
Titan Mech Battle
Titan Mech Battle sets two large robots against each other: 755 pieces and five minifigures make up this 2015 Ninjago set. A light-coloured Titan mech faces off against a dark counterpart, both built with jointed arms and hips for genuine duel poses. With 224 unique elements, the set effectively delivers two full-sized models in one box.
- Set number
- 70737
- Year
- 2015
- Pieces
- 755
- Minifigures
- 5
- Theme
- Ninjago
- Different parts
- 224
Parts list 224
-
Plate 1 × 2
No longer produced · last seen 2022
× 39
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 14
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium
× 14
-
Arm Mechanical with Clip [Thick Support]
× 14
-
Plate Round 1 × 1 with Solid Stud
× 12
-
Plate Special 1 × 2 with Handle on End [Closed Ends]
× 12
-
Brick 1 × 2
× 10
-
Plate 1 × 2
× 10
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
No longer produced · last seen 2019
× 10
-
Technic Brick Special 2 × 2 with Ball Socket Wide and Axle Hole
No longer produced · last seen 2021
× 10
-
Brick 1 × 1
× 8
-
Brick Round 2 × 2 with Axle Hole
No longer produced · last seen 2021
× 8
-
Tile Special 1 × 1 with Clip with Rounded Edges
× 8
-
Plate Special 1 × 2 with Handle on End [Closed Ends]
× 8
-
Brick 1 × 1
× 7
-
Technic Brick 1 × 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin
× 7
-
Plate 2 × 6
× 7
-
Technic Pin 1/2 without Friction Ridges
× 7
-
Brick Curved 2 × 2 × 2/3
× 7
-
Plate Round 2 × 2 with Rounded Bottom [Boat Stud]
× 6
-
Plate 2 × 4
× 6
-
Brick Sloped Inverted 45° 2 × 1
× 6
-
Plate Round 1 × 1 with Solid Stud
× 6
-
Tile Special 2 × 2 Inverted
× 6
-
Brick Special 1 × 2 with 2 Studs on 1 Side
× 6
-
Brick Curved 2 × 1 No Studs [1/2 Bow]
No longer produced · last seen 2015
× 6
-
Tile Round 2 × 2 with Bottom Stud Holder
× 6
-
Brick Sloped 45° 2 × 1 Triple with Inside Stud Holder
× 6
-
Brick Sloped 45° 2 × 1 Triple with Inside Stud Holder
× 6
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
× 6
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
× 6
-
Brick Sloped 45° 2 × 1 with Bottom Pin
× 6
-
Brick Sloped Inverted 34° 3 × 1 with Internal Stopper
No longer produced · last seen 2020
× 6
-
Brick Curved 3 × 1 No Studs
× 6
-
Technic Brick Special 2 × 2 with Ball and Axle Hole, with 6 Holes in Ball
No longer produced · last seen 2024
× 6
-
Plate Special 1 × 2 with Clip Horizontal on End
× 6
-
Bucket 1 × 1 × 1 Handle
× 6
-
Tile Round 1 × 1
No longer produced · last seen 2015
× 6
-
Arm Mechanical with Clip [Thick Support]
No longer produced · last seen 2024
× 6
-
Tile Special 1 × 2 Grille with Bottom Groove
× 5
-
Brick 1 × 2
× 5
-
Plate 2 × 4
× 5
-
Technic Brick 1 × 2 [1 Pin Hole]
× 5
-
Brick Sloped Inverted 33° 3 × 2, Connections between Studs, Ovoid Bottom Pin
No longer produced · last seen 2022
× 5
-
Plate Special 1 × 1 with Clip Light, Bar Hole [Thick Ring]
× 5
-
Plate Special 1 × 2 with Clips Horizontal [Open O Clips]
× 5
-
Plate Round 1 × 1 with Solid Stud
× 5
-
Hinge Plate 1 × 4 Swivel Top / Base - Solid Clip [Complete Assembly]
No longer produced · last seen 2024
× 5
-
Brick Sloped 30° 1 × 2 × 2/3
× 5
-
Brick Curved 4 × 1 Double with No Studs
× 5
-
Plate 2 × 2 Corner
× 4
-
Brick 2 × 2
× 4
-
Plate 2 × 3
× 4
-
Brick Sloped 45° 2 × 2 Double Convex
× 4
-
Plate 1 × 6
× 4
-
Brick Sloped Inverted 45° 4 × 2 Double with 2 × 2 Recessed
× 4
-
Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle)
× 4
-
Large Figure Weapon Blade, Curved Tip with Axle
No longer produced · last seen 2015
× 4
-
Brick Sloped 45° 2 × 1 with 2/3 Cutout [New Version]
× 4
-
Plate Round 2 × 2 with Axle Hole Type 1 (+ Opening)
× 4
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (20)
These extra parts come with the set in case one gets lost.
-
Technic Pin 1/2 without Friction Ridges
× 2
-
Plate Round 1 × 1 with Solid Stud
× 2
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small
× 2
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
No longer produced · last seen 2019
× 2
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 2
-
Weapon Throwing Star / Shuriken with Textured Grips
× 2
-
Bucket 1 × 1 × 1 Handle
× 2
-
Tile Round 1 × 1
No longer produced · last seen 2015
× 2
-
Technic Pin with Friction Ridges Lengthwise and Center Slots
No longer produced · last seen 2021
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Launcher Trigger, Weapon Gun Trigger
× 1
-
Pneumatic T-Piece (T Bar) [New Style]
× 1
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small
× 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 1
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium
× 1
-
Tile Round 1 × 1
× 1
-
Tile Round 1 × 1
× 1
-
Weapon Sai
× 1
Minifigures 5
Description
A duel, not just a display piece
Both mechs are similarly sized but opposite in styling, and both come with articulated arms, rotating hips and, in places, grabbing hands, so the two robots can genuinely be posed against each other rather than standing side by side as static props. That head-to-head setup sets this set apart from most Ninjago releases, which typically centre on a single hero vehicle rather than a matched pair. Building both mechs back to back makes the shared hip-and-arm mechanism obvious, even though the outer shell differs between the two builds.
Five figures split across two sides
The five minifigures are divided between the two mechs, either seated in a cockpit or stationed at the base, so neither robot goes without a crew. That split makes the set a reasonable pick for collectors after figures from both sides of the Ninjago story rather than just the protagonists, and it keeps both models feeling complete on their own. In play, it means both mechs can be crewed and squared off against each other at once, rather than one side waiting for a spare figure.
Light versus dark, piece for piece
White, light and dark bluish grey, and black are used deliberately to separate the two mechs at a glance, with the lighter robot standing out clearly against its darker opponent. Out of 755 pieces, 224 are unique elements, a solid figure for a set building two full-scale models rather than one. The parts list on this page shows exactly how the light and dark elements are split between the two mechs, useful if you want to keep the colour balance even.
Building two models back to back
Because the set produces two complete mechs, the build splits into two related but distinct stages, which makes it a good way to learn a joint or hip-rotation technique once and then apply it again straight away on the second model. The parts list on this page shows which elements go into each mech and how the black and white tones are distributed between them. For children who like acting out duels, that means two evenly matched opponents from the start, rather than one hero and a background figure.
FAQ
- How many pieces and minifigures does Titan Mech Battle include?
- Set 70737 contains 755 pieces and five minifigures.
- Do you build one mech or two?
- The set includes two opposing combat mechs, one light-coloured and one dark, built to face off against each other.
- How does the parts list handle two separate models?
- The list on this page covers all 224 unique elements, so you can see which parts belong to which mech.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



