
LEGO® Empire Temple of Madness
Empire Temple of Madness is a 2020 LEGO® Ninjago set depicting a dark temple riddled with traps and hidden mechanisms. At 820 pieces with 6 minifigures, it counts among the larger sets of its storyline. The colour mix of black, red and glowing orange gives it a threatening, fiery look.
- Set number
- 71712
- Year
- 2020
- Pieces
- 820
- Minifigures
- 6
- Theme
- Ninjago
- Different parts
- 264
Parts list 264
-
Plate Special 2 × 2 with 2 Pin Holes × 30
-
Tile Special 2 × 2 Corner with Cut Corner - Facet × 21
-
Technic Pin with Friction Ridges Lengthwise and Center Slots No longer produced · last seen 2021 × 16
-
Plate Special 1 × 2 with Pin Hole Underneath × 16
-
Technic Axle Pin with Friction Ridges Lengthwise × 11
-
Plate 1 × 2 × 10
-
Tile 2 × 2 with Groove × 9
-
Plate Special 1 × 2, Top Clip [Split] No longer produced · last seen 2021 × 9![Plate Special 1 × 2, Top Clip [Split] Black](/media/parts/92280/0/plate-special-1-x-2-top-clip-split-black.jpg)
-
Brick Round 2 × 2 with Axle Hole No longer produced · last seen 2020 × 8
-
Tap 1 × 1 without Hole in Spout × 8
-
Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots No longer produced · last seen 2021 × 8
-
Support 2 × 2 × 10 Girder Triangular Vertical - Type 4 - 3 Posts, 3 Sections × 8
-
Plate 1 × 3 × 7
-
Bracket 1 × 2 - 1 × 2 Inverted × 7
-
Plate 1 × 2 × 6
-
Plate 4 × 10 × 6
-
Dish 2 × 2 Inverted [Radar] × 6![Dish 2 × 2 Inverted [Radar] Black](/media/parts/4740/0/dish-2-x-2-inverted-radar-black.jpg)
-
Plate Round 1 × 1 with Solid Stud No longer produced · last seen 2021 × 6
-
Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle × 6
-
Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise No longer produced · last seen 2020 × 6
-
Panel 1 × 4 × 1 with Rounded Corners [Thin Wall] × 6![Panel 1 × 4 × 1 with Rounded Corners [Thin Wall] Black](/media/parts/15207/0/panel-1-x-4-x-1-with-rounded-corners-thin-wall-black.jpg)
-
Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] No longer produced · last seen 2021 × 6![Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] Yellowish Green](/media/parts/21459/158/weapon-sword-katana-shamshir-with-capped-pommel-square-guard-yellowish-green.jpg)
-
Plate Special 1 × 1 Rounded with Handle × 6
-
Wedge Plate 2 × 2 Cut Corner × 6
-
Brick Sloped 45° 2 × 1 with 2/3 Inverted Cutout and no stud × 6
-
Brick Round 1 × 1 Open Stud × 6
-
Plate Special 1 × 2, Top Clip [Split] No longer produced · last seen 2021 × 6![Plate Special 1 × 2, Top Clip [Split] Light Bluish Gray](/media/parts/92280/71/plate-special-1-x-2-top-clip-split-light-bluish-gray.jpg)
-
Technic Axle 4 × 5
-
Brick Round 2 × 2 with Axle Hole × 5
-
Cone 3 × 3 × 2 × 5
-
Brick Sloped 45° 2 × 1 with 2/3 Cutout [New Version] × 5![Brick Sloped 45° 2 × 1 with 2/3 Cutout [New Version] Red](/media/parts/15672/4/brick-sloped-45-2-x-1-with-23-cutout-new-version-red.jpg)
-
Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] No longer produced · last seen 2023 × 5![Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] Red](/media/parts/21459/4/weapon-sword-katana-shamshir-with-capped-pommel-square-guard-red.jpg)
-
Brick Curved Inverted 2 × 1 × 5
-
Tile Round 1 × 1 Half Circle × 5
-
Tile 2 × 2 Curved, Macaroni × 5
-
Flag 7 × 3 with Rod No longer produced · last seen 2020 × 5
-
Bar 4L (Lightsaber Blade / Wand) No longer produced · last seen 2020 × 5
-
Hinge Cylinder 1 × 2 Locking with 2 Click Fingers and Axle Hole, 9 Teeth No longer produced · last seen 2020 × 5
-
Technic Brick 1 × 14 [13 Pin Holes] × 5![Technic Brick 1 × 14 [13 Pin Holes] Black](/media/parts/32018/0/technic-brick-1-x-14-13-pin-holes-black.jpg)
-
Technic Axle and Pin Connector Angled #2 - 180° × 5
-
Plate Special 1 × 2 with Clip Horizontal on End × 5
-
Brick Sloped 30° 1 × 2 × 2/3 × 5
-
Hinge Plate 2 × 2 Locking with 1 Finger on Top × 5
-
Tile 1 × 4 with Groove × 4
-
Tile 1 × 4 with Groove × 4
-
Brick 1 × 2 × 5 with Hollow Studs × 4
-
Plate 2 × 2 × 4
-
Brick Curved 2 × 1 No Studs [1/2 Bow] × 4![Brick Curved 2 × 1 No Studs [1/2 Bow] Dark Turquoise](/media/parts/11477/3/brick-curved-2-x-1-no-studs-12-bow-dark-turquoise.jpg)
-
Brick Curved Inverted 4 × 1 × 4
-
Road Sign Clip-on 2 × 2 Square [Thick Open O Clip] No longer produced · last seen 2023 × 4![Road Sign Clip-on 2 × 2 Square [Thick Open O Clip] Dark Bluish Gray](/media/parts/15210/72/road-sign-clip-on-2-x-2-square-thick-open-o-clip-dark-bluish-gray.jpg)
-
Tile Special 1 × 1 with Clip with Rounded Edges × 4
-
Tile Special 1 × 1 with Clip with Rounded Edges × 4
-
Brick Sloped 55° 1 × 6 × 5 No longer produced · last seen 2023 × 4
-
Tile 1 × 2 with Groove × 4
-
Tile 1 × 2 with Groove × 4
-
Technic Brick 1 × 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin × 4![Technic Brick 1 × 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin Dark Bluish Gray](/media/parts/32064a/72/technic-brick-1-x-2-with-axle-hole-type-1-opening-and-bottom-pin-dark-bluish-gray.jpg)
-
Technic Knob Wheel × 4
-
Brick 1 × 2 × 2 with Inside Stud Holder × 4
-
Technic Plate 2 × 4 [3 Holes] × 4![Technic Plate 2 × 4 [3 Holes] Black](/media/parts/3709/0/technic-plate-2-x-4-3-holes-black.jpg)
-
Plate 2 × 10 × 4
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Minifigures 6
Description
A temple full of traps
The model shows a multi-storey temple fitted with collapsible walls, hidden mechanisms and traps, typical of the Ninjago storyline built around forbidden temples. Rather than a single static building, the result is a scene with several usable levels and action features that can be triggered during play. Six minifigures provide enough cast for confrontation scenes between ninja and opponents, mirroring the storyline built around the temple. Stacking the levels also gives the model real presence on a shelf once assembled.
A build focused on function
Rather than looks alone, the set prioritises playable mechanisms: swivelling wall sections, flip-out traps and moving elements let the building change during play instead of looking the same throughout. This approach is typical of larger Ninjago sets, where the story feeds directly into the construction, whether through secret doors or collapsing sections. Anyone who prefers sets with built-in play features over purely static models will find a good example here, since almost every level hides something to trigger.
Colours and parts list
Black and dark bluish grey form the temple's heavy stonework, while red and the glowing trans-neon orange stand in for fire and energy effects that give the scene its menacing mood. With 264 unique parts out of 820 pieces total, part variety runs high, pointing to plenty of structural and detail pieces. The full list of parts and colours is available on this page, handy for finding specific trap pieces or trans-neon orange elements for other dramatic builds of your own.
Who it suits
Empire Temple of Madness suits Ninjago fans who enjoy sets with built-in traps and mechanisms rather than purely static models. With six minifigures, it also offers enough characters for multi-sided confrontation scenes. It works well alongside other temple or Ninjago sets too, since its trap-and-mechanism build style slots easily into similar scenes, especially for anyone building up a wider Ninjago display over several sets.
FAQ
- How many pieces and minifigures does set 71712 have?
- The set has 820 pieces across 264 unique parts, plus 6 minifigures.
- What play features does the temple offer?
- It includes swivelling walls, flip-out traps and other moving mechanisms that can be triggered during play.
- Which colours define the set?
- Mainly black and dark bluish grey for the stonework, with red and glowing trans-neon orange for fire and energy effects.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



