
The Milano vs. The Abilisk
Set 76081 depicts the Guardians of the Galaxy's ship, the Milano, battling the tentacled Abilisk from Guardians of the Galaxy Vol. 2. 462 pieces build both the ship and the creature, plus four minifigures from the film. Light bluish grey, dark bluish grey, blue and black define the ship's metallic look.
- Set number
- 76081
- Year
- 2017
- Pieces
- 462
- Minifigures
- 4
- Different parts
- 166
Parts list 166
-
Plate 1 × 2
× 17
-
Brick Curved 2 × 1 No Studs [1/2 Bow]
× 12
-
Technic Pin with Friction Ridges Lengthwise and Center Slots
No longer produced · last seen 2021
× 9
-
Plate Special 1 × 2 5.9mm Centre Side Towball Socket
× 9
-
Plate Round 2 × 2 with Axle Hole Type 1 (+ Opening)
× 9
-
Technic Pin with Friction Ridges Lengthwise and Towball
No longer produced · last seen 2020
× 9
-
Plate 1 × 6
× 8
-
Plate Round 1 × 1 with Solid Stud
× 8
-
Plate Special 2 × 2 with 1 Pin Hole [Complete Underside Rib]
× 8
-
Plate Round 2 × 2 with Rounded Bottom [Boat Stud]
× 6
-
Plate 1 × 2
× 6
-
Plate Round 1 × 1 with Solid Stud
× 6
-
Plate Special 1 × 2 with Three Teeth [Tri-Tooth]
× 6
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
× 6
-
Plate Special 1 × 2 with Clips Horizontal [Open O Clips]
× 6
-
Plate 2 × 2 Corner
× 5
-
Plate Round 1 × 1 with Solid Stud
× 5
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 5
-
Wedge Plate 3 × 3 Cut Corner
× 4
-
Plate 2 × 3
× 4
-
Plate 1 × 1
× 4
-
Plate 1 × 3
× 4
-
Plate 1 × 3
× 4
-
Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots
No longer produced · last seen 2021
× 4
-
Brick Special 1 × 2 with 2 Studs on 1 Side
× 4
-
Brick Curved 2 × 2 × 2/3
× 4
-
Plate Special Round 2 × 2 with Center Stud (Jumper Plate)
× 4
-
Brick Special 1 × 1 with Studs on 2 Adjacent Sides
× 4
-
Plate Special 2 × 4 with Pins
No longer produced · last seen 2021
× 4
-
Plate Round 2 × 2 with Axle Hole Type 1 (+ Opening)
× 4
-
Animal Body Part / Plant, Tail / Trunk / Tentacle / Tongue / Vine / Tree Branch (Short Tip)
No longer produced · last seen 2022
× 4
-
Bracket 1 × 2 - 2 × 2
× 4
-
Plate Special 1 × 2 [Side Handle Closed Ends]
× 4
-
Wedge Plate 8 × 3, 22° Right
× 4
-
Wedge Plate 8 × 3, 22° Left
× 4
-
Plate Special 1 × 1 with Clip Horizontal [Thick Open O Clip]
× 4
-
Brick Special 1 × 1 with Stud on 1 Side
× 4
-
Plate Special 1 × 2, Top Clip [Split]
No longer produced · last seen 2021
× 4
-
Bracket 1 × 2 - 1 × 2
× 4
-
Plate 1 × 2
× 3
-
Plate 1 × 8
× 3
-
Technic Brick 1 × 4 [3 Pin Holes]
× 3
-
Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle
× 3
-
Animal Body Part / Plant, Tail / Neck / Branch / Trunk, Middle Section with Pin, Round Pin Hole
No longer produced · last seen 2017
× 3
-
Wedge Plate 4 × 2 Right
× 3
-
Wedge Plate 4 × 2 Left
× 3
-
Wedge Plate 3 × 2 Right
× 3
-
Wedge Plate 3 × 2 Left
× 3
-
Brick Wedged, Sloped 4 × 4 Triple, Stud Notches
No longer produced · last seen 2017
× 3
-
Tile Round 1 × 1
× 3
-
Tile Special 1 × 2 Grille with Bottom Groove
× 2
-
Brick Sloped 45° 2 × 1 with Bottom Pin
× 2
-
Brick Round 1 × 1 Open Stud
× 2
-
Brick Round 1 × 1 Open Stud
× 2
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced
× 2
-
Brick 1 × 2 × 2 with Inside Stud Holder
× 2
-
Technic Gear 24 Tooth [New Style with Single Axle Hole]
× 2
-
Weapon Dagger / Knife
× 2
-
Brick 2 × 2 Corner
× 2
-
Tile 1 × 4 with Groove
× 2
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (15)
These extra parts come with the set in case one gets lost.
-
Plate 1 × 1
× 2
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced
× 2
-
Plate Round 1 × 1 with Solid Stud
× 2
-
Plate Round 1 × 1 with Solid Stud
× 2
-
Technic Pin with Friction Ridges Lengthwise and Center Slots
No longer produced · last seen 2021
× 1
-
Plate 1 × 1
× 1
-
Plate 1 × 1
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Launcher Trigger, Weapon Gun Trigger
× 1
-
Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard]
× 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 1
-
Equipment Handcuffs
× 1
-
Tile Round 1 × 1
× 1
-
Tile Round 1 × 1 with Eye Print
No longer produced · last seen 2018
× 1
Minifigures 4
Alternative models
Fan models by Rebrickable users that you can build (mostly) from this set’s parts. Instructions are available from the designers.
What can I build with it?Description
Two builds in one set
Rather than a single model, 76081 delivers two: the spaceship Milano and the multi-armed Abilisk as its opponent. With 462 pieces and 166 distinct parts, there's enough material for both elements without either feeling like an afterthought. The ship has an opening cockpit and panelled detailing, while the Abilisk is built from posable segments that combine into long, reaching tentacles. This combination makes the set especially appealing for fans who want to recreate a fight scene rather than just place a ship on a shelf.
Four minifigures from the film
Four minifigures accompany the standoff between ship and monster, letting you re-enact the scene from the second Guardians film directly. Combined with posable elements on the Abilisk, such as its tentacles, the set offers more interaction than a pure display model. Figures can be placed both inside the Milano's cockpit and on the ground facing the Abilisk, allowing different moments of the chase to be recreated. Anyone familiar with the film series will recognise both the scene and the characters straight away.
A metallic look in grey and blue
Light bluish grey, dark bluish grey, blue and black dominate the colour scheme, underlining the technical, slightly battered character of the Milano. The 166 distinct parts cover both smooth panel pieces for the ship and specialist elements for the Abilisk's tentacles. This mix of vehicle parts and creature elements makes for a more varied build than a standalone spaceship set without an opponent. The parts list on this page shows exactly which colours appear, in what quantities, and on which part of the model.
Who it's for
At around 460 pieces, this sits in the mid-size bracket and suits Marvel and Guardians fans who want to build a scene rather than one huge standalone model. The combination of ship, creature and four figures keeps play value high even after the build, while experienced collectors can repurpose the Abilisk's specialist pieces for their own creature builds. Younger builders should also manage the piece count comfortably without the scene losing any of its drama. Displayed together, ship and creature make for a compact but action-packed shelf scene from the Marvel universe.
FAQ
- What does set 76081 depict?
- It shows the spaceship Milano battling the Abilisk from Guardians of the Galaxy Vol. 2.
- How many pieces and minifigures come with the set?
- 462 pieces across 166 distinct parts, plus four minifigures from the film.
- Is the set good for re-enacting scenes?
- Yes, the Abilisk's posable tentacles and the four minifigures make it well suited to recreating the film's fight scene.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



