
Baxter Robot Rampage
Baxter Robot Rampage is part of LEGO's 2013 Teenage Mutant Ninja Turtles line, built around a fight against Baxter Stockman's giant robot suit. The set comes with 397 pieces, 137 unique elements and four minifigures. This page covers the full facts plus the complete parts list.
- Set number
- 79105
- Year
- 2013
- Pieces
- 397
- Minifigures
- 4
- Different parts
- 137
Parts list 137
-
Plate Round 2 × 2 with Axle Hole Type 1 (+ Opening)
× 16
-
Plate 1 × 2
× 15
-
Technic Axle Pin with Friction Ridges Lengthwise
× 12
-
Bracket 1 × 2 - 2 × 2
× 12
-
Plate 2 × 4
× 11
-
Brick Curved 4 × 2 No Studs
× 11
-
Arm Mechanical with Clip [Thin Support]
No longer produced · last seen 2014
× 10
-
Plate Round 1 × 1 with Solid Stud
× 9
-
Brick Special 1 × 2 Palisade [aka Log]
× 9
-
Technic Brick 1 × 2 [2 Pin Holes]
× 8
-
Light Cover 1 × 1 Round with Internal Bar / Bionicle Barraki Eye
No longer produced · last seen 2017
× 8
-
Technic Brick 1 × 2 with Axle Hole Type 2 [X Opening]
No longer produced · last seen 2014
× 6
-
Brick Sloped Inverted 33° 3 × 2, Connections between Studs, Ovoid Bottom Pin
No longer produced · last seen 2024
× 6
-
Technic Brick Special 2 × 2 with Ball Socket Wide and Axle Hole
No longer produced · last seen 2021
× 6
-
Bracket 1 × 2 - 1 × 2 Inverted
× 6
-
Plate Round 2 × 2 with Rounded Bottom [Boat Stud]
× 5
-
Brick Curved 2 × 2 × 2/3 Two Studs and Curved Slope End
× 5
-
Technic Pin 1/2 with 2L Bar Extension
× 5
-
Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]
× 4
-
Tyre 14 × 9 Smooth Small Wide Slick
× 4
-
Brick Sloped 45° 2 × 1 with Bottom Pin
× 4
-
Plate 2 × 6
× 4
-
Tile Special 1 × 1 with Clip with Rounded Tips
No longer produced · last seen 2015
× 4
-
Technic Tooth 1 × 3 with Axle Hole [Rounded Underside]
No longer produced · last seen 2015
× 4
-
Brick Wedged, Curved 6 × 4 Triple
No longer produced · last seen 2021
× 4
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 4
-
Cone 1 × 1 [Top Groove]
× 4
-
Plate Special 1 × 2 with Clip Horizontal on End
× 4
-
Technic Beam 1 × 2 with Ball Joint Straight, Smooth Ball
No longer produced · last seen 2021
× 4
-
Wheel 8 × 9 with Hole Notched for Wheels Holder Pin, Re-inforced Back
× 4
-
Bracket 1 × 2 - 2 × 2 Inverted
× 4
-
Plate Special 1 × 2 Side Handle [Free Ends]
× 3
-
Plate Special 1 × 4 with Wheels Holder
× 3
-
Brick 2 × 2
× 3
-
Plate 2 × 3
× 3
-
Plate 2 × 2
× 3
-
Tile 2 × 2 with Groove
× 3
-
Tile 1 × 2 with Groove
× 3
-
Technic Brick 1 × 2 [1 Pin Hole]
× 3
-
Plate Round 1 × 1 with Solid Stud
× 3
-
Technic Axle 3 with Stud
× 3
-
Wedge Plate 2 × 4
× 3
-
Brick Sloped 30° 1 × 2 × 2/3
× 3
-
Brick Special 1 × 1 with Stud on 1 Side
× 3
-
Tile Special 1 × 2 with Handle
× 2
-
Brick Sloped Inverted 75° 2 × 1 × 3
× 2
-
Wheel Skateboard / Trolley
× 2
-
Technic Pin with Friction Ridges Lengthwise and Center Slots
No longer produced · last seen 2021
× 2
-
Lever Small Base with Black Lever
× 2
-
Brick Sloped 45° 2 × 2
× 2
-
Brick 1 × 2 × 2 with Inside Stud Holder
× 2
-
Brick Sloped Inverted 45° 2 × 1
× 2
-
Plate 1 × 4
× 2
-
Technic Bush
× 2
-
Technic Brick Special 2 × 2 with Solid Ball and Axle Hole
No longer produced · last seen 2013
× 2
-
Wheel 11 × 12 with Hole Notched for Wheels Holder Pin
× 2
-
Plate Round 1 × 1 with Solid Stud
× 2
-
Technic Brick 1 × 1 with Pin Hole
× 2
-
Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots
No longer produced · last seen 2021
× 2
-
Tile 1 × 6 with Groove
× 2
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (18)
These extra parts come with the set in case one gets lost.
-
String with End Studs 31L Overall
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Bar Holder with Clip
× 1
-
Tile Special 1 × 2 Grille with Bottom Groove
× 1
-
Technic Pin with Friction Ridges Lengthwise and Center Slots
No longer produced · last seen 2021
× 1
-
Lever Small Base with Black Lever
× 1
-
Plate 1 × 1
× 1
-
Technic Bush
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 1
-
Hose Rigid 3mm D. 3L / 2.4cm
No longer produced · last seen 2016
× 1
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium
No longer produced · last seen 2015
× 1
-
Weapon Bladed Claw
No longer produced · last seen 2018
× 1
-
Tile Round 1 × 1 with Gauge and Red Pointer Print
No longer produced · last seen 2021
× 1
-
Weapon Sai
No longer produced · last seen 2020
× 1
Minifigures 4
-
Raphael
× 1
-
April O'Neil
× 1
-
Donatello with Clenched Teeth
× 1
-
Baxter Stockman
× 1
Description
A poseable robot as the centrepiece
The main build is a large, articulated robot suit piloted by the villain Baxter Stockman, with moveable arms and legs that keep it playable after assembly rather than just a static display piece. At 397 pieces the build has enough substance to hold attention for a good session, while staying manageable for builders past the absolute beginner stage. The design leans on plenty of joint and hinge elements, giving it a slightly more technical feel than a typical vehicle set from the same era. Builders who already own other poseable LEGO sets will recognise familiar hinge techniques here, paired with the bold colour blocking typical of the TMNT range.
Colours and parts at a glance
Light bluish grey, dark bluish grey, black and yellow dominate the build, giving the robot an industrial, faintly menacing look. Among the 137 unique elements are a good number of hinge and Technic-style connector pieces, typical of poseable LEGO models from this period. The full parts list on this page shows exactly which bricks appear and in which colours, useful if you're after matching pieces for your own robot or mech builds. If you're after stock for your own mech projects, this set is mainly a source of grey and black hinge pieces that combine easily with other builds.
Four minifigures for play scenes
The set includes four minifigures, among them Baxter Stockman piloting the robot suit alongside several characters from the Teenage Mutant Ninja Turtles cast. Together they let you recreate the confrontation from the show directly, without needing to combine other sets. For fans of the 2012 TMNT series, this is one of the more direct translations of a specific on-screen conflict into a set. The scene also extends naturally if you own other sets from the same TMNT wave, since scale and colours line up closely.
Who this set suits
Baxter Robot Rampage suits kids and teens familiar with the show who want to re-enact scenes, as well as collectors building out an older TMNT line-up. The moveable joints keep play value high after building, unlike sets designed purely as static dioramas. The Technic-heavy parts are also useful stock for your own mech or robot creations once you've finished and photographed this build. As a gift it particularly suits children who already have some experience with more complex LEGO builds but aren't quite ready for much larger sets.
FAQ
- How many pieces does Baxter Robot Rampage have?
- Set 79105 has 397 pieces and 137 unique elements, all listed in the parts list on this page.
- Is the robot poseable?
- Yes, the large robot suit's arms and legs can be moved, keeping the set playable after it's built.
- How many minifigures are included?
- The set comes with four minifigures, including the villain Baxter Stockman.



