
LEGO® Stormbringer
Stormbringer is a 2018 Ninjago set built around a blue-toned flying vehicle from the ninja's fleet. With 498 pieces and four minifigures, it sits just under the 500-piece mark but firmly within the typical range for mid-size Ninjago sets. Its 155 unique parts make for a varied build.
- Set number
- 70652
- Year
- 2018
- Pieces
- 498
- Minifigures
- 4
- Theme
- Ninjago
- Different parts
- 155
Parts list 155
-
Brick Curved 2 × 1 No Studs [1/2 Bow] × 20![Brick Curved 2 × 1 No Studs [1/2 Bow] Dark Blue](/media/parts/11477/272/brick-curved-2-x-1-no-studs-12-bow-dark-blue.jpg)
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) × 14
-
Plate 1 × 2 × 13
-
Bar Holder with Clip × 12
-
Plate Special 1 × 1 with Tooth × 10
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small × 10
-
Bracket 1 × 2 - 2 × 2 Inverted × 10
-
Plate 1 × 1 × 8
-
Brick Curved 2 × 1 No Studs [1/2 Bow] × 8![Brick Curved 2 × 1 No Studs [1/2 Bow] Blue](/media/parts/11477/1/brick-curved-2-x-1-no-studs-12-bow-blue.jpg)
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) × 8
-
Brick Sloped Inverted 34° 3 × 1 with Internal Stopper No longer produced · last seen 2018 × 8
-
Brick Wedged, Curved 2 × 3 × 2/3 Two Studs, Wing End No longer produced · last seen 2021 × 8
-
Plate 1 × 2 × 6
-
Bracket 1 × 2 - 1 × 4 [Rounded Corners] No longer produced · last seen 2019 × 6![Bracket 1 × 2 - 1 × 4 [Rounded Corners] Black](/media/parts/10201/0/bracket-1-x-2-1-x-4-rounded-corners-black.jpg)
-
Tile Special 2 × 3 Pentagonal × 6
-
Bracket 1 × 2 - 2 × 2 × 6
-
Plate Special 1 × 2 [Side Handle Closed Ends] × 6![Plate Special 1 × 2 [Side Handle Closed Ends] Blue](/media/parts/48336/1/plate-special-1-x-2-side-handle-closed-ends-blue.jpg)
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small No longer produced · last seen 2020 × 6
-
Bracket 1 × 2 - 1 × 2 Inverted × 6
-
Plate 2 × 4 × 5
-
Brick Curved 2 × 2 × 2/3 × 5
-
Technic Brick Special 2 × 2 with Ball and Axle Hole, with 6 Holes in Ball × 5
-
Weapon Lightsaber Hilt with Bottom Ring × 5
-
Wedge Plate 3 × 3 Cut Corner × 4
-
Plate 4 × 4 Corner × 4
-
Brick 1 × 2 × 4
-
Plate 1 × 2 × 4
-
Plate 1 × 3 × 4
-
Large Figure Foot, with Ball Socket 3 × 5 × 2 No longer produced · last seen 2018 × 4
-
Plant / Animal Body Part, Tree / Branch / Tail / Appendage Bladed with Pin No longer produced · last seen 2018 × 4
-
Plate Special 1 × 1 Rounded with Handle × 4
-
Tile 1 × 2 with Groove × 4
-
Tile 1 × 2 with Groove × 4
-
Tile 1 × 1 with Groove × 4
-
Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction × 4
-
Technic Brick Special 2 × 2 with Pin Hole, Rotation Joint Ball Half [Vertical Side] × 4![Technic Brick Special 2 × 2 with Pin Hole, Rotation Joint Ball Half [Vertical Side] Dark Bluish Gray](/media/parts/48171/72/technic-brick-special-2-x-2-with-pin-hole-rotation-joint-ball-half-vertical-side-dark-bluish-gray.jpg)
-
Wedge Plate 2 × 4 × 4
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 4
-
Plate Special 1 × 1 with Clip Vertical [Thick Open O Clip] × 4![Plate Special 1 × 1 with Clip Vertical [Thick Open O Clip] Black](/media/parts/60897/0/plate-special-1-x-1-with-clip-vertical-thick-open-o-clip-black.jpg)
-
Plate Special 1 × 1 with Clip Horizontal [Thick Open O Clip] × 4![Plate Special 1 × 1 with Clip Horizontal [Thick Open O Clip] Black](/media/parts/61252/0/plate-special-1-x-1-with-clip-horizontal-thick-open-o-clip-black.jpg)
-
Weapon Spike Flexible 3.5L × 4
-
Brick Special 1 × 1 with Stud on 1 Side × 4
-
Bracket 1 × 2 - 1 × 2 × 4
-
Plate 2 × 4 × 3
-
Plate 1 × 2 × 3
-
Bracket 5 × 2 × 1 1/3 with Holes, Pin Bottom × 3
-
Projectile, Spring Shooter Ammunition 8L Bar No longer produced · last seen 2023 × 3
-
Wedge Plate 3 × 2 Right × 3
-
Wedge Plate 3 × 2 Left × 3
-
Brick Sloped 30° 1 × 2 × 2/3 × 3
-
Plate 2 × 2 Corner × 2
-
Wedge Plate 3 × 3 Cut Corner × 2
-
Wedge Plate 3 × 3 Cut Corner × 2
-
Plate Special 1 × 2 Side Handle [Free Ends] × 2![Plate Special 1 × 2 Side Handle [Free Ends] Black](/media/parts/2540/0/plate-special-1-x-2-side-handle-free-ends-black.jpg)
-
Plate Special 1 × 2 Side Handle [Free Ends] No longer produced · last seen 2021 × 2![Plate Special 1 × 2 Side Handle [Free Ends] Dark Red](/media/parts/2540/320/plate-special-1-x-2-side-handle-free-ends-dark-red.jpg)
-
Technic Axle Towball × 2
-
Brick 2 × 3 × 2
-
Brick 1 × 1 × 2
-
Plate 2 × 4 × 2
-
Plate 2 × 4 × 2
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (23)
These extra parts come with the set in case one gets lost.
-
Plate 1 × 1 × 1
-
Minifig Neckwear Bandana (Ninjago) × 1
-
Weapon Harpoon [Smooth Shaft] × 1![Weapon Harpoon [Smooth Shaft] Flat Silver](/media/parts/18041/179/weapon-harpoon-smooth-shaft-flat-silver.jpg)
-
Tile Special Round 1 × 1 with Hollow Bar × 1
-
Tile Round 1 × 1 Half Circle × 1
-
Minifig Neckwear Ninja Face Scarf No longer produced · last seen 2018 × 1
-
Tile Round 1 × 1 Quarter × 1
-
Tile 1 × 1 with Groove × 1
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced × 1
-
Weapon Sword Curved Blade with Bar No longer produced · last seen 2020 × 1
-
Weapon Dagger / Knife with Flat Hilt End and Curved Blade, Cross Hatched Grip No longer produced · last seen 2020 × 1
-
Weapon Scythe / Hook with Bar No longer produced · last seen 2020 × 1
-
Weapon Scythe / Hook with Double Blades No longer produced · last seen 2020 × 1
-
Weapon Sword with Bar Marbled Flat Silver Pattern No longer produced · last seen 2018 × 1
-
Technic Pin 1/2 without Friction Ridges × 1
-
Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] No longer produced · last seen 2023 × 1![Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] Orange](/media/parts/48729b/25/bar-1l-with-clip-cut-edges-and-one-side-hole-gap-in-clip-orange.jpg)
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small × 1
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small × 1
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small No longer produced · last seen 2020 × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
Minifigures 4
Alternative models
Fan models by Rebrickable users that you can build (mostly) from this set’s parts. Instructions are available from the designers.
- 70652 Storm Dragon Mech
- Transforming Werewolf Mech - 70652 Alternate Build
- Jay's Thunderbird - LEGO Ninjago Stormbringer 70652 Alternate MOC
- Lightbringer Brain Cyclops
- Alien Gun
- jay's elemental lightning mech
- GUARDIAN ROBOT
Description
Four minifigures as the crew
Four minifigures come with the set, forming the crew of the flying vehicle, ready for missions within the ongoing Ninjago storyline that season of the show. That makes it easy to bring the model straight into play scenes alongside other Ninjago vehicles, whether that's a chase or an aerial battle drawn from the show's storylines, without needing figures borrowed from other sets to fill out the crew or complete the story.
A blue-toned flying vehicle
Blue, black, dark blue and dark bluish grey make up the colour scheme, clearly placing the model within the lightning-themed side of the ninja vehicle fleet, distinct from the other elemental colours used across the range such as red or green. Rather than a mixed palette, the set commits to a cohesive, moody blue look that suits its flying-vehicle design and stands apart from the earthier or fire-toned Ninjago sets built around other elements that same season of the story.
155 parts for a jointed build
With 155 unique parts, there's a solid share of specialised shapes, typical of a flying model with moving wings or cockpit sections that need more variety than a simple ground vehicle would. The full parts list on this page breaks down exactly which shapes and colours are used, with exact quantities for each one, handy for anyone hunting blue specialised pieces for their own vehicle builds or completing this particular set after losing a piece from the cockpit or the wings.
Size and build experience
At just under 500 pieces, the build sits in a manageable middle range, suited to a single evening's building session without stretching across several days or requiring prior experience with other sets in the range. That makes Stormbringer a solid addition to an existing Ninjago vehicle fleet, or a good standalone starting point for newcomers just beginning to collect this theme for the very first time in their lives.
FAQ
- How many pieces does Stormbringer have?
- Set 70652 has 498 pieces made up of 155 unique parts.
- How many minifigures are included?
- Four minifigures come with the set, forming the crew of the flying vehicle.
- What colours dominate the set?
- Blue, black and dark blue define the look, placing the model clearly within the Ninjago vehicle fleet.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



