
LEGO® Propeller Adventures
Propeller Adventures is a 2012 Creator 3-in-1 set with 241 pieces and no minifigures. The same bricks make several models, so the building itself takes centre stage.
- Set number
- 7292
- Year
- 2012
- Pieces
- 241
- Minifigures
- 0
- Theme
- Creator 3-in-1
- Different parts
- 84
Parts list 84
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced × 12
-
Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] No longer produced · last seen 2022 × 11![Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] Light Bluish Gray](/media/parts/3660/71/brick-sloped-inverted-45-2-x-2-ovoid-bottom-pin-bar-sized-stud-holes-light-bluish-gray.jpg)
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 8
-
Tile 1 × 3 × 8
-
Brick Sloped 30° 1 × 2 × 2/3 × 8
-
Plate 1 × 6 × 7
-
Plate 1 × 2 × 6
-
Tile 1 × 1 with Groove × 6
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced × 6
-
Plate 1 × 3 × 6
-
Plate Special 1 × 4 with 2 Studs, 3 Bottom Tubes No longer produced · last seen 2020 × 6
-
Plate Special 1 × 2 with 1 Stud with Groove (Jumper) No longer produced · last seen 2014 × 5
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 5
-
Bracket 1 × 2 - 1 × 4 [Square Corners] No longer produced · last seen 2013 × 4![Bracket 1 × 2 - 1 × 4 [Square Corners] Light Bluish Gray](/media/parts/2436/71/bracket-1-x-2-1-x-4-square-corners-light-bluish-gray.jpg)
-
Plate 2 × 3 × 4
-
Plate 2 × 2 × 4
-
Plate 1 × 2 × 4
-
Technic Brick 1 × 2 [1 Pin Hole] × 4![Technic Brick 1 × 2 [1 Pin Hole] Black](/media/parts/3700/0/technic-brick-1-x-2-1-pin-hole-black.jpg)
-
Plate 1 × 4 × 4
-
Brick Sloped Inverted 45° 4 × 2 Double with 2 × 2 Recessed × 4
-
Brick Curved 1 × 2 × 1 1/3 with Curved Top × 4
-
Technic Brick 1 × 2 [2 Pin Holes] × 4![Technic Brick 1 × 2 [2 Pin Holes] Light Bluish Gray](/media/parts/32000/71/technic-brick-1-x-2-2-pin-holes-light-bluish-gray.jpg)
-
Technic Axle Pin with Friction Ridges Lengthwise × 4
-
Brick Sloped 18° 2 × 1 × 2/3 with 4 Slots / Grate × 4
-
Brick Special 1 × 1 with Stud on 1 Side × 4
-
Brick 1 × 2 × 3
-
Plate 1 × 4 × 3
-
Plate Round 1 × 1 with Solid Stud × 3
-
Wedge Plate 4 × 9 without Stud Notches No longer produced · last seen 2012 × 2
-
Plate 2 × 2 Corner × 2
-
Tile 1 × 4 with Groove × 2
-
Plate 2 × 12 × 2
-
Technic Axle Towball × 2
-
Technic Pin with Friction Ridges Lengthwise and Center Slots No longer produced · last seen 2021 × 2
-
Technic Beam 1 × 4 Thin with Stud Connector × 2
-
Brick 1 × 8 × 2
-
Plate 2 × 4 × 2
-
Plate 2 × 4 × 2
-
Plate 2 × 3 × 2
-
Technic Axle Pin without Friction Ridges Lengthwise × 2
-
Plate 2 × 6 × 2
-
Plate Round 1 × 1 with Solid Stud × 2
-
Plate Round 1 × 1 with Solid Stud × 2
-
Tile 1 × 6 with Groove × 2
-
Brick Curved 10 × 1 [Symmetric Inside Ridges] × 2![Brick Curved 10 × 1 [Symmetric Inside Ridges] Red](/media/parts/13731/4/brick-curved-10-x-1-symmetric-inside-ridges-red.jpg)
-
Tile Special 1 × 2 Grille with Bottom Groove × 2
-
Brick Special 1 × 4 with 4 Studs on One Side × 2
-
Wedge Plate 4 × 4 Cut Corner × 2
-
Brick Curved 2 × 2 with Lip, No Studs × 2
-
Technic Plate Rotor 3 Blade with Smooth Ends and 6 Studs (Propeller) No longer produced · last seen 2020 × 2
-
Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole × 2
-
Technic Cylinder 4 × 4 with Pin Holes and Centre Bar, Closed Sides on Bar × 2
-
Brick Curved Inverted 6 × 1 No longer produced · last seen 2020 × 2
-
Wheel 11 × 8 with Center Groove × 2
-
Brick Sloped Inverted 34° 3 × 1 with Internal Stopper No longer produced · last seen 2019 × 2
-
Brick Curved 2 × 2 No Studs - 3 Recessed Side Ports No longer produced · last seen 2013 × 2
-
Brick Curved 3 × 1 No Studs × 2
-
Tyre 14 × 6 Solid Smooth × 2
-
Wedge Plate 2 × 4 × 2
-
Technic Axle Connector Hub with 3 Axles at 120° × 2
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (9)
These extra parts come with the set in case one gets lost.
-
Technic Pin with Friction Ridges Lengthwise and Center Slots No longer produced · last seen 2021 × 1
-
Tile 1 × 1 with Groove × 1
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced × 1
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
Alternative models
A 3-in-1 set: the official LEGO® building instructions contain three models you can build from the same parts. View the official building instructions at LEGO® ↗
Fan models by Rebrickable users that you can build (mostly) from this set’s parts. Instructions are available from the designers.
- 7292 Asian Sailboat
- 7292d P-38 Lightning
- 7292 Mustang
- 7292 BomberMaster
- (7292) A 10 Warthog
- Urban Byplane
Description
One box, several models
Creator 3-in-1 rests on a simple idea: the same parts make three different models. Once you finish one, you can take it apart and build something new from the same bricks. That gives a 241-piece set far more playtime than the number suggests. The name points to propeller-driven aircraft. The first model is only the start, as the instructions take you through variants that differ in shape and size.
Light grey, red and black
Light bluish grey dominates, with red, black and white alongside it. It is a classic mix for technical models in which fuselage, wings and details stay easy to tell apart. The 73 different parts among 241 pieces show that the box holds more than plain bricks, which makes the set a good pool for your own constructions. Technical models need clear contrasts, and this colour choice delivers them: wings, fuselage and tail stand out visibly from each other. That allows not only aircraft but also vehicles and small machines with clean lines.
Playing without figures
No minifigures are included. The set therefore suits anyone who cares more about constructing than about a ready-made story. You can add pilots from your own collection or simply display the models. For children it is also a gentle way into free building, since the instructions already show several variations. That keeps the set interesting even without figures, and it is easy to add collectables of your own. It is a set that rewards patience and curiosity.
Building on from the parts list
The complete parts list with colours is on this page. With “What can I build?” you can see which extra models come out of your bricks plus this set. In a 3-in-1 set that is especially worth a look, since the parts are designed to serve several constructions anyway. Children who invent their own aircraft in particular benefit from the choice of wing and fuselage elements. A single box thus becomes a versatile stock that carries several building projects one after another.
FAQ
- How many pieces does it have, and are there minifigures?
- It has 241 pieces, 73 of them unique. No minifigures are included.
- What does 3-in-1 mean?
- The same parts can be built into three different models, one after another, following the instructions.
- Which colours dominate?
- Light bluish grey, red, black and white.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



