
Tiger Widow Island
Tiger Widow Island 70604 is a 2016 LEGO® Ninjago set built around a jungle island scene. It's made from 450 pieces across 209 unique part types and includes 5 minifigures, making it one of the more figure-heavy sets of its size. A giant creature sits at the centre of the build and gives the set its name.
- Set number
- 70604
- Year
- 2016
- Pieces
- 450
- Minifigures
- 5
- Theme
- Ninjago
- Different parts
- 209
Parts list 209
-
Brick 1 × 2
× 10
-
Plate 1 × 2
× 8
-
Weapon Spike Flexible 3.5L
× 8
-
Brick Special 1 × 2 with Grille
× 6
-
Plate Round 1 × 1 with Solid Stud
× 6
-
Plant, Leaves 6 × 5 Swordleaf with Clip [Thick Open O Clip]
× 6
-
Bar Holder with Clip
× 6
-
Brick Special 1 × 2 Palisade [aka Log]
× 6
-
Plant, Flower, Plate Round 1 × 1 with 4 Petals
No longer produced · last seen 2022
× 6
-
Plate Special 1 × 1 with Tooth
× 6
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium
No longer produced · last seen 2017
× 6
-
Tile 1 × 2 with Groove
× 5
-
Plate Special 1 × 4 Offset with Bar Holes
× 5
-
Plate Round 1 × 1 with Open Stud
× 5
-
Plate 2 × 2 Corner
× 4
-
Brick Sloped Inverted 75° 2 × 1 × 3
× 4
-
Wedge Plate 3 × 3 Cut Corner
× 4
-
Plate 2 × 4
× 4
-
Plate 1 × 2
× 4
-
Plate 1 × 3
× 4
-
Plate 1 × 3
× 4
-
Flag 2 × 2 Square, Flat Clip Edge [Thick Clips]
No longer produced · last seen 2021
× 4
-
Plate Special 1 × 2 with Clip Horizontal on Side
× 4
-
Plate Special 1 × 2 5.9mm Towball Socket
× 4
-
Plate Special 1 × 1 with Vertical Tooth
× 4
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
× 4
-
Brick Sloped 45° 2 × 1 with 2/3 Cutout [New Version]
× 4
-
Brick Sloped 45° 2 × 1 with 2/3 Cutout [New Version]
× 4
-
Wedge Plate 4 Stud 45° Angle Plate
× 4
-
Tile Special 1 × 1 with Clip with Rounded Edges
× 4
-
Minifig Head [Plain] [Hollow Stud]
No longer produced · last seen 2021
× 4
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
No longer produced · last seen 2020
× 4
-
Brick Sloped 18° 4 × 1
× 4
-
Arm Mechanical with Clip [Thick Support]
× 4
-
Plate Special 1 × 2 5.9mm Centre Side Towball Socket
× 3
-
Plate Special 1 × 2 with End Towball
× 3
-
Door Frame 1 × 4 × 6 Type 2
× 3
-
Plate Round 1 × 1 with Open Stud
× 3
-
Bracket 1 × 2 - 2 × 2 Inverted
× 3
-
Plant, Leaves 4 × 3
× 2
-
Plate 2 × 12
× 2
-
Plate Special 1 × 2 Side Handle [Free Ends]
× 2
-
Plate Special 1 × 2 Side Handle [Free Ends]
× 2
-
Weapon Gun / Pistol Flintlock
No longer produced · last seen 2016
× 2
-
Plate 1 × 1
× 2
-
Fence Lattice 1 × 4 × 1
× 2
-
Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]
No longer produced · last seen 2022
× 2
-
Plate 1 × 6
× 2
-
Brick Sloped Inverted 45° 2 × 2 Double Convex
× 2
-
Technic Plate 2 × 4 [3 Holes]
× 2
-
Technic Pin 1/2 without Friction Ridges
× 2
-
Equipment Weapon, Loudhailer / Speaker / Blaster / Space Gun
× 2
-
Plate Round 1 × 1 with Solid Stud
× 2
-
Technic Brick 1 × 1 with Pin Hole
× 2
-
Weapon Bladed Claw Spread
× 2
-
Animal / Creature Body Part, Wing Feathered
No longer produced · last seen 2016
× 2
-
Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle
× 2
-
Plate Special 1 × 2 with Pin Hole on Top
× 2
-
Brick Curved 2 × 1 No Studs [1/2 Bow]
× 2
-
Cone 1 × 1 Inverted with Bar at Bottom (Ice Cream Cone)
No longer produced · last seen 2016
× 2
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (37)
These extra parts come with the set in case one gets lost.
-
Plant, Flower, Plate Round 1 × 1 with 4 Petals
No longer produced · last seen 2022
× 3
-
Plate Round 1 × 1 with Open Stud
× 2
-
Equipment Whip [aka Plant Vine]
No longer produced · last seen 2017
× 1
-
Weapon Gun / Pistol Flintlock
No longer produced · last seen 2016
× 1
-
Technic Pin with Friction Ridges Lengthwise and Center Slots
No longer produced · last seen 2021
× 1
-
Plate 1 × 1
× 1
-
Technic Pin without Friction Ridges Lengthwise
× 1
-
Technic Pin 1/2 without Friction Ridges
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Plate Round 1 × 1 with Solid Stud
No longer produced · last seen 2023
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Leg Skeleton
× 1
-
Weapon Bladed Claw Spread
× 1
-
Weapon Sword with Jagged Edges and Marbled White Pattern
No longer produced · last seen 2020
× 1
-
Minifig Neckwear Moustache
No longer produced · last seen 2021
× 1
-
Weapon Harpoon [Smooth Shaft]
× 1
-
Technic Pin Connector Round 1L [Beam]
× 1
-
Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard]
× 1
-
Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard]
× 1
-
Weapon Sword / Cutlass Serrated with Skull Hand Guard
× 1
Minifigures 5
-
Sqiffy
× 1
-
Nya (Skybound)
× 1
-
Dogshank (Big Fig)
× 1
-
Cole Ghost with Head Wrap (Skybound)
× 1
-
Master Wu (Skybound)
× 1
Description
A scene set, not a vehicle set
Where a lot of Ninjago sets are built around a single vehicle or mech, Tiger Widow Island is structured as a small environment: a jungle island with hiding spots, climbing sections and a central threat in the shape of an oversized spider creature. That makes it better suited to acting out a scene with several characters at once than to speed or vehicle play. At 450 pieces, the build itself stays fairly compact, with most of the complexity coming from the number of separate elements rather than sheer piece count.
A high part count for its size
209 unique part types across 450 total pieces is a dense ratio for a set this size, pointing to a build made up of lots of small terrain and decoration elements rather than a few large moulded pieces. Black, dark grey, light grey and reddish brown combine into an earthy, natural palette suited to jungle and cave scenery, and it stands in deliberate contrast to the brighter outfits worn by the included minifigures.
Five minifigures for group scenes
With 5 minifigures included, Tiger Widow Island supports group scenes better than most sets in its size range, which fits how the Ninjago show itself tends to put several ninja and opponents on screen together. Fans following the series can use the set to recreate a jungle encounter directly, while newcomers still get a self-contained scene with a clear location and a single central threat to build the story around. The figures also combine well with other sets from the same Ninjago season if you want to expand the scene further.
Sorting the parts before you build
With 209 different part types in the box, it's easy to lose track of what belongs where. This page lists every one of the 450 pieces in Tiger Widow Island individually, including colours and shapes, so you can check the set before buying or track down a specific jungle or cave element if one goes missing partway through the build.
FAQ
- What is the Tiger Widow Island set about?
- It centres on an oversized spider creature within a small jungle island scene, built from 450 pieces.
- How many minifigures does it include?
- The set comes with 5 minifigures, making it one of the more figure-heavy Ninjago sets of its size.
- What colours make up the set?
- Black, dark grey, light grey and reddish brown form an earthy, natural palette suited to the jungle setting.



