
Condrai Copter Attack
Condrai Copter Attack (70746) is part of the LEGO® Ninjago range and models a combat helicopter flown by the Sky Pirates faction from the Possession storyline. At 311 pieces, 3 minifigures and 96 unique elements, it's a compact but feature-dense vehicle set. This page's parts list breaks down every element, from the dark tan hull plates to the dark purple accents.
- Set number
- 70746
- Year
- 2015
- Pieces
- 311
- Minifigures
- 3
- Theme
- Ninjago
- Different parts
- 96
Parts list 96
-
Plate 1 × 2
× 20
-
Brick Sloped 30° 1 × 2 × 2/3
× 16
-
Tile Special 1 × 1 with Clip with Rounded Edges
× 12
-
Brick Curved 2 × 1 No Studs [1/2 Bow]
× 11
-
Wedge Plate 2 × 4
× 10
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small
× 10
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 9
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium
× 9
-
Plate 1 × 6
× 8
-
Plate Special 1 × 1 with Clip Horizontal [Thick Open O Clip]
× 8
-
Plate 2 × 4
× 7
-
Plate 2 × 6
× 7
-
Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]
× 6
-
Panel 1 × 2 × 1 [Square Corners]
No longer produced · last seen 2015
× 6
-
Plate Special 2 × 2 with Groove and Center Stud (Jumper)
× 6
-
Plate Special 1 × 2, Top Clip [Split]
No longer produced · last seen 2021
× 6
-
Bracket 1 × 2 - 2 × 2 Inverted
× 6
-
Wedge Plate 3 × 6 Cut Corners
× 4
-
Brick 2 × 3
× 4
-
Plate 2 × 2
× 4
-
Cone 1 × 1 [Top Groove]
× 4
-
Animal Body Part, Dog Bone [Long]
× 4
-
Tile Round 1 × 1
No longer produced · last seen 2015
× 4
-
Technic Pin with Friction Ridges Lengthwise and Center Slots
No longer produced · last seen 2021
× 3
-
Plate 1 × 2
× 3
-
Technic Brick 1 × 2 [1 Pin Hole]
× 3
-
Tile Special 2 × 2 Inverted
× 3
-
Brick Sloped 45° 2 × 1 with 2/3 Cutout [New Version]
× 3
-
Technic Cylinder 4 × 4 with Pin Holes and Centre Bar, Closed Sides on Bar
× 3
-
Jet Engine Fan with 10 Blades and Technic Pin
No longer produced · last seen 2024
× 3
-
Brick Wedged, Curved 2 × 3 × 2/3 Two Studs, Wing End
No longer produced · last seen 2024
× 3
-
Wedge Plate 3 × 6 Cut Corners
× 2
-
Plate 2 × 2 Corner
× 2
-
Brick 1 × 2
× 2
-
Weapon Sword / Katana / Shamshir with Uncapped Pommel [Square Guard]
No longer produced · last seen 2015
× 2
-
Plate 1 × 1
× 2
-
Brick 1 × 3
× 2
-
Technic Brick 1 × 2 [1 Pin Hole]
× 2
-
Plate 1 × 4
× 2
-
Technic Pin 1/2 without Friction Ridges
× 2
-
Plate 2 × 16
× 2
-
Plate 1 × 10
× 2
-
Torso Skeleton [Thin Shoulder Pins]
No longer produced · last seen 2016
× 2
-
Brick Curved 4 × 1 No Studs [Stud Holder with Symmetric Ridges]
× 2
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
× 2
-
Brick Arch 1 × 8 × 2 Raised
× 2
-
Brick Special 1 × 4 with 4 Studs on One Side
× 2
-
Brick Sloped Inverted 33° 3 × 2, Connections between Studs, Ovoid Bottom Pin
No longer produced · last seen 2024
× 2
-
Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction
× 2
-
Brick Wedged, Curved 4 × 4 No Top Studs
No longer produced · last seen 2015
× 2
-
Technic Brick Special 2 × 2 with Pin Hole, Rotation Joint Ball Half [Vertical Side]
× 2
-
Brick Curved 3 × 1 No Studs
× 2
-
Wedge Plate 2 × 4
× 2
-
Brick Special 1 × 1 with Clip Vertical [Open O Clip, Hollow Stud]
× 2
-
Technic Pin 1/2 with 2L Bar Extension
× 2
-
Plate Special 1 × 2 with Clip Horizontal on End
× 2
-
Hinge Plate 1 × 4 Swivel Top / Base - Solid Clip [Complete Assembly]
No longer produced · last seen 2024
× 2
-
Panel 1 × 2 × 3 [Side Supports / Hollow Studs]
× 2
-
Brick Wedged 2 × 2 Facet
× 2
-
Weapon Crossbow and Bolt
No longer produced · last seen 2017
× 1
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (11)
These extra parts come with the set in case one gets lost.
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium
× 3
-
Technic Pin with Friction Ridges Lengthwise and Center Slots
No longer produced · last seen 2021
× 2
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 2
-
Weapon Bladed Claw Spread
× 1
-
Weapon Sword / Katana / Shamshir with Uncapped Pommel [Square Guard]
No longer produced · last seen 2015
× 1
-
Plate 1 × 1
× 1
-
Technic Pin 1/2 without Friction Ridges
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small
× 1
-
Tile Round 1 × 1
× 1
-
Tile Round 1 × 1
No longer produced · last seen 2015
× 1
Minifigures 3
Alternative models
Fan models by Rebrickable users that you can build (mostly) from this set’s parts. Instructions are available from the designers.
What can I build with it?Description
A helicopter built for sky pirates
The Sky Pirates are the antagonist faction from the Ninjago storyline centred on the djinn pirate Nadakhan, and the Condrai Copter is one of their airborne vehicles. Its colour palette of dark tan, black and dark purple breaks clearly from the bolder base colours of earlier Ninjago waves, giving the faction its own darker visual identity. The main rotor spins freely, and side-mounted weapon points add play value for duels against the ninja vehicles from the same storyline. The cockpit itself is hinged so the minifigure stays visible during play.
96 elements packed into a focused build
At 96 unique elements out of 311 total pieces, the ratio of specialised parts to standard bricks runs well above average for a comparable vehicle set. The rotor blades, joint pieces and the theme's signature dark tan elements stand out in particular. This page's parts list gives every element by colour and quantity, useful if you're hunting Ninjago-specific pieces for your own pirate or aircraft builds. The dark purple bricks especially are noticeably rarer across other Ninjago waves.
Three minifigures from the Possession story
Three minifigures come with the set, drawn from the Sky Pirates storyline built around Nadakhan. Their pirate-style gear and unusual headwear set them apart clearly from the classic ninja figures, and they combine well with other sets from the same storyline for a bigger aerial battle scene. Individual weapon pieces carried by the figures also lean visibly into the pirate motif. Anyone collecting the full Sky Pirates faction gets three of its central characters in one box.
Where it fits in Ninjago's 2015 wave
At 311 pieces, Condrai Copter Attack counts as a mid-size release within Ninjago's 2015 line-up. For collectors completing the Sky Pirates storyline, it's one of several Condrai vehicles in the range and pairs naturally with the matching ninja counterparts from the same season, letting both sides of the story sit on the same shelf. Its compact size also makes it an affordable way into this later Ninjago season.
FAQ
- How many pieces and minifigures does Condrai Copter Attack include?
- Set 70746 has 311 pieces with 96 unique elements, plus 3 minifigures.
- Which Ninjago storyline is this set part of?
- It belongs to the Sky Pirates storyline centred on the djinn pirate Nadakhan from the Ninjago series.
- What colours define the vehicle?
- Dark tan and black form the base, with dark purple and dark bluish grey as accent colours — the exact breakdown is in the parts list on this page.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



