
Xbox 360 Starter Pack
The Xbox 360 Starter Pack 71173 is built for owners of the older Xbox console generation, bringing LEGO Dimensions and its 268 pieces and 3 minifigures to already-established hardware. The contents match the versions sold for newer consoles exactly, it is simply proof that LEGO Dimensions deliberately supported older systems too. Light bluish grey, black, dark blue and trans-light blue define the look, as with every Starter Pack.
- Set number
- 71173
- Year
- 2015
- Pieces
- 268
- Minifigures
- 3
- Theme
- Dimensions
- Different parts
- 94
Parts list 94
-
Brick Curved 2 × 1 No Studs [1/2 Bow]
× 14
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 14
-
Tile Round 1 × 1
× 14
-
Tile 1 × 2 with Groove
× 10
-
Tile Special 1 × 2 Grille with Bottom Groove
× 9
-
Wedge Plate 4 Stud 45° Angle Plate
No longer produced · last seen 2024
× 8
-
Creature Body Part, Barb Large (Claw, Talon) with Clip
No longer produced · last seen 2019
× 8
-
Plate 2 × 3
× 6
-
Plate 2 × 3
× 6
-
Plate Special 1 × 2 with Handles on Ends
× 6
-
Plate Special 1 × 2 Side Handle [Free Ends]
× 5
-
Tile Special 1 × 1 with Clip with Rounded Edges
× 5
-
Brick Sloped 18° 2 × 1 × 2/3 with 4 Slots / Grate
× 5
-
Plate Special 1 × 2 with Clip Horizontal on End
× 5
-
Tile Special 1 × 2 Grille with Bottom Groove
× 4
-
Plate 1 × 2
× 4
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
× 4
-
Tyre 14 × 9 Smooth Small Wide Slick
× 4
-
Panel 1 × 2 × 1 [Rounded Corners]
× 4
-
Wheel 8 × 9 with Hole Notched for Wheels Holder Pin, Re-inforced Back
× 4
-
Plate Special 1 × 2 Side Handle [Free Ends]
× 3
-
Plate 2 × 2
× 3
-
Plate Round 1 × 1 with Solid Stud
× 3
-
Hero Factory Minifigure Arm [2 Clips at 90°]
No longer produced · last seen 2016
× 3
-
Weapon Batarang
× 3
-
Wedge Plate 3 × 6 Cut Corners
× 2
-
Brick 2 × 2
× 2
-
Brick 1 × 1
× 2
-
Plate 2 × 4
× 2
-
Plate 2 × 4
× 2
-
Brick Sloped 45° 2 × 2 Double Convex
× 2
-
Brick Sloped 33° 3 × 3 Double Convex
× 2
-
Brick Sloped 33° 3 × 1
No longer produced · last seen 2022
× 2
-
Dish 2 × 2 Inverted [Radar]
× 2
-
Brick Curved 1 × 2 × 1 1/3 with Curved Top
× 2
-
Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle)
× 2
-
Technic Beam 1 × 3 Thin
× 2
-
Brick Curved 2 × 1 No Studs [1/2 Bow]
× 2
-
Brick Curved 2 × 1 No Studs [1/2 Bow]
× 2
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
× 2
-
Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle
× 2
-
Plate Special 1 × 2 with Wheel Holder, Single Slit
No longer produced · last seen 2021
× 2
-
Technic Brick 1 × 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin
× 2
-
Brick Sloped Inverted 34° 3 × 1 with Internal Stopper
No longer produced · last seen 2020
× 2
-
Flag 2 × 2 Trapezoid with Flat Area between Clips
No longer produced · last seen 2021
× 2
-
Plate Special 1 × 1 with Tooth
× 2
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 2
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 2
-
Brick Special 1 × 1 with Clip Horizontal
× 2
-
Brick Sloped 18° 4 × 1
× 2
-
Plate Special 1 × 1 with Clip Horizontal [Thick Open O Clip]
× 2
-
Windscreen 3 × 6 × 1 Curved with 2 Circular Stud Holders in Bottom
No longer produced · last seen 2017
× 2
-
Brick Sloped 30° 1 × 2 × 2/3
× 2
-
Handlebars with Angular Handles
× 2
-
Function Brick Round 4 × 4 × 2/3 with 4 Studs (Generic for Gadgets)
No longer produced · last seen 2016
× 1
-
Function Brick Round 4 × 4 × 2/3 with 2 Studs and Batman Symbol print
No longer produced · last seen 2015
× 1
-
Function Brick Round 4 × 4 × 2/3 with 2 Studs and Light Blue and Pink 'WS' Print
No longer produced · last seen 2015
× 1
-
Function Brick Round 4 × 4 × 2/3 with 2 Studs and White Rune Character Print
No longer produced · last seen 2015
× 1
-
Lever Small Base with Black Lever
× 1
-
Plate 2 × 4
× 1
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (11)
These extra parts come with the set in case one gets lost.
-
Plate Round 1 × 1 with Solid Stud
× 2
-
Weapon Batarang
× 2
-
Lever Small Base with Black Lever
× 1
-
Tile 1 × 1 with Groove
× 1
-
Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip]
No longer produced · last seen 2023
× 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 1
-
Tile Round 1 × 1
× 1
-
Tile Round 1 × 1
× 1
Minifigures 3
Description
Support for an older console generation
While many 2015 game releases already targeted newer consoles exclusively, LEGO Dimensions deliberately covered the Xbox 360 too, an established platform with a large existing install base. The Xbox 360 Starter Pack is physically identical to the versions built for newer consoles, only the technology inside the Toy Pad is matched to the older hardware. For households that had not yet upgraded, that meant access to exactly the same game content without needing to buy new hardware first.
The same build as the newer versions
The 268 pieces split the same way as every Starter Pack, into 3 minifigures, a vehicle and the multi-part Toy Pad, built from 94 different part types. Anyone familiar with a Starter Pack for a different console will find essentially the same building experience here, the only real difference being how the Toy Pad connects to the console itself. That distinction has no bearing on the parts list on this page, which applies regardless of which console version is actually on hand.
Minifigures that stand on their own
The 3 included minifigures work as ordinary minifigures independent of the console, and can be built and displayed without ever being connected to a Toy Pad. For collectors who do not own an Xbox 360 at all, that keeps a meaningful part of the set's value separate from the video game side entirely. Combined with the included vehicle in dark blue and light bluish grey, the result is a compact building set that still serves a purpose without the console it was designed for.
Parts and colours in detail
A large share of the 94 different part types goes into the Toy Pad's own construction, visible in the flat, interlocking plates in light bluish grey and black. Trans-light blue adds targeted accents at the connecting points, while dark blue appears mostly on the vehicle. The full breakdown by colour and building group is available in the parts list on this page, useful for anyone hunting down a specific replacement piece or comparing the set against other Starter Packs.
FAQ
- Why was a separate Starter Pack made for the Xbox 360?
- LEGO Dimensions deliberately supported older, widely owned consoles such as the Xbox 360 in 2015, which is why a dedicated Toy Pad was made for that hardware.
- Does the build differ from other Starter Packs?
- No, with 268 pieces, 3 minifigures and a vehicle it matches the versions for newer consoles, only the Toy Pad's technology is adapted.
- Can the minifigures be used without the console?
- Yes, the 3 minifigures work as standalone minifigures independent of the video game.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



