
Droid Gunship
The Droid Gunship belongs to the Separatist fleet from the prequel films and the Clone Wars, bringing a heavily armed warship to brick form in 2014. 439 pieces and 4 minifigures build a compact ship with a distinctive hull and moving parts. Grey tones dominate the shell, while dark blue appears as a rare fourth accent colour.
- Set number
- 75042
- Year
- 2014
- Pieces
- 439
- Minifigures
- 4
- Theme
- Star Wars
- Different parts
- 130
Parts list 130
-
Technic Axle Connector Smooth [with x Hole + Orientation]
× 14
-
Tile Special 1 × 2 Grille with Bottom Groove
× 11
-
Technic Axle 2 Notched
× 11
-
Brick Curved 4 × 2 No Studs
× 11
-
Plate Round 1 × 1 with Solid Stud
× 10
-
Technic Pin with Friction Ridges Lengthwise and Center Slots
No longer produced · last seen 2021
× 8
-
Tile 1 × 2 with Groove
× 8
-
Plate Special 1 × 2 with 1 Stud with Groove (Jumper)
No longer produced · last seen 2015
× 8
-
Technic Beam 1 × 2 Thick with Pin Hole and Axle Hole
× 8
-
Brick Sloped 45° 2 × 1 with 2/3 Cutout [Original Version]
No longer produced · last seen 2014
× 8
-
Plate 1 × 2
× 7
-
Plate 2 × 2 Corner
× 6
-
Wedge Plate 3 × 3 Cut Corner
× 6
-
Plate 4 × 4 Corner
× 6
-
Plate 2 × 3
× 6
-
Technic Plate 2 × 4 [3 Holes]
× 6
-
Brick Special 1 × 1 with Headlight
× 6
-
Technic Axle 3
× 6
-
Technic Brick 1 × 2 [2 Pin Holes]
× 6
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced
× 6
-
Technic Beam 1 × 3 Thick
× 6
-
Cone 1 × 1 [Top Groove]
× 6
-
Plate Special 1 × 2 with Handle on End [Closed Ends]
× 6
-
Technic Axle 4 with Stop
× 6
-
Plate 1 × 4
× 5
-
Bracket 1 × 2 - 2 × 2
× 5
-
Brick 1 × 6
× 4
-
Plate 2 × 4
× 4
-
Brick Curved 2 × 1 No Studs [1/2 Bow]
× 4
-
Bar 4L (Lightsaber Blade / Wand)
× 4
-
Hinge Brick 2 × 2 Locking with 1 Finger Vertical and Axle Hole [+ Opening]
No longer produced · last seen 2024
× 4
-
Plate 1 × 8
× 4
-
Brick 1 × 3
× 4
-
Plate 2 × 6
× 4
-
Plate 2 × 10
× 4
-
Plate Round Corner 4 × 4
× 4
-
Tile 1 × 2 with Groove
× 4
-
Technic Axle 5
× 4
-
Technic Beam 1 × 7 Thick
× 4
-
Technic Beam 1 × 2 Thin
× 4
-
Dome Hemisphere 3 × 3 Ball Turret
× 4
-
Hinge Plate 1 × 2 Locking with 1 Finger on Side, with Groove
No longer produced · last seen 2020
× 4
-
Tile 1 × 6 with Groove
× 4
-
Hinge Plate 3 × 4 Locking Dual 2 Finger, 9 Teeth
No longer produced · last seen 2020
× 4
-
Brick Round Corner 10 × 10 with Slope 33° Edge, Axle Hole, Facet Cutout
No longer produced · last seen 2021
× 4
-
Plate Special 1 × 2 with Clip Horizontal on End
× 4
-
Brick Curved 4 × 1 Double with No Studs
× 4
-
Bracket 1 × 2 - 2 × 4
× 4
-
Brick Round Corner 6 × 6 with 33° Slope and Facet Cutout
× 4
-
Plate 2 × 4
× 3
-
Plate 4 × 10
× 3
-
Plate Special 4 × 6 with Studs on 3 Edges
× 3
-
Tile 1 × 6 with Groove
× 3
-
Brick Curved 4 × 1 No Studs [Stud Holder with Symmetric Ridges]
× 3
-
Projectile, Spring Shooter Ammunition 8L Bar
× 3
-
Wedge Plate 4 × 2 Right
× 3
-
Wedge Plate 4 × 2 Left
× 3
-
Bar 6L with Stop Ring
× 3
-
Plate Round 2 × 2 with Rounded Bottom [Boat Stud]
× 2
-
Brick 1 × 8
× 2
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (8)
These extra parts come with the set in case one gets lost.
-
Technic Pin with Friction Ridges Lengthwise and Center Slots
No longer produced · last seen 2021
× 2
-
Plate Round 1 × 1 with Solid Stud
× 2
-
Plate 1 × 1
× 1
-
Arm Mechanical with 2 Clips [Battle Droid]
× 1
-
Tile 1 × 1 with Groove
× 1
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced
× 1
-
Technic Pin without Friction Ridges Lengthwise
× 1
-
Arm Mechanical Straight (Droid) [2 Clips at 90°]
× 1
Minifigures 4
Description
A Separatist warship
The Droid Gunship, also known in the source material as a heavy missile platform, belongs to the Separatist fleet of the Clone Wars era and fights there against Jedi and clone troopers. The model recreates the ship's wide, distinctive hull along with the characteristic claw arms at the front, which in the original are used to grab objects. Rotating turrets and a cockpit for the droid pilots complete the build. At 439 pieces the ship stays compact while still capturing its key silhouette clearly. Fans of the Clone Wars era will find a vehicle that rarely gets its own set.
Grey and dark blue as a signature look
Light Bluish Grey and Dark Bluish Grey make up most of the hull, giving the ship a metallic, slightly bulky appearance. Black picks out edges and the engine section, while dark blue stands out as a distinctive fourth colour on details such as the cockpit area. This colour combination sets the Gunship clearly apart from the browner or redder tones used on other Separatist vehicles. The parts list on this page shows exactly how the 130 unique parts split across these four colours.
Four minifigures from the Clone Wars
With 4 minifigures, the set covers typical roles from the Clone Wars era, from droid pilots to opposing characters. The cast fits neatly into a larger Star Wars collection or into original scenes between the Republic and the Separatists. Anyone who follows The Clone Wars series will instantly recognise the Gunship from numerous battle scenes. Thanks to a compact build of 439 pieces, the model comes together quickly and is ready for the shelf or for role play.
Parts for more Separatist vehicles
130 unique parts provide solid material for building other Separatist-style vehicles, particularly in the ship's signature grey tones. Claw arms, turret elements and specialist parts from the cockpit section combine well with other Clone Wars sets. The full parts list on this page lists every element by colour and quantity, making individual pieces easy to track down. That turns the Gunship into a starting point for a growing Clone Wars era fleet.
FAQ
- How many pieces does the Droid Gunship have?
- Set 75042 has 439 pieces, including 130 unique elements.
- How many minifigures come with the set?
- The set includes 4 minifigures from the Clone Wars era.
- What colours dominate the model?
- Light Bluish Grey and Dark Bluish Grey define the hull, with black and dark blue as accents.



