
LEGO® General Grievous' Combat Speeder
Four-armed, part machine and armed with stolen lightsabers, General Grievous is one of the most distinctive villains of the Clone Wars era. Set 75199 from 2018 gives him a speeder built from 157 pieces, with two minifigures included.
- Set number
- 75199
- Year
- 2018
- Pieces
- 157
- Minifigures
- 2
- Theme
- Star Wars
- Different parts
- 69
Parts list 69
-
Plate Round 2 × 2 with Rounded Bottom [Boat Stud] × 6![Plate Round 2 × 2 with Rounded Bottom [Boat Stud] Trans-Clear](/media/parts/2654/47/plate-round-2-x-2-with-rounded-bottom-boat-stud-trans-clear.jpg)
-
Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots No longer produced · last seen 2021 × 6
-
Brick Curved 2 × 1 No Studs [1/2 Bow] × 6![Brick Curved 2 × 1 No Studs [1/2 Bow] Light Bluish Gray](/media/parts/11477/71/brick-curved-2-x-1-no-studs-12-bow-light-bluish-gray.jpg)
-
Weapon Lightsaber Hilt with Bottom Ring × 5
-
Technic Pin with Friction Ridges Lengthwise and Center Slots No longer produced · last seen 2021 × 4
-
Plate 1 × 1 × 4
-
Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] × 4![Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] Dark Bluish Gray](/media/parts/3660/72/brick-sloped-inverted-45-2-x-2-ovoid-bottom-pin-bar-sized-stud-holes-dark-bluish-gray.jpg)
-
Technic Plate 2 × 4 [3 Holes] × 4![Technic Plate 2 × 4 [3 Holes] Light Bluish Gray](/media/parts/3709/71/technic-plate-2-x-4-3-holes-light-bluish-gray.jpg)
-
Bracket 1 × 2 - 1 × 4 [Rounded Corners] No longer produced · last seen 2019 × 4![Bracket 1 × 2 - 1 × 4 [Rounded Corners] Light Bluish Gray](/media/parts/10201/71/bracket-1-x-2-1-x-4-rounded-corners-light-bluish-gray.jpg)
-
Technic Brick 1 × 2 [2 Pin Holes] × 4![Technic Brick 1 × 2 [2 Pin Holes] Light Bluish Gray](/media/parts/32000/71/technic-brick-1-x-2-2-pin-holes-light-bluish-gray.jpg)
-
Brick Round Corner 6 × 6 with 33° Slope and Facet Cutout No longer produced · last seen 2019 × 4
-
Bracket 1 × 2 - 1 × 2 Inverted × 4
-
Projectile, Spring Shooter Ammunition 8L Bar × 3
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) × 3
-
Plate Round 2 × 2 with Axle Hole Type 1 (+ Opening) × 3
-
Plate 2 × 2 Corner × 2
-
Lever Small Base with Black Lever × 2
-
Brick 2 × 4 × 2
-
Brick 2 × 4 × 2
-
Brick 1 × 4 × 2
-
Plate 2 × 3 × 2
-
Plate 4 × 8 × 2
-
Technic Brick 1 × 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin × 2![Technic Brick 1 × 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin Dark Bluish Gray](/media/parts/32064a/72/technic-brick-1-x-2-with-axle-hole-type-1-opening-and-bottom-pin-dark-bluish-gray.jpg)
-
Brick Sloped 33° 3 × 2 No longer produced · last seen 2024 × 2
-
Plate 1 × 3 × 2
-
Technic Brick 1 × 4 [3 Pin Holes] × 2![Technic Brick 1 × 4 [3 Pin Holes] White](/media/parts/3701/15/technic-brick-1-x-4-3-pin-holes-white.jpg)
-
Plate 1 × 4 × 2
-
Technic Axle 3 × 2
-
Launcher, Brick Special 1 × 4 Spring Shooter with Light Bluish Gray Top × 2
-
Tile Special 1 × 1 with Clip with Rounded Edges × 2
-
Wedge Plate 2 × 2 Cut Corner × 2
-
Bar 4L (Lightsaber Blade / Wand) × 2
-
Bar 4L (Lightsaber Blade / Wand) × 2
-
Plate Round Corner 4 × 4 × 2
-
Plate Round Corner 4 × 4 × 2
-
Technic Axle and Pin Connector Angled #5 - 112.5° × 2
-
Technic Beam 1 × 9 Thick × 2
-
Wedge Plate 4 × 2 Right × 2
-
Wedge Plate 4 × 2 Left × 2
-
Plate Special 1 × 1 with Clip Horizontal [Thick Open O Clip] × 2![Plate Special 1 × 1 with Clip Horizontal [Thick Open O Clip] Black](/media/parts/61252/0/plate-special-1-x-1-with-clip-horizontal-thick-open-o-clip-black.jpg)
-
Plate Special 1 × 2 with Clip Horizontal on End × 2
-
Tile 2 × 4 with Groove × 2
-
Weapon Pike / Spear Flat End × 2
-
Brick 1 × 2 × 1
-
Plate 2 × 2 × 1
-
Plate 4 × 6 × 1
-
Wheel Hard Plastic Small (22mm D. x 24mm) No longer produced · last seen 2020 × 1
-
Cone 3 × 3 × 2 No longer produced · last seen 2024 × 1
-
Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) × 1
-
Tile Round 2 × 2 with Bottom Stud Holder × 1
-
Technic Axle 11 × 1
-
Bar 4L (Lightsaber Blade / Wand) × 1
-
Technic Plate 2 × 6 [5 Holes] × 1![Technic Plate 2 × 6 [5 Holes] Black](/media/parts/32001/0/technic-plate-2-x-6-5-holes-black.jpg)
-
Technic Axle 5 × 1
-
Sticker Sheet for Set 75199-1 No longer produced · last seen 2018 × 1![Sticker Sheet for Set 75199-1 [No Color/Any Color]](/media/parts/36396/9999/sticker-sheet-for-set-75199-1-no-colorany-color.jpg)
-
Plate Special 1 × 2 with Handles [Flat Ends / Low Attachment] × 1![Plate Special 1 × 2 with Handles [Flat Ends / Low Attachment] Light Bluish Gray](/media/parts/3839b/71/plate-special-1-x-2-with-handles-flat-ends-low-attachment-light-bluish-gray.jpg)
-
Cone 2 × 2 × 2, Open Stud × 1
-
Plate Special 1 × 1 with Clip Light, Bar Hole [Thick Ring] × 1![Plate Special 1 × 1 with Clip Light, Bar Hole [Thick Ring] Dark Bluish Gray](/media/parts/4081b/72/plate-special-1-x-1-with-clip-light-bar-hole-thick-ring-dark-bluish-gray.jpg)
-
Technic Cylinder 4 × 4 with Pin Holes and Centre Bar, Closed Sides on Bar × 1
-
Technic Cylinder 4 × 4 with Pin Holes and Centre Bar, Closed Sides on Bar No longer produced · last seen 2024 × 1
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (6)
These extra parts come with the set in case one gets lost.
-
Weapon Lightsaber Hilt with Bottom Ring × 2
-
Technic Pin with Friction Ridges Lengthwise and Center Slots No longer produced · last seen 2021 × 1
-
Lever Small Base with Black Lever × 1
-
Plate 1 × 1 × 1
-
Arm Mechanical [2 Clips at 90°] with White Print on Right × 1![Arm Mechanical [2 Clips at 90°] with White Print on Right Dark Bluish Gray](/media/parts/87568pr0001/72/arm-mechanical-2-clips-at-90-with-white-print-on-right-dark-bluish-gray.jpg)
-
Arm Mechanical [2 Clips at 90°] with White Pattern on Left × 1![Arm Mechanical [2 Clips at 90°] with White Pattern on Left Dark Bluish Gray](/media/parts/87568pr0002/72/arm-mechanical-2-clips-at-90-with-white-pattern-on-left-dark-bluish-gray.jpg)
Minifigures 2
Alternative models
Fan models by Rebrickable users that you can build (mostly) from this set’s parts. Instructions are available from the designers.
- Grievous´Combat Throne, Minifig Display
- republic turbolaser
- jedi siege tank
- mini millenium falcon
- Mini Millennium Falcon for bunnies
Description
A general who hunts Jedi
Grievous commands the Separatist droid armies during the Clone Wars. He is a cyborg with a cough, a cape and a collection of lightsabers taken from fallen Jedi. In Revenge of the Sith, Obi-Wan Kenobi finally confronts him on Utapau, while The Clone Wars animated series brings him back again and again as a foe for the Republic. Putting him on his own vehicle gives any Separatist line-up an obvious leader, one who looks nothing like the rows of battle droids behind him.
Ready for a chase
Two minifigures and one speeder make a neat starting point for a pursuit or a duel. The build is quick, so the set moves from box to play in a single sitting, which suits younger fans. At the same time, it looks tidy enough to stand beside other prequel-era models. Add clone troopers or Jedi from your collection and the scene grows naturally into a larger battle between the Republic and the Separatists.
More variety than the size suggests
The 157 pieces include 69 unique elements, which means nearly every other part is a different shape or colour. That keeps the building steps fresh and gives you a varied pick of parts afterwards. Light bluish grey and dark bluish grey form the base, with dark blue and black for contrast. When checking a second-hand copy, the parts list on this page shows every element with its colour and quantity, so missing pieces stand out quickly.
Parts for your own designs
Greys, dark blue and black sit comfortably in almost any sci-fi build, from small speeders to larger stations. Because the set contains so many different elements, it makes a useful parts pack once the original model comes apart. To see which other sets your current collection could already produce, open What can I build? on this page. It also lists models that are only a few pieces short, so you can plan additions sensibly.
FAQ
- In which film does General Grievous appear?
- He appears in Revenge of the Sith and plays a major role in The Clone Wars animated series.
- How many pieces and figures are in set 75199?
- The set has 157 pieces and two minifigures.
- What are the main colours?
- Light bluish grey and dark bluish grey dominate, supported by dark blue and black.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



