
LEGO® Ford Fiesta M-Sport WRC
Set 75885 Ford Fiesta M-Sport WRC is part of the LEGO® Speed Champions range, recreating the real M-Sport rally car in miniature form. With 206 pieces and one minifigure, it's a compact vehicle build complete with a driver.
- Set number
- 75885
- Year
- 2018
- Pieces
- 206
- Minifigures
- 1
- Theme
- Speed Champions
- Different parts
- 84
Parts list 84
-
Plate Round 1 × 1 with Solid Stud × 12
-
Brick Curved 2 × 1 No Studs [1/2 Bow] × 8![Brick Curved 2 × 1 No Studs [1/2 Bow] Dark Blue](/media/parts/11477/272/brick-curved-2-x-1-no-studs-12-bow-dark-blue.jpg)
-
Bracket 1 × 2 - 2 × 2 Inverted × 7
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) × 6
-
Plate Round 2 × 2 with Rounded Bottom [Boat Stud] × 5![Plate Round 2 × 2 with Rounded Bottom [Boat Stud] Black](/media/parts/2654/0/plate-round-2-x-2-with-rounded-bottom-boat-stud-black.jpg)
-
Tile 1 × 2 with Groove × 5
-
Plate Round 1 × 1 with Solid Stud × 5
-
Wheel Cover 10 Spoke - for Wheel 18976 No longer produced · last seen 2019 × 4
-
Plate 2 × 2 × 4
-
Plate 1 × 2 × 4
-
Plate 1 × 2 × 4
-
Plate 1 × 1 × 4
-
Plate 1 × 3 × 4
-
Technic Axle Pin without Friction Ridges Lengthwise × 4
-
Brick Curved 4 × 1 No Studs [Stud Holder with Symmetric Ridges] × 4![Brick Curved 4 × 1 No Studs [Stud Holder with Symmetric Ridges] Dark Blue](/media/parts/11153/272/brick-curved-4-x-1-no-studs-stud-holder-with-symmetric-ridges-dark-blue.jpg)
-
Wheel 18 × 12 with Axle Hole and Stud No longer produced · last seen 2018 × 4
-
Tyre 24 × 12 Low Profile × 4
-
Plate Special 2 × 2 with Only 2 Studs × 4
-
Plate Special 2 × 2 × 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud] × 4![Plate Special 2 × 2 × 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud] Black](/media/parts/99206/0/plate-special-2-x-2-x-23-with-two-studs-on-side-and-two-raised-solid-anti-stud-black.jpg)
-
Bracket 1 × 2 - 1 × 2 × 4
-
Brick Curved 2 × 1 No Studs [1/2 Bow] × 3![Brick Curved 2 × 1 No Studs [1/2 Bow] Black](/media/parts/11477/0/brick-curved-2-x-1-no-studs-12-bow-black.jpg)
-
Plate Special 2 × 2 × 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud] No longer produced · last seen 2023 × 3![Plate Special 2 × 2 × 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud] Light Bluish Gray](/media/parts/99206/71/plate-special-2-x-2-x-23-with-two-studs-on-side-and-two-raised-solid-anti-stud-light-bluish-gray.jpg)
-
Plate 2 × 2 Corner × 2
-
Brick 1 × 2 × 2
-
Plate 2 × 3 × 2
-
Plate 2 × 3 × 2
-
Plate 1 × 2 × 2
-
Plate 1 × 2 × 2
-
Brick Sloped 45° 2 × 1 with Bottom Pin × 2
-
Brick Round 1 × 1 Open Stud × 2
-
Brick 1 × 2 without Bottom Tube × 2
-
Tile 1 × 1 with Groove × 2
-
Plate 1 × 6 × 2
-
Plate 1 × 4 × 2
-
Plate 1 × 4 × 2
-
Panel 1 × 1 × 1 Corner × 2
-
Tile 2 × 2 Corner × 2
-
Plate Special 1 × 1 with Vertical Tooth × 2
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) × 2
-
Wheel Arch, Mudguard 4 × 2 1/2 × 2 1/3 No longer produced · last seen 2021 × 2
-
Wheel Arch, Mudguard 4 × 2 1/2 × 2 1/3 No longer produced · last seen 2018 × 2
-
Brick Special 2 × 4 × 1 1/3 with Pin Holes and 2 × 2 Recessed No longer produced · last seen 2020 × 2
-
Tile Round 1 × 1 Quarter × 2
-
Wedge Plate 2 × 2 Cut Corner × 2
-
Plate Special 1 × 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) × 2
-
Tile 45° Cut 2 × 2 (Triangle) × 2
-
Tile 45° Cut 2 × 2 (Triangle) × 2
-
Plate Round 2 × 2 with Axle Hole Type 1 (+ Opening) × 2
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 2
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 2
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 2
-
Tile 1 × 3 × 2
-
Brick Sloped 30° 1 × 2 × 2/3 × 2
-
Brick Curved 2 × 4 × 2/3 No Studs, with Bottom Tubes No longer produced · last seen 2024 × 2
-
Brick Curved 4 × 2 No Studs × 2
-
Tile 1 × 4 with Groove × 1
-
Brick 2 × 4 × 1
-
Brick 1 × 2 × 1
-
Brick Sloped 45° 2 × 2 × 1
-
Hinge Brick 1 × 2 Base × 1
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (13)
These extra parts come with the set in case one gets lost.
-
Wheel Cover 5 Spoke - for Wheel 18976 No longer produced · last seen 2020 × 4
-
Headwear Accessory Visor For Standard Helmet No longer produced · last seen 2023 × 1
-
Plate 1 × 1 × 1
-
Tile Special Round 1 × 1 with Hollow Bar × 1
-
Tile Round 1 × 1 Quarter × 1
-
Tile 1 × 1 with Groove × 1
-
Tile 1 × 1 with Groove × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
-
Plate Round 1 × 1 with Open Stud × 1
Minifigures 1
Alternative models
Fan models by Rebrickable users that you can build (mostly) from this set’s parts. Instructions are available from the designers.
- 75885 Shark
- 75885 Chevy Corvette
- 75885 Land Rover LR3
- 75885 Chevrolet Camaro
- 75885 Semi Truck
- 75885 1968 Ford Mustang Fastback
- 75885 - Helicopter Fiesta
- 75885 Pickup Truck
- 75885 Bandit
- 75885 Porsche 911
- 75885 Minivan
- 75885 Ford Fiesta M-Sport WRC Chibi Alternate
Description
A real rally car, scaled down
The Ford Fiesta WRC is a real rally car campaigned by the M-Sport team in the World Rally Championship, and LEGO® recreates it here at the scale typical of the Speed Champions line. At 206 pieces the build stays quick and compact, fitting a range that favours small, detailed vehicle models over large diorama scenes. The 84 unique parts pack enough variety into that piece count to produce a recognisable, scale-accurate car shape. That places the model within a growing collection of real rally and racing cars across the Speed Champions range, aimed squarely at motorsport fans.
The M-Sport livery, brick by brick
Black, dark blue, white and yellow make up the set's colour scheme, matching the M-Sport team livery seen on real rally stages. That combination makes the Fiesta instantly recognisable next to other Speed Champions cars and clearly distinct from the colours used by rival rally or racing teams in the range. The colour list on this page shows exactly how the four shades are distributed across the bodywork. Anyone with several Speed Champions cars can immediately tell from the livery which team and series a given model represents.
A driver for the stage
With one minifigure included, the model comes with its own driver, so it works as a display piece and a set you can actually race, especially alongside other Speed Champions tracks or vehicles. For rally fans, it's a compact way to own a well-known WRC car in LEGO® form without committing to a larger track set. The car's compact size also makes it easy to line up several models together without needing much display space.
84 parts shaping the bodywork
With 84 unique parts across 206 pieces total, the set shows how much shape variety even a compact Speed Champions model needs to capture a rally car's distinctive silhouette. The full parts list on this page catalogues every element individually, useful if you need a specific blue or yellow body piece, whether for a repair or to compare against other vehicles in the range. Details such as the spoiler, headlights and wheels are each made from several small specialised parts listed individually on this page.
FAQ
- What real vehicle does the set recreate?
- It recreates the Ford Fiesta WRC, the rally car campaigned by the M-Sport team in the World Rally Championship.
- How many pieces does 75885 contain?
- The set consists of 206 pieces, split across 84 unique parts.
- Does the set include a minifigure?
- Yes, the set includes one minifigure as the rally car's driver.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



