
Imperial Light Cruiser
The Imperial Light Cruiser (75315) is a 1,336-piece Star Wars set bringing a wedge-shaped Imperial ship from "The Mandalorian" to the shelf. Six minifigures make the ship playable straight away. This page lists all 267 unique parts and the colour palette used in the model.
- Set number
- 75315
- Year
- 2021
- Pieces
- 1,336
- Minifigures
- 6
- Theme
- Star Wars
- Different parts
- 267
Parts list 267
-
Technic Pin with Friction Ridges Lengthwise with No Center Slots
× 54
-
Tile Special 1 × 2 Grille with Bottom Groove
× 46
-
Technic Pin 1/2 without Friction Ridges
× 42
-
Plate 1 × 2
× 35
-
Plate 1 × 4
× 20
-
Plate 2 × 6
× 18
-
Brick Curved Inverted 4 × 1
× 16
-
Plate Special 1 × 2 with Door Rail
× 16
-
Plate 2 × 3
× 14
-
Plate Round 1 × 1 with Solid Stud
× 14
-
Plate Special 1 × 2 Rounded with 2 Open Studs
× 14
-
Bracket 1 × 2 - 1 × 2 Inverted
× 14
-
Plate Round 1 × 1 with Solid Stud
× 12
-
Plate Special 2 × 2 with 1 Pin Hole [Complete Underside Rib]
× 12
-
Brick Sloped 45° 2 × 1 with Bottom Pin
× 12
-
Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot
× 12
-
Plate Special 1 × 2 with Handle on End [Closed Ends]
× 12
-
Brick Round Corner 3 × 3 × 1 No Studs
× 12
-
Plate Round 1 × 1 with Open Stud
× 12
-
Brick Sloped 30° 1 × 2 × 2/3
× 12
-
Bracket 1 × 2 - 1 × 2
× 12
-
Tile Special 1 × 2 Grille with Bottom Groove
× 11
-
Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]
No longer produced · last seen 2022
× 11
-
Plate 2 × 6
× 11
-
Plate 2 × 8
× 10
-
Tile 1 × 6 with Groove
× 10
-
Wedge Plate 2 × 2 Cut Corner
× 10
-
Wedge Plate 4 × 4 Cut Corner
× 10
-
Wedge Plate 8 × 8 Cut Corner
× 10
-
Technic Brick 5 × 5 Right Angle (1 × 4 - 1 × 4)
× 10
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 10
-
Plate 2 × 4
× 9
-
Technic Brick 1 × 16 [15 Pin Holes]
× 9
-
Plate Round 1 × 1 with Solid Stud
× 9
-
Plate Special 2 × 2 with Only 2 studs
× 9
-
Brick 1 × 4
× 8
-
Plate 1 × 2
× 8
-
Plate 2 × 16
× 8
-
Bar Holder with Clip
× 8
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
× 8
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
× 8
-
Tile Special 1 × 1 with Clip with Rounded Edges
× 8
-
Brick Special 1 × 2 × 1 2/3 with 4 Studs on 1 Side
× 8
-
Tile 1 × 2 with Groove
× 8
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced
× 8
-
Hinge Plate 1 × 2 Locking with 1 Finger On End, without Groove
× 8
-
Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip]
No longer produced · last seen 2023
× 8
-
Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [2 Lateral Holes, Small Pin Hole]
× 8
-
Hinge Plate 1 × 4 Swivel Top / Base - Solid Clip [Complete Assembly]
No longer produced · last seen 2024
× 8
-
Bar 3L
× 8
-
Plate 2 × 3
× 7
-
Technic Axle 2 Notched
× 7
-
Wedge Plate 6 × 3 Right
× 7
-
Wedge Plate 6 × 3 Left
× 7
-
Tile 1 × 4 with Groove
× 6
-
Brick Wedged 3 × 3 Facet
× 6
-
Brick Special 1 × 2 with Grille
× 6
-
Brick 2 × 4
× 6
-
Brick 2 × 2
× 6
-
Plate 2 × 4
× 6
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (17)
These extra parts come with the set in case one gets lost.
-
Technic Pin with Friction Ridges Lengthwise with No Center Slots
× 2
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced
× 1
-
Technic Pin 1/2 without Friction Ridges
× 1
-
Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip]
No longer produced · last seen 2024
× 1
-
Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip]
No longer produced · last seen 2023
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 1
-
Weapon Lightsaber Hilt with Bottom Ring
× 1
-
Weapon Lightsaber Hilt with Bottom Ring
× 1
-
Weapon Lightsaber Hilt with Bottom Ring
× 1
-
Plate Round 1 × 1 with Open Stud
× 1
-
Bar 3L
× 1
-
Tile Round 1 × 1
× 1
-
Tile Round 1 × 1 with Thermal Detonator Print
× 1
-
Tile Round 1 × 1 with Dark Bluish Grey Cockpit print
No longer produced · last seen 2022
× 1
Minifigures 6
Description
A smaller ship in the Imperial fleet
The Imperial Light Cruiser follows the classic wedge shape of Imperial vessels, but is noticeably more compact than the theme's large Star Destroyer sets. The ship became known through its appearance in "The Mandalorian", where it's used as a pursuit vessel. For shelves with limited space, that smaller scale is appealing, since it still captures the familiar Imperial silhouette without needing the room a large Star Destroyer model demands. Interior areas such as a command bridge mean the model offers detail beyond just its exterior.
Six minifigures for crew and opponents
With six minifigures, the set covers both Imperial crew members and opposing characters from the show, allowing small pursuit or conflict scenes to be recreated straight away. That's a generous figure count for a ship this size and makes the set appealing to collectors gathering characters from "The Mandalorian" specifically. Children familiar with the show can act out their own scenes right away, without needing to rely on additional sets.
Grey tones with an Imperial blue accent
Light bluish grey and dark bluish grey make up most of the hull, matching the stark, military look typical of Imperial vehicles. Black appears on engines and technical details, while blue provides small accents, such as on thruster elements or markings. That restrained palette is characteristic of Imperial ships across the Star Wars universe and sets the model apart from the earthier tones used on many Rebel vehicles. The exact colour breakdown is shown in the parts list further down this page.
267 parts for the hull and interior
267 unique shapes out of 1,336 pieces give enough variety to recreate both the ship's distinctive wedge-shaped hull and interior details such as the command bridge. That mix is particularly appealing for builders who enjoy spaceship models with a walkable interior, since it goes beyond parts built purely for an exterior shell. The build alternates between large hull panels and smaller interior details, keeping the process more varied than exterior-only models.
FAQ
- Which Star Wars show is the Imperial Light Cruiser from?
- The ship became well known through its appearance in "The Mandalorian", where it serves as a pursuit vessel for the Imperial fleet.
- How many pieces and minifigures does the set have?
- The set includes 1,336 pieces, of which 267 are unique parts, plus six minifigures.
- What colours define the model?
- Light bluish grey and dark bluish grey form the hull, joined by black on the engines and small blue accents.



