
LEGO® Jay's Titan Mech
Jay's Titan Mech is a LEGO® Ninjago set with 798 pieces and 6 minifigures, built around the lightning ninja Jay's large battle mech. It's made from 247 unique parts, mainly in blue, black, white and light bluish grey. The full parts list is further down this page.
- Set number
- 71785
- Year
- 2023
- Pieces
- 798
- Minifigures
- 6
- Theme
- Ninjago
- Different parts
- 247
Parts list 247
-
Plate 1 × 2 × 19
-
Bracket 1 × 2 - 2 × 2 Inverted × 19
-
Technic Beam 1 × 2 Thick × 15
-
Brick Sloped 45° 2 × 1 with 2/3 Cutout [New Version] × 12![Brick Sloped 45° 2 × 1 with 2/3 Cutout [New Version] White](/media/parts/15672/15/brick-sloped-45-2-x-1-with-23-cutout-new-version-white.jpg)
-
Technic Axle 2 Notched × 12
-
Bracket 1 × 2 - 2 × 2 × 12
-
Technic Pin with Friction Ridges Lengthwise with No Center Slots × 11
-
Plate 1 × 2 × 10
-
Plate 2 × 2 Corner × 9
-
Plate 1 × 4 × 9
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) × 9
-
Plate 1 × 2 × 8
-
Brick Sloped 45° 2 × 1 with 2/3 Cutout [New Version] × 8![Brick Sloped 45° 2 × 1 with 2/3 Cutout [New Version] Blue](/media/parts/15672/1/brick-sloped-45-2-x-1-with-23-cutout-new-version-blue.jpg)
-
Brick Sloped 45° 2 × 1 with 2/3 Inverted Cutout and No Stud × 8
-
Plate Special 1 × 2, Top Clip [Open O] × 8![Plate Special 1 × 2, Top Clip [Open O] Black](/media/parts/44861/0/plate-special-1-x-2-top-clip-open-o-black.jpg)
-
Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction × 8
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 8
-
Bracket 1 × 1 - 1 × 2 Inverted × 8
-
Brick Wedged 2 × 2 Facet × 8
-
Technic Axle 3 with Stud × 6
-
Brick Sloped 45° 2 × 1 Triple with Inside Stud Holder × 6
-
Tile Special 1 × 1 with Clip with Rounded Edges × 6
-
Tile Round 1 × 1 Quarter × 6
-
Tile Special 2 × 2 Corner with Cut Corner - Facet × 6
-
Technic Brick 1 × 2 [2 Pin Holes] × 6![Technic Brick 1 × 2 [2 Pin Holes] White](/media/parts/32000/15/technic-brick-1-x-2-2-pin-holes-white.jpg)
-
Technic Ball Joint with Through Axle Hole × 6
-
Technic Axle Connector 2 × 3 with Ball Socket, Closed Sides × 6
-
Technic Brick 1 × 2 with Hole and Dual Beam Extensions × 6
-
Plate Special 2 × 2 × 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud] No longer produced · last seen 2023 × 6![Plate Special 2 × 2 × 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud] Blue](/media/parts/99206/1/plate-special-2-x-2-x-23-with-two-studs-on-side-and-two-raised-solid-anti-stud-blue.jpg)
-
Bracket 1 × 2 - 2 × 2 Inverted × 6
-
Plate 2 × 3 × 5
-
Plate 2 × 2 × 5
-
Brick Sloped Inverted 45° 2 × 1 × 5
-
Plate Round 1 × 1 with Solid Stud × 5
-
Wedge Plate 3 × 2 Right × 5
-
Wedge Plate 3 × 2 Left × 5
-
Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] × 5![Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] Black](/media/parts/48729b/0/bar-1l-with-clip-cut-edges-and-one-side-hole-gap-in-clip-black.jpg)
-
Plate 2 × 2 Corner × 4
-
Plate 1 × 2 × 4
-
Plate 1 × 3 × 4
-
Technic Axle 4 × 4
-
Technic Axle 4 × 4
-
Plate 1 × 4 × 4
-
Technic Pin 1/2 without Friction Ridges × 4
-
Bracket 5 × 2 × 1 1/3 with Holes, Pin Bottom × 4
-
Brick Curved Inverted 4 × 1 × 4
-
Plate Special 1 × 2 5.9mm Towball Socket × 4
-
Tile Round 2 × 2 with Bottom Stud Holder × 4
-
Plate Special Round 2 × 2 with Center Stud (Jumper Plate) × 4
-
Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] × 4![Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] Pearl Gold](/media/parts/21459/297/weapon-sword-katana-shamshir-with-capped-pommel-square-guard-pearl-gold.jpg)
-
Tile Special 2 × 3 Pentagonal × 4
-
Technic Tread Attachment × 4
-
Plate Special 2 × 2 with Pin on Bottom × 4
-
Brick Sloped 45° 2 × 1 with 2/3 Inverted Cutout and No Stud × 4
-
Brick Sloped 45° 2 × 1 with 2/3 Inverted Cutout and No Stud × 4
-
Brick Wedged, Curved 2 × 1 with Stud Notch Right × 4
-
Brick Wedged, Curved 2 × 1 with Stud Notch Left × 4
-
Technic Brick 1 × 2 [2 Pin Holes] × 4![Technic Brick 1 × 2 [2 Pin Holes] Light Bluish Gray](/media/parts/32000/71/technic-brick-1-x-2-2-pin-holes-light-bluish-gray.jpg)
-
Plate Special 1 × 2 with Door Rail × 4
-
Brick Curved Inverted 2 × 2 × 2/3 × 4
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (32)
These extra parts come with the set in case one gets lost.
-
Weapon Throwing Star / Shuriken, Bone No longer produced · last seen 2023 × 4
-
Minifig Neckwear Lower Jaw with Fangs × 1
-
Weapon Harpoon [Smooth Shaft] × 1![Weapon Harpoon [Smooth Shaft] Pearl Gold](/media/parts/18041/297/weapon-harpoon-smooth-shaft-pearl-gold.jpg)
-
Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] × 1![Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] Pearl Gold](/media/parts/21459/297/weapon-sword-katana-shamshir-with-capped-pommel-square-guard-pearl-gold.jpg)
-
Headwear Accessory, Cross Horns / Bones No longer produced · last seen 2023 × 1
-
Weapon Sword, Bone No longer produced · last seen 2023 × 1
-
Weapon Axe, Bone/Sickle No longer produced · last seen 2023 × 1
-
Plate 1 × 1 × 1
-
Plate 1 × 1 × 1
-
Plate 1 × 1 × 1
-
Plate 1 × 1 × 1
-
Technic Tread Attachment × 1
-
Tile Round 1 × 1 Quarter × 1
-
Tile Round 1 × 1 Quarter × 1
-
Tile 1 × 1 with Groove × 1
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced × 1
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced × 1
-
Technic Pin 1/2 without Friction Ridges × 1
-
Technic Pin 1/2 without Friction Ridges × 1
-
Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] × 1![Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] Black](/media/parts/48729b/0/bar-1l-with-clip-cut-edges-and-one-side-hole-gap-in-clip-black.jpg)
Minifigures 6
Alternative models
Fan models by Rebrickable users that you can build (mostly) from this set’s parts. Instructions are available from the designers.
- 71785 2-in-1 Bundle
- 71785 Mecha
- 71785 Steampunk Revolver
- 71785 Tank Mech
- 71785 Goliath from StarCraft
- 71785 Titan Adventure Playset
- Jay's Titan Mech Rebuild
- Jay's Titan Mech Alternate Build
- Jay's Titan Mech Beast
Description
A mech built for one ninja
Titan Mechs are a recurring format within Ninjago, where a single ninja gets a large, poseable battle robot built in their own elemental colour. Here, that's Jay, the ninja of lightning, and the mech is coloured blue to match, making it instantly distinct from the mechs built for other characters. For collectors lining up several Titan Mechs together, that colour system creates a clear, easy-to-read set of matching, well-coordinated models that work well as a team.
798 pieces behind a working mech
Blue, black, white and light bluish grey echo Jay's familiar look from the show, so the finished mech is easy to identify at a glance. The 798 pieces build a poseable robot body with joints at the arms and legs, plus weapons and accessories that attach to the mech itself. That adds play value beyond looks alone, since the finished model can be posed in different positions and used in play battles rather than just standing on a shelf.
Six minifigures for full scenes
The set includes 6 minifigures, noticeably more than many sets of a similar size, which works well for building out battle scenes between the mech and several opponents at once. That combination of one large model and multiple figures makes the set more versatile than a typical vehicle set with only one or two figures. Anyone who already owns other Ninjago sets can also mix these figures in with existing characters from other stories and expand the cast further.
247 parts in detail
The model uses 247 unique parts in total, all listed in the parts list on this page. That's worth checking if you're after specific joint pieces, weapons or blue specialist bricks, whether for your own modifications or to add to other mech builds. It also makes it easy to judge which parts are useful beyond the finished mech itself before you even open the box or start building.
FAQ
- How many pieces does Jay's Titan Mech (71785) have?
- The set has 798 pieces, including 247 unique parts in blue, black, white and light bluish grey.
- Which ninja does this mech belong to?
- The mech belongs to Jay, the ninja of lightning, whose blue elemental colour runs throughout the model.
- How many minifigures are included?
- The set includes 6 minifigures, enough to act out battle scenes around the mech.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



