
LEGO® Arc Dragon of Focus
The Arc Dragon of Focus is a large-scale dragon model from the LEGO® Ninjago range, arriving with a full cast of eight minifigures. With 872 pieces, it's one of the most figure-rich dragon sets in the current collection.
- Set number
- 71836
- Year
- 2025
- Pieces
- 872
- Minifigures
- 8
- Theme
- Ninjago
- Different parts
- 219
Parts list 219
-
Technic Pin with Friction Ridges Lengthwise with No Center Slots × 30
-
Bracket 1 × 2 - 1 × 2 Inverted × 29
-
Plate 2 × 2 × 21
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small × 20
-
Bracket 1 × 2 - 1 × 2 × 20
-
Brick Curved 2 × 2 × 2/3 × 17
-
Brick Curved 2 × 2 × 2/3 × 17
-
Tile Special 2 × 3 Pentagonal × 15
-
Tile Special 2 × 3 Pentagonal × 15
-
Plate Round 1 × 1 with Open Stud × 14
-
Arm Mechanical with Clip [Thick Support] × 14![Arm Mechanical with Clip [Thick Support] Pearl Gold](/media/parts/98313/297/arm-mechanical-with-clip-thick-support-pearl-gold.jpg)
-
Plate 2 × 4 × 12
-
Plate Special 2 × 2 × 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version × 12![Plate Special 2 × 2 × 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version Light Bluish Gray](/media/parts/4304/71/plate-special-2-x-2-x-23-with-two-studs-on-side-and-two-raised-half-hollow-anti-stud-updated-version-light-bluish-gray.jpg)
-
Plate 2 × 3 × 11
-
Plate 1 × 4 × 11
-
Technic Axle 2 Notched × 11
-
Brick Sloped 45° 1 × 1 × 2/3 Quadruple Convex [Pyramid] × 10![Brick Sloped 45° 1 × 1 × 2/3 Quadruple Convex [Pyramid] Trans-Light Blue](/media/parts/22388/41/brick-sloped-45-1-x-1-x-23-quadruple-convex-pyramid-trans-light-blue.jpg)
-
Technic Beam 1 × 2 Thin × 10
-
Plate 1 × 2 × 9
-
Plate 1 × 2 × 8
-
Brick Sloped 33° 3 × 1 × 8
-
Bracket 1 × 2 - 1 × 4 [Rounded Corners at Bottom, Square Corners at Top] × 8![Bracket 1 × 2 - 1 × 4 [Rounded Corners at Bottom, Square Corners at Top] Black](/media/parts/28802/0/bracket-1-x-2-1-x-4-rounded-corners-at-bottom-square-corners-at-top-black.jpg)
-
Technic Axle Pin with Friction Ridges Lengthwise × 8
-
Cone 1 × 1 [Top Groove] × 8![Cone 1 × 1 [Top Groove] Pearl Gold](/media/parts/59900/297/cone-1-x-1-top-groove-pearl-gold.jpg)
-
Plate Special 1 × 3 Rounded with 3 Open Studs × 8
-
Bracket 1 × 2 - 2 × 2 Inverted × 8
-
Brick Curved 2 × 1 No Studs [1/2 Bow] × 6![Brick Curved 2 × 1 No Studs [1/2 Bow] Tan](/media/parts/11477/19/brick-curved-2-x-1-no-studs-12-bow-tan.jpg)
-
Technic Axle 3 with Stop × 6
-
Technic Axle and Pin Connector Angled #3 - 157.5° × 6
-
Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction × 6
-
Plate Special 1 × 2 [Side Handle Closed Ends] × 6![Plate Special 1 × 2 [Side Handle Closed Ends] Pearl Gold](/media/parts/48336/297/plate-special-1-x-2-side-handle-closed-ends-pearl-gold.jpg)
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 6
-
Technic Brick Special 2 × 2 with Ball and Axle Hole, with 6 Holes in Ball × 6
-
Technic Pin with Friction Ridges Lengthwise and Towball - Round Pin Hole × 6
-
Technic Brick Special 2 × 2 with Ball Socket Wide and Axle Hole, No Arm Holes × 6
-
Bracket 1 × 1 - 1 × 2 Inverted × 6
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium × 6
-
Technic Pin 1/2 with Friction × 6
-
Tile Special 1 × 2 with Sloped Walls AKA Money / Gold Bar [Ingot] × 6![Tile Special 1 × 2 with Sloped Walls AKA Money / Gold Bar [Ingot] Reddish Brown](/media/parts/99563/70/tile-special-1-x-2-with-sloped-walls-aka-money-gold-bar-ingot-reddish-brown.jpg)
-
Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] × 5![Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] Tan](/media/parts/3660/19/brick-sloped-inverted-45-2-x-2-ovoid-bottom-pin-bar-sized-stud-holes-tan.jpg)
-
Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] × 5![Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] Pearl Gold](/media/parts/21459/297/weapon-sword-katana-shamshir-with-capped-pommel-square-guard-pearl-gold.jpg)
-
Plate Special 2 × 2 with Only 2 Studs × 5
-
Animal Body Part, Horn Stacked 45 deg. with Axle Connectors × 4
-
Plate 2 × 2 Corner × 4
-
Brick 1 × 2 × 4
-
Plate 2 × 4 × 4
-
Plate Special 1 × 1 × 2/3 Half Round with Side Stud × 4
-
Technic Axle 8 × 4
-
Technic Axle 3 × 4
-
Brick Sloped Inverted 45° 4 × 2 Double with 2 × 2 Recessed × 4
-
Brick Curved 2 × 1 No Studs [1/2 Bow] × 4![Brick Curved 2 × 1 No Studs [1/2 Bow] Dark Purple](/media/parts/11477/85/brick-curved-2-x-1-no-studs-12-bow-dark-purple.jpg)
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) × 4
-
Brick Sloped 45° 2 × 1 with 2/3 Cutout [New Version] × 4![Brick Sloped 45° 2 × 1 with 2/3 Cutout [New Version] Tan](/media/parts/15672/19/brick-sloped-45-2-x-1-with-23-cutout-new-version-tan.jpg)
-
Brick Sloped 45° 2 × 1 with 2/3 Cutout [New Version] × 4![Brick Sloped 45° 2 × 1 with 2/3 Cutout [New Version] Dark Purple](/media/parts/15672/85/brick-sloped-45-2-x-1-with-23-cutout-new-version-dark-purple.jpg)
-
Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle × 4
-
Plate Special 1 × 2 with End Towball × 4
-
Tile Round 1 × 1 Quarter × 4
-
Tile Round 1 × 1 Quarter × 4
-
Wedge Plate 2 × 2 Cut Corner × 4
-
Bar 4L (Lightsaber Blade / Wand) × 4
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (28)
These extra parts come with the set in case one gets lost.
-
Brick Sloped 45° 1 × 1 × 2/3 Quadruple Convex [Pyramid] × 2![Brick Sloped 45° 1 × 1 × 2/3 Quadruple Convex [Pyramid] Trans-Light Blue](/media/parts/22388/41/brick-sloped-45-1-x-1-x-23-quadruple-convex-pyramid-trans-light-blue.jpg)
-
Technic Pin with Friction Ridges Lengthwise with No Center Slots × 2
-
Plate Round 1 × 1 with Open Stud × 2
-
Technic Bush × 1
-
Plate Special Round 1 × 1 with Hollow Stud and Underside Clip × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Weapon Harpoon [Smooth Shaft] × 1![Weapon Harpoon [Smooth Shaft] Black](/media/parts/18041/0/weapon-harpoon-smooth-shaft-black.jpg)
-
Weapon Harpoon [Smooth Shaft] × 1![Weapon Harpoon [Smooth Shaft] Flat Silver](/media/parts/18041/179/weapon-harpoon-smooth-shaft-flat-silver.jpg)
-
Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] × 1![Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] Flat Silver](/media/parts/21459/179/weapon-sword-katana-shamshir-with-capped-pommel-square-guard-flat-silver.jpg)
-
Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] × 1![Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] Pearl Gold](/media/parts/21459/297/weapon-sword-katana-shamshir-with-capped-pommel-square-guard-pearl-gold.jpg)
-
Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] × 1![Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] Opal Trans-Clear](/media/parts/21459/1055/weapon-sword-katana-shamshir-with-capped-pommel-square-guard-opal-trans-clear.jpg)
-
Weapon Sword / Saber with Curved Blade and Hilt × 1
-
Tile Round 1 × 1 Quarter × 1
-
Tile Round 1 × 1 Quarter × 1
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced × 1
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small × 1
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
Minifigures 8
Description
A dragon as the centrepiece
Dragons have been among the most popular motifs in Ninjago since the theme began, regularly reappearing in new variants with different elements and abilities. The Arc Dragon of Focus features a sweeping, poseable body with outstretched wings and a moveable head suited to different poses. This building approach is typical of the larger dragon models in the range, and for fans, every new dragon is a welcome addition to the growing Ninjago world.
219 unique parts for mobility
With 219 unique parts among 872 pieces overall, the focus sits on moveable joints for the body, wings and tail. The parts list on this page shows how many specialised parts are needed for the dragon's mobility alone, joined by decorative scale and horn elements. That mix makes the build interesting even for experienced Ninjago fans, and shows how detailed modern Ninjago dragons have become. That makes this section another useful starting point for ideas of your own.
Black, tan and pearl gold as the palette
Black and tan form the dragon's core structure, while pearl gold adds refined accents to scales and horns and dark purple contributes further mystical touches of colour. This colour combination stands apart clearly from fire- or ice-themed Ninjago dragons, giving the model its own distinguished look. Anyone who looks closely at the 219 unique parts in this Ninjago set will find plenty of ideas for other projects. With 872 pieces in total, this Ninjago set shows how much construction fits into a single model.
Eight minifigures for big play scenes
With eight minifigures included, this is one of the most figure-rich dragon models in the range, letting the dragon be crewed by several characters at once or set up for larger battle scenes. That makes it especially interesting to collectors of Ninjago figures. The parts list is also useful for matching colours in other dragon-building projects, and play value stays high well after the build since poses and crew can always change.
FAQ
- How many minifigures does the Arc Dragon of Focus have?
- Set 71836 comes with 8 minifigures and 872 pieces in total.
- Can the dragon be posed?
- Yes, the body, wings, tail and head are all moveable, allowing different poses.
- Which LEGO® range is this set from?
- It belongs to the LEGO® Ninjago theme and its range of dragon models.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



