
LEGO® 2018 Dodge Challenger SRT Demon and 1970 Dodge Charger R/T
Set 75893 pairs two iconic Dodge muscle cars from different decades within the LEGO® Speed Champions range: the modern 2018 Dodge Challenger SRT Demon and the classic 1970 Dodge Charger R/T. With 485 pieces and three minifigures, it's a two-car set built for muscle car fans.
- Set number
- 75893
- Year
- 2019
- Pieces
- 485
- Minifigures
- 3
- Theme
- Speed Champions
- Different parts
- 148
Parts list 148
-
Brick Special 1 × 1 with Headlight × 14
-
Plate Round 1 × 1 with Open Stud × 12
-
Bracket 1 × 2 - 1 × 2 Inverted × 12
-
Plate Round 1 × 1 with Solid Stud × 10
-
Plate 1 × 6 × 9
-
Plate 2 × 4 × 8
-
Plate 1 × 2 × 8
-
Plate 1 × 1 × 8
-
Technic Axle Pin without Friction Ridges Lengthwise × 8
-
Plate Round 1 × 1 with Solid Stud × 8
-
Tile 1 × 6 with Groove × 8
-
Technic Pin Connector Hub with 2 Perpendicular Axles × 8
-
Brick Curved 2 × 1 No Studs [1/2 Bow] × 8![Brick Curved 2 × 1 No Studs [1/2 Bow] Black](/media/parts/11477/0/brick-curved-2-x-1-no-studs-12-bow-black.jpg)
-
Brick Curved 2 × 1 No Studs [1/2 Bow] × 8![Brick Curved 2 × 1 No Studs [1/2 Bow] Yellow](/media/parts/11477/14/brick-curved-2-x-1-no-studs-12-bow-yellow.jpg)
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) × 8
-
Wheel 18 × 12 with Axle Hole and Stud No longer produced · last seen 2023 × 8
-
Tyre 24 × 12 Low Profile × 8
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced × 8
-
Cone 1 × 1 [Top Groove] × 8![Cone 1 × 1 [Top Groove] Black](/media/parts/59900/0/cone-1-x-1-top-groove-black.jpg)
-
Tile Round 1 × 1 × 8
-
Plate 1 × 4 × 7
-
Plate 2 × 2 Corner × 6
-
Plate 1 × 3 × 6
-
Brick Curved Inverted 2 × 1 × 6
-
Plate Special 2 × 2 with Only 2 studs × 6
-
Plate Special 1 × 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) × 6
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 6
-
Tile Round 1 × 1 × 6
-
Plate 2 × 3 × 5
-
Tile 1 × 3 × 5
-
Wheel Cover 5 Spoke - for Wheel 18976 No longer produced · last seen 2019 × 4
-
Tile 1 × 4 with Groove × 4
-
Brick Special 2 × 4 × 1 1/3 with Pin Holes and 2 × 2 Recessed No longer produced · last seen 2020 × 4
-
Wheel Cover 10 Spoke - for Wheel 18976 No longer produced · last seen 2021 × 4
-
Tile Round 1 × 1 Half Circle with Red and White Lines No longer produced · last seen 2020 × 4
-
Plate 1 × 2 × 4
-
Plate 1 × 6 × 4
-
Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots No longer produced · last seen 2021 × 4
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) × 4
-
Tile Round 1 × 1 Quarter × 4
-
Tile 1 × 1 with Red R/T print No longer produced · last seen 2019 × 4
-
Wheel Arch, Mudguard 4 × 2 × 2 1/2 × 4
-
Wheel Arch, Mudguard 4 × 2 × 2 1/2 No longer produced · last seen 2023 × 4
-
Hub Cap 24mm without Tube No longer produced · last seen 2021 × 4
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) No longer produced · last seen 2024 × 4
-
Tile Round 1 × 1 × 4
-
Bracket 1 × 2 - 2 × 2 Inverted × 4
-
Brick 2 × 2 × 3
-
Plate 1 × 2 × 3
-
Brick Curved 2 × 2 × 2/3 × 3
-
Tile 1 × 2 with Groove × 3
-
Plate 1 × 4 × 3
-
Plate Special 1 × 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) × 3
-
Plate Round 2 × 2 with Axle Hole Type 1 (+ Opening) × 3
-
Plate Special 1 × 4 with 2 Studs with Groove [New Underside] × 3![Plate Special 1 × 4 with 2 Studs with Groove [New Underside] Black](/media/parts/41740/0/plate-special-1-x-4-with-2-studs-with-groove-new-underside-black.jpg)
-
Brick Sloped 30° 1 × 2 × 2/3 × 3
-
Brick Curved 2 × 4 × 2/3 No Studs, with Bottom Tubes × 3
-
Tile Special 1 × 2 Grille with Bottom Groove × 2
-
Plate 2 × 2 Corner × 2
-
Plate 2 × 2 Corner × 2
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (19)
These extra parts come with the set in case one gets lost.
-
Tile Round 1 × 1 Half Circle with Red and White Lines No longer produced · last seen 2020 × 1
-
Headwear Accessory Visor For Standard Helmet × 1
-
Plate 1 × 1 × 1
-
Plate 1 × 1 × 1
-
Plate 1 × 1 × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Tile Round 1 × 1 Quarter × 1
-
Tile Round 1 × 1 Quarter × 1
-
Tile Round 1 × 1 Quarter × 1
-
Tile 1 × 1 with Red R/T print No longer produced · last seen 2019 × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) No longer produced · last seen 2024 × 1
-
Plate Round 1 × 1 with Open Stud × 1
-
Bar 3L × 1
-
Tile Round 1 × 1 × 1
Minifigures 3
Alternative models
Fan models by Rebrickable users that you can build (mostly) from this set’s parts. Instructions are available from the designers.
- El Camino and Belair 75893 + 75885 porsche 914
- 75893 Mad Trucks
- 75893 Vanlife
- 75893 BOY RACERS
- 75893 New Cars
- 75893 Off Road Adventures
- 75893 8x8 Dump Truck
- 75893 Hot Rod Crew
- 75893 Hot Rods
- 75893 Formula cars
- 75893 Mad Charger
- 75893 Family Wagon
Description
Two generations of muscle car
The 1970 Dodge Charger R/T is one of the most recognisable muscle cars of the classic era, familiar from countless film appearances, while the 2018 Dodge Challenger SRT Demon represents the modern, extreme-performance take on the same idea. Putting both in one set traces how the muscle car concept has changed over nearly five decades, from the Charger's classic bodywork to the Demon's more aggressive, aerodynamic styling. With 485 pieces split between two complete cars, each model stays within Speed Champions' usual compact scale.
Black and yellow for contrast
Black and yellow supply the strongest colour accents in the set, with light bluish grey and dark bluish grey covering the chassis and technical details – a combination that captures the bold, high-contrast look associated with American muscle cars. Since the two vehicles use their colours differently, sorting pieces before building makes it easy to tell which parts belong to which car. The colour breakdown on this page shows exactly how black, yellow and the two greys are spread across the set's 148 unique parts.
Three drivers, two cars
Three minifigures come with the set, enough to crew both vehicles and set up a head-to-head race between the classic and modern generations. That fits the core idea behind LEGO Speed Champions, which blends real automotive history with collecting and racing play. For fans of American muscle cars who like displaying different eras side by side, this two-car set is a compact way to own both at once.
148 parts across two distinct shapes
With 148 unique parts across 485 pieces for two vehicles, the focus sits squarely on the distinctive bodywork of each car, from the Charger's classic silhouette to the Demon's aggressive intake details. The full parts list on this page catalogues every element and notes which car it belongs to, useful if a piece goes missing or you're after a specific yellow or black shade before sourcing a replacement elsewhere.
FAQ
- Which two cars does set 75893 include?
- It combines the modern 2018 Dodge Challenger SRT Demon with the classic 1970 Dodge Charger R/T in one two-car set.
- How many pieces and minifigures does the set contain?
- 75893 includes 485 pieces across 148 unique parts, plus three minifigures shared between the two vehicles.
- What colours make up the two cars?
- Black and yellow provide the main accents, with light bluish grey and dark bluish grey used for chassis and technical parts.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



