × 3 Cut Corner
× 4
-
Wedge Plate 3 × 3 Cut Corner
× 4
-
Brick 1 × 1
× 4
-
Plate 2 × 3
× 4
-
Plate 2 × 2
× 4
-
Brick Sloped 45° 2 × 2
× 4
-
Plate Special 1 × 2 5.9mm Centre Side Towball Socket
× 4
-
Large Figure Foot, with Ball Socket 3 × 5 × 2
No longer produced · last seen 2018
× 4
-
Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction
× 4
-
Brick Wedged, Curved 1 × 2 × 2/3 No Studs, Wing End
× 4
-
Technic Brick Special 2 × 2 with Pin Hole, Rotation Joint Ball Half [Horizontal Top]
No longer produced · last seen 2017
× 4
-
Plate Special 1 × 1 with Tooth
× 4
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 4
-
Technic Brick Special 2 × 2 with Ball and Axle Hole, with 6 Holes in Ball
× 4
-
Plate Round 1 × 1 with Solid Stud
× 4
-
Hinge Plate 1 × 2 Locking with 1 Finger On Top
× 4
-
Plate Special 1 × 2 with Handle on End [Closed Ends]
× 4
-
Plate Special 1 × 2 with Bar Up [Horizontal Arm 5mm]
× 4
-
Bracket 1 × 2 - 1 × 2 Inverted
× 4
-
Plate 1 × 4
× 3
-
Plate Special 1 × 2 with 5.9mm Towball Socket and Towball
× 3
-
Projectile, Spring Shooter Ammunition 8L Bar
No longer produced · last seen 2023
× 3
-
Tile Special 1 × 1 with Clip with Rounded Edges
× 3
-
Technic Axle 2 Notched
× 3
-
Plate 2 × 2 Corner
× 2
-
Weapon Gun / Pistol Flintlock
No longer produced · last seen 2016
× 2
-
Plate 2 × 4
× 2
-
Plate 1 × 2
× 2
-
Plate 1 × 2
× 2
-
Plate 1 × 4
× 2
-
Plate 2 × 10
× 2
-
Brick Sloped 33° 3 × 1
× 2
-
Plate Round 1 × 1 with Solid Stud
× 2
-
Bracket 1 × 2 - 1 × 4 [Rounded Corners]
No longer produced · last seen 2019
× 2
-
Bar Holder with Clip
× 2
-
Brick Special 1 × 2 with 2 Studs on 1 Side
× 2
-
Plate Special 1 × 2 with Pin Hole on Top
× 2
-
Plate Round 4 × 4 with 2 × 2 Round Opening
No longer produced · last seen 2022
× 2
-
Plate Special 1 × 2 with 5.9mm Centre Side Towball
× 2
-
Tile Round 2 × 2 with Airjitzu Lightning Symbol Print
No longer produced · last seen 2016
× 2
-
Plate Special 1 × 1 with Vertical Tooth
× 2
-
Launcher, Brick Special 1 × 4 Spring Shooter with Light Bluish Gray Top
× 2
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
× 2
-
Wedge Plate 4 Stud 45° Angle Plate
× 2
-
Creature Body Part, Barb Large (Claw, Talon) with Clip
No longer produced · last seen 2019
× 2
-
Brick Curved 1 × 3 × 2 Inverted [Inside Bow]
× 2
-
Plate Special Round 2 × 2 with Center Stud (Jumper Plate)
× 2
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (18)
These extra parts come with the set in case one gets lost.
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 3
-
Weapon Gun / Pistol Flintlock
No longer produced · last seen 2016
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Animal Body Part, Horn (Cattle) / Tentacle / Vine / Branch / Tongue - Long
× 1
-
Launcher Trigger, Weapon Gun Trigger
× 1
-
Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard]
× 1
-
Arm Mechanical with 2 Clips [Battle Droid]
× 1
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small
× 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 1
-
Hose Rigid 3mm D. 3L / 2.4cm
No longer produced · last seen 2016
× 1
-
Equipment Medical Syringe
No longer produced · last seen 2020
× 1
-
Tile Round 1 × 1
× 1
-
Tile Round 1 × 1 with Ninjago Trapped Nya Print
No longer produced · last seen 2016
× 1
-
Weapon Sai
× 1
Minifigures 2
Description
A dragon built for lightning
Every ninja in the Ninjago world has an elemental dragon, and this one belongs to Jay, whose power is lightning. The head, wings and tail all articulate, so the model can be posed mid-flight or crouched ready to strike, matching the dragon scenes from the show. A saddle behind the neck seats a minifigure, and with a second figure included, the set is built for staging a quick duel rather than sitting still on a shelf.
A shorter build
At 350 pieces and 134 unique parts, this sits among the smaller Ninjago vehicle sets, and most builders finish it in a single sitting. Construction leans on small jointed sections for the wings, claws and tail rather than large flat panels, which is what gives the finished dragon its flexible, creature-like feel. Anyone who has built other Ninjago dragons will recognise several recurring hinge and claw techniques here, alongside a few connections used specifically for this pose.
Colours and parts
Dark grey and black make up most of the dragon's body, white picks out teeth, claws and small trim details, and blue marks Jay's armour and wing sections throughout. That consistent four-colour palette makes the model read clearly at a glance, and it also makes the parts on this page useful beyond this one set, since blue and grey pieces from a dragon like this often turn up in other builds. The full list below covers all 134 unique parts with their colours and quantities.
Who it suits
This set suits Ninjago fans who want a compact, posable vehicle rather than a long-term build, and it works well for younger builders taking on their first dragon set. The two minifigures make it playable on its own, without needing another set for a duel partner. It also fits neatly alongside other elemental dragons from the same wave for anyone collecting the full set of ninja mounts.
FAQ
- How many pieces and minifigures does set 70602 include?
- It has 350 pieces across 134 unique parts, plus 2 minifigures.
- Which ninja does this dragon belong to?
- The dragon belongs to Jay, the ninja of lightning, and is built in his usual blue, black and grey colours.
- Can the dragon be posed?
- Yes, the head, wings and tail all move, allowing different flying and attacking poses.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



