
Kai's Blade Cycle & Zane's Snowmobile
Kai's Blade Cycle & Zane's Snowmobile 70667 combines two Ninjago vehicles in a single set, built from 377 pieces. Four minifigures are included, a solid figure-to-part ratio for a two-vehicle set. With 177 unique parts and a colour scheme of black, light bluish grey, pearl gold and dark bluish grey, the set has a distinctly wintery Ninjago feel.
- Set number
- 70667
- Year
- 2019
- Pieces
- 377
- Minifigures
- 4
- Theme
- Ninjago
- Different parts
- 177
Parts list 177
-
Plate Round 1 × 1 with Solid Stud
× 14
-
Plate Round 1 × 1 with Solid Stud
× 10
-
Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard]
× 10
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced
× 7
-
Tile Special 1 × 2 Grille with Bottom Groove
× 6
-
Plate 1 × 2
× 6
-
Plate 1 × 2
× 5
-
Technic Axle 3
× 5
-
Plate Special 1 × 2 Rounded with 2 Open Studs
× 5
-
Wedge Plate 3 × 6 Cut Corners
× 4
-
Plate 2 × 2 Corner
× 4
-
Technic Pin with Friction Ridges Lengthwise and Center Slots
No longer produced · last seen 2021
× 4
-
Technic Pin 1/2 without Friction Ridges
× 4
-
Panel 1 × 1 × 1 Corner
× 4
-
Technic Axle and Pin Connector Perpendicular
× 4
-
Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle)
× 4
-
Brick Curved 4 × 1 No Studs [Stud Holder with Symmetric Ridges]
× 4
-
Tile Special 1 × 1 with Clip with Rounded Edges
× 4
-
Technic Pin Connector Hub with 1 Axle
× 4
-
Technic Axle 2 Notched
× 4
-
Technic Axle Pin with Friction Ridges Lengthwise
× 4
-
Brick Curved 2 × 2 × 2/3 Two Studs and Curved Slope End
× 4
-
Technic Axle Connector Smooth [with x Hole + Orientation]
× 4
-
Brick Sloped 30° 1 × 2 × 2/3
× 4
-
Plate 2 × 4
× 3
-
Technic Bush
× 3
-
Plate Special 2 × 2 with 1 Pin Hole [Complete Underside Rib]
× 3
-
Plate Special 1 × 2 with Clip Horizontal on Side
× 3
-
Technic Axle 5 with Stop
× 3
-
Wheel 30.4 × 20 without Pinholes, with Reinforced Rim
× 3
-
Plate Special 1 × 2 with Clips Horizontal [Open O Clips]
× 3
-
Tile 1 × 3
× 3
-
Technic Brick 1 × 2 with Hole and Dual Beam Extensions
× 3
-
Bracket 1 × 2 - 1 × 2 Inverted
× 3
-
Plate 2 × 2 Corner
× 2
-
Plate Round 2 × 2 with Rounded Bottom [Boat Stud]
× 2
-
Technic Disc 3 × 3
× 2
-
Plate 2 × 3
× 2
-
Plate 2 × 3
× 2
-
Plate 2 × 2
× 2
-
Plate 1 × 2
× 2
-
Plate 1 × 2
× 2
-
Plate 2 × 8
× 2
-
Brick Sloped 45° 2 × 2
× 2
-
Technic Brick 1 × 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin
× 2
-
Technic Brick 1 × 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin
× 2
-
Technic Brick 1 × 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin
× 2
-
Plate 1 × 3
× 2
-
Brick Sloped Inverted 45° 2 × 1
× 2
-
Technic Brick 1 × 2 [1 Pin Hole]
× 2
-
Plate 1 × 4
× 2
-
Plate Round 1 × 1 with Solid Stud
× 2
-
Technic Beam 1 × 3 Thin
× 2
-
Plate Special 1 × 2 with Clip Horizontal on Side
× 2
-
Brick Curved 2 × 1 No Studs [1/2 Bow]
× 2
-
Brick Curved 2 × 2 × 2/3
× 2
-
Launcher Trigger, Weapon Gun Trigger
× 2
-
Launcher, Plate Special 1 × 2 with Mini Blaster
No longer produced · last seen 2022
× 2
-
Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle
× 2
-
Bracket 3 × 2 × 1 1/3 with Pin Bottom
No longer produced · last seen 2021
× 2
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (18)
These extra parts come with the set in case one gets lost.
-
Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard]
× 2
-
Plate Round 1 × 1 with Open Stud
× 2
-
Weapon Throwing Star / Shuriken with Textured Grips
× 2
-
Technic Pin with Friction Ridges Lengthwise and Center Slots
No longer produced · last seen 2021
× 1
-
Launcher Trigger, Weapon Gun Trigger
× 1
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced
× 1
-
Technic Pin without Friction Ridges Lengthwise
× 1
-
Technic Bush
× 1
-
Technic Pin 1/2 without Friction Ridges
× 1
-
Pneumatic T-Piece (T Bar) [New Style]
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 1
-
Tyre 14 × 4 Smooth Small Single [New Style]
× 1
-
Weapon Lightsaber Hilt with Bottom Ring
× 1
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium
× 1
-
Arm Skeleton [Bent / 2 Clips]
× 1
Minifigures 4
-
Kai (Legacy)
× 1
-
Zane (Legacy)
× 1
-
Lasha (Legacy)
× 1
-
Spitta (Legacy)
× 1
Description
Two vehicles in one set
Rather than a single model, this set delivers two separate vehicles: a nimble Blade Cycle for Kai and a Snowmobile for Zane. With 377 pieces split fairly evenly between both models, neither one ends up feeling too small or noticeably under-detailed. This split works particularly well for building or playing together as a duo, since both vehicles can be used side by side rather than sharing a single model between two people, which is handy for siblings.
Four minifigures for chase scenes
With four minifigures, both vehicles come ready to crew, which sets up chases and small duel scenes between the ninja and their opponents. This spread across several figures is typical of two-vehicle Ninjago sets and creates noticeably more play variety than a set built around just a single character. Exactly which figures are included and what parts make up their gear is shown in detail on the parts list on this page, along with the exact colours used for each.
A wintery palette with pearl gold accents
The combination of black, light bluish grey and dark bluish grey creates a cool, wintery base that suits the snowmobile, while pearl gold appears as a premium accent across both vehicles. With 177 unique parts, there is enough variety to carry that colour scheme through consistently rather than the vehicles looking flat or repetitive. The parts list on this page shows exactly where each colour is used.
A good fit for vehicle-focused Ninjago collections
Because the set delivers two vehicles rather than one, it suits Ninjago collections looking specifically for winter-themed vehicles. At 377 pieces, the combined build time for both models stays perfectly manageable, which also makes it a reasonable shared project for two builders on a quiet afternoon together. The 177 parts are useful afterwards for custom Ninjago-style vehicle ideas once the original models are finished, especially given the range of grey and gold pieces available to mix and match freely.
FAQ
- How many vehicles does the set include?
- It includes two separate vehicles: a Blade Cycle for Kai and a Snowmobile for Zane.
- How many minifigures come with the set?
- Four minifigures are included, enough to crew both vehicles at once.
- What colours define the set?
- Black, light bluish grey and dark bluish grey form the wintery base, with pearl gold used as an accent on both vehicles, as shown on the parts list on this page.



