
Batmobile Tumbler: Scarecrow Showdown
This set recreates the boxy Tumbler Batmobile from the Dark Knight films, packaged as a showdown with the villain Scarecrow. It includes 422 pieces and two minifigures, focused on a single vehicle and a clear conflict rather than a wider scene. It suits fans of the more grounded, armoured Batmobile design rather than the classic finned style.
- Set number
- 76239
- Year
- 2021
- Pieces
- 422
- Minifigures
- 2
- Theme
- Batman
- Different parts
- 130
Parts list 130
-
Plate Round 1 × 1 with Solid Stud
No longer produced · last seen 2024
× 14
-
Tile Special 1 × 2 with Sloped Walls AKA Money / Gold Bar [Ingot]
× 13
-
Plate 1 × 2
× 12
-
Brick Curved 1 × 1 × 2/3 Double Curved Top, No Studs
× 12
-
Bracket 1 × 2 - 1 × 2 Inverted
× 12
-
Bracket 1 × 2 - 2 × 2 Inverted
× 10
-
Plate 2 × 2 Corner
× 8
-
Brick 1 × 2
× 8
-
Plate Round 1 × 1 with Solid Stud
× 8
-
Brick Sloped 45° 2 × 1 with 2/3 Cutout [New Version]
× 8
-
Plate Special 1 × 2 Rounded with 2 Open Studs
× 8
-
Plate Special 1 × 2, Top Clip [Open O]
× 8
-
Plate Special 1 × 1 with Clip Horizontal [Thick Open O Clip]
× 8
-
Plate 2 × 3
× 7
-
Plate 1 × 3
× 7
-
Brick Sloped 30° 1 × 2 × 2/3
× 7
-
Plate Special 2 × 2 with Pin on Bottom
× 6
-
Plate 2 × 4
× 6
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced
× 6
-
Plate 1 × 4
× 6
-
Plate Special 1 × 2 with Handle on End [Closed Ends]
× 6
-
Tile Round 1 × 1
× 6
-
Plate Special 2 × 2 with Only 2 studs
× 5
-
Plate Special 1 × 2 Side Handle [Free Ends]
× 4
-
Plate 2 × 6
× 4
-
Brick Curved 1 × 2 × 1 1/3 with Curved Top
× 4
-
Brick Curved 2 × 1 No Studs [1/2 Bow]
× 4
-
Tyre 49.53 × 20
× 4
-
Plate Special 1 × 2 with Handles on Ends
× 4
-
Brick Sloped 45° 2 × 1 with 2/3 Inverted Cutout and no stud
× 4
-
Wedge Plate 4 × 2 Right
× 4
-
Wedge Plate 4 × 2 Left
× 4
-
Wheel 30 × 20 5-Spoke
No longer produced · last seen 2021
× 4
-
Flag 2 × 2 Trapezoid with Flat Area between Clips
No longer produced · last seen 2021
× 4
-
Brick Sloped 18° 2 × 1 × 2/3 with 4 Slots / Grate
× 4
-
Plate Special 1 × 2 with Clip Horizontal on End
× 4
-
Plate Special 1 × 2 with Clip Vertical on End
× 4
-
Tile Round 1 × 1
× 4
-
Spoiler 2 × 4 with Handle [Plain]
× 4
-
Tile 1 × 4 with Groove
× 3
-
Brick 1 × 4
× 3
-
Plate 2 × 4
× 3
-
Plate 2 × 2
× 3
-
Plate 4 × 4
× 3
-
Tile Special 2 × 3 Pentagonal
× 3
-
Tile 1 × 2 with Groove
× 3
-
Plate Round 1 × 1 with Solid Stud
No longer produced · last seen 2023
× 3
-
Launcher Trigger, Weapon Gun Trigger
× 3
-
Bracket 1 × 2 - 2 × 2
× 3
-
Tile 2 × 4 with Groove
× 3
-
Windscreen 3 × 6 × 2
No longer produced · last seen 2023
× 3
-
Tile 2 × 2 with Groove
× 2
-
Brick 1 × 3
× 2
-
Plate 1 × 3
× 2
-
Plate 1 × 6
× 2
-
Technic Brick 1 × 2 [1 Pin Hole]
× 2
-
Technic Brick 1 × 8 [7 Pin Holes]
× 2
-
Technic Bush
× 2
-
Hinge Brick 1 × 4 [Upper]
× 2
-
Hinge Brick 1 × 4 [Lower]
× 2
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (18)
These extra parts come with the set in case one gets lost.
-
Technic Bush
× 1
-
Plate Round 1 × 1 with Solid Stud
No longer produced · last seen 2023
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Plate Round 1 × 1 with Solid Stud
No longer produced · last seen 2024
× 1
-
Launcher Trigger, Weapon Gun Trigger
× 1
-
Technic Pin Connector Round 1L [Beam]
× 1
-
Tile Special Round 1 × 1 with Hollow Bar
× 1
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced
× 1
-
Plate Special Round 1 × 1 with Hollow Stud and Horizontal Bar 1L
× 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 1
-
Plate Round 1 × 1 with Open Stud
× 1
-
Plate Round 1 × 1 with Open Stud
× 1
-
Bucket 1 × 1 × 1 Handle
× 1
-
Tile Round 1 × 1
× 1
-
Tile Round 1 × 1
× 1
-
Weapon Batarang
× 1
Minifigures 2
Description
An armoured, angular Batmobile
Unlike most comic or earlier film versions of the Batmobile, the Tumbler is built as a boxy, armoured vehicle with oversized wheels, closer in spirit to a military transport than a sports car. The LEGO® model carries that angular design through its 422 pieces, capturing the heavy front end and prominent tyres reasonably faithfully. Black, light bluish grey and dark bluish grey give the model the dark, militaristic tone associated with the Dark Knight films. Small pearl gold accents add a few deliberate highlights against an otherwise dark colour scheme.
Scarecrow as the opposing figure
Scarecrow is one of Batman's more psychologically driven villains, known for his fear-gas weapon and distinctive mask. Including him as a dedicated minifigure gives the set a specific conflict rather than just a vehicle to look at. Paired with the Batman minifigure, it forms a self-contained confrontation scene straight out of the box. Anyone familiar with the Dark Knight films will recognise the pairing immediately and can recreate scenes from the story.
Two minifigures, one clear standoff
With just two minifigures, the set deliberately focuses on a one-on-one standoff between Batman and Scarecrow rather than a larger group scene. That fits the darker, more dramatic tone of the Dark Knight films the Tumbler comes from. For collectors who already own other Batman sets, this pairing specifically fills out the villain side of a growing collection. Keeping the figure count low also leaves more of the piece budget for the vehicle itself.
130 parts behind the armour
130 unique parts across 422 pieces gives the set a fair amount of detail for its size, which matches the Tumbler's heavily panelled, angular armour. The full parts list on this page covers every element, including the gold accent pieces, which is useful if you're after a specific colour or shape. It's also a solid parts source for anyone building custom vehicles in a similar military style.
FAQ
- How many pieces and minifigures does the set include?
- The set has 422 pieces and two minifigures, Batman and Scarecrow.
- Where does the Tumbler design come from?
- The Tumbler is the boxy, armoured Batmobile from the Dark Knight film trilogy, quite different from the classic finned Batmobile designs.
- What colours define the model?
- Black, light bluish grey and dark bluish grey dominate, with pearl gold used for accents.



