
Parts list 144
-
Plate 1 × 6 × 12
-
Brick Special 1 × 1 with Stud on 1 Side × 12
-
Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] × 11![Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] Dark Bluish Gray](/media/parts/3660/72/brick-sloped-inverted-45-2-x-2-ovoid-bottom-pin-bar-sized-stud-holes-dark-bluish-gray.jpg)
-
Brick Special 1 × 2 with Grille × 10
-
Brick 1 × 2 × 8
-
Technic Axle Pin without Friction Ridges Lengthwise × 8
-
Brick Special 1 × 2 Palisade [aka Log] × 8![Brick Special 1 × 2 Palisade [aka Log] Dark Bluish Gray](/media/parts/30136/72/brick-special-1-x-2-palisade-aka-log-dark-bluish-gray.jpg)
-
Tyre 30.4 × 14 Offset Tread No longer produced · last seen 2012 × 8
-
Wheel 18 × 14 with Pin Hole, Fake Bolts and Shallow Spokes × 8
-
Tile Special 1 × 2 Grille with Bottom Groove × 6
-
Plate 1 × 2 × 6
-
Brick Special 2 × 2 with 2 Pins and Axle Hole × 6
-
Tile 1 × 2 with Groove × 6
-
Plate Special 1 × 2 [Side Handle Closed Ends] × 6![Plate Special 1 × 2 [Side Handle Closed Ends] Yellow](/media/parts/48336/14/plate-special-1-x-2-side-handle-closed-ends-yellow.jpg)
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 6
-
Plate Round 2 × 2 with Rounded Bottom [Boat Stud] × 4![Plate Round 2 × 2 with Rounded Bottom [Boat Stud] Blue](/media/parts/2654/1/plate-round-2-x-2-with-rounded-bottom-boat-stud-blue.jpg)
-
Brick 2 × 4 × 4
-
Brick 2 × 3 × 4
-
Plate 2 × 2 × 4
-
Brick Sloped 45° 2 × 1 with Bottom Pin × 4
-
Plate 1 × 3 × 4
-
Seat / Chair 2 × 2 with Center Sprue Mark × 4
-
Plate 1 × 10 × 4
-
Cone 1 × 1 [Top Groove] × 4![Cone 1 × 1 [Top Groove] Light Bluish Gray](/media/parts/59900/71/cone-1-x-1-top-groove-light-bluish-gray.jpg)
-
Wheel 11 × 12 with Hole Notched for Wheels Holder Pin × 4
-
Brick 1 × 12 × 4
-
Plate Round 1 × 1 with Solid Stud × 4
-
Plate Round 1 × 1 with Solid Stud × 4
-
Technic Beam 1 × 7 Bent (4 - 4) Thick No longer produced · last seen 2022 × 4
-
Tyre 21 × 12 with Offset Tread Small Wide and Beveled Tread Edge No longer produced · last seen 2013 × 4
-
Tile Special 1 × 2 Grille with Bottom Groove × 3
-
Plate Special 1 × 2 Side Handle [Free Ends] × 3![Plate Special 1 × 2 Side Handle [Free Ends] Red](/media/parts/2540/4/plate-special-1-x-2-side-handle-free-ends-red.jpg)
-
Plate 2 × 4 × 3
-
Plate 1 × 8 × 3
-
Technic Bush × 3
-
Plate 2 × 6 × 3
-
Equipment Binoculars × 3
-
Plate Special 8 × 8 with Grille [Hole in Center] No longer produced · last seen 2024 × 3![Plate Special 8 × 8 with Grille [Hole in Center] Dark Bluish Gray](/media/parts/4151b/72/plate-special-8-x-8-with-grille-hole-in-center-dark-bluish-gray.jpg)
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 3
-
Tile Special 1 × 2 with Handle × 2
-
Tile Special 1 × 2 with Handle × 2
-
Minifig Neckwear Life Jacket [Old Style] No longer produced · last seen 2011 × 2![Minifig Neckwear Life Jacket [Old Style] Yellow](/media/parts/2610/14/minifig-neckwear-life-jacket-old-style-yellow.jpg)
-
Brick 2 × 2 × 2
-
Brick 1 × 8 × 2
-
Brick 1 × 6 × 2
-
Brick 1 × 4 × 2
-
Plate 2 × 4 × 2
-
Plate 2 × 4 × 2
-
Plate 1 × 2 × 2
-
Plate 1 × 2 × 2
-
Plate 1 × 2 × 2
-
Plate 2 × 8 × 2
-
Plate 6 × 8 × 2
-
Brick Sloped 45° 2 × 2 × 2
-
Brick Round 1 × 1 Open Stud × 2
-
Tile 1 × 2 with Groove × 2
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced × 2
-
Brick 1 × 2 × 2 with Inside Stud Holder × 2
-
Brick 1 × 3 × 2
-
Brick Sloped Inverted 45° 2 × 1 × 2
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (13)
These extra parts come with the set in case one gets lost.
-
Plate Round 1 × 1 with Solid Stud × 2
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 2
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 2
-
Headwear Accessory Visor For Standard Helmet No longer produced · last seen 2023 × 1
-
Lever Small Base with Black Lever × 1
-
Arm Mechanical with 2 Clips [Battle Droid] × 1![Arm Mechanical with 2 Clips [Battle Droid] Light Bluish Gray](/media/parts/30377/71/arm-mechanical-with-2-clips-battle-droid-light-bluish-gray.jpg)
-
Tile 1 × 1 with White and Red Gauge Print No longer produced · last seen 2022 × 1
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced × 1
-
Technic Bush × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
Minifigures 3
Alternative models
Fan models by Rebrickable users that you can build (mostly) from this set’s parts. Instructions are available from the designers.
View the idea at Rebrickable ↗
What can I build with it?Description
Two vehicles in one box
What sets this one apart is the double role: one vehicle for land and rough ground, a second for the water. Both belong to the same rescue scenario, so stories can move between the shore, the track and the fire itself. With 388 pieces the material is split between two models, which makes each of them fairly compact. If you want different kinds of emergency response in one set, there is plenty of play value here without an overly long build. The off-road truck and the boat can also be displayed or played with separately, depending on what you need at the moment.
Red on grey
Dark grey and light grey form the backdrop, while red and white add the typical fire service accents. Red vehicle parts are instantly recognisable as emergency equipment and stand out well against the grey elements. With 122 different parts the variety is high, which points to plenty of small details across both vehicles. That makes the parts list on this page especially handy when you want to check a second-hand set for completeness. A missing small part that would cause trouble during the build is spotted quickly that way.
Three figures, lots of room to play
Three minifigures come in the box, enough to crew both vehicles and stage a small rescue. The City Fire theme appeals above all to children who like acting out emergencies. It is less of a display model, but it slots neatly into an existing town where a fire station, roads or a harbour are already standing and a suitable vehicle is still missing. With a crew on the boat and a squad in the truck, a scene with several locations at once takes shape quickly.
Building on with the parts
The “What can I build?” tool tells you which other models you can make from this set's bricks together with your collection. The mix of grey, red and white parts suits rescue vehicles, industrial buildings and boats alike. That keeps the set useful long after the first build and lets you combine its pieces in new ways again and again. Anyone with several fire sets can assemble a whole station with a fleet and a waterside rescue service.
FAQ
- What is in the set?
- An off-road fire truck and a fireboat, together 388 pieces and 3 minifigures.
- Which range does it belong to?
- It belongs to the City Fire range and was released in 2010.
- How many different parts are there?
- There are 122 different parts. You can find the full list at the top of the page.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



