
LEGO® Grand Prix Race
Grand Prix Race is part of the Speed Racer range, which appeared in 2008 alongside the film of the same name. It has 600 pieces and seven minifigures, bringing a race, its drivers and onlookers together.
- Set number
- 8161
- Year
- 2008
- Pieces
- 600
- Minifigures
- 7
- Theme
- Speed Racer
- Different parts
- 175
Parts list 175
-
Tile 1 × 2 with Groove × 18
-
Tile 1 × 2 with Groove × 16
-
Plate Special 1 × 2 with 1 Stud without Groove (Jumper) No longer produced · last seen 2014 × 15
-
Tyre 24 × 14 Shallow Tread (Tread Small Hub) No longer produced · last seen 2012 × 14
-
Brick Curved 4 × 1 No Studs [Stud Holder with Asymmetric Ridges] No longer produced · last seen 2012 × 14![Brick Curved 4 × 1 No Studs [Stud Holder with Asymmetric Ridges] Black](/media/parts/61678/0/brick-curved-4-x-1-no-studs-stud-holder-with-asymmetric-ridges-black.jpg)
-
Wheel 18mm x 14mm with Axle Hole, Fake Bolts and Shallow Spokes × 13
-
Tile 1 × 2 with Groove × 11
-
Brick Curved 4 × 1 No Studs [Stud Holder with Asymmetric Ridges] No longer produced · last seen 2012 × 11![Brick Curved 4 × 1 No Studs [Stud Holder with Asymmetric Ridges] White](/media/parts/61678/15/brick-curved-4-x-1-no-studs-stud-holder-with-asymmetric-ridges-white.jpg)
-
Brick 1 × 2 × 5 with Blocked Open Studs and Bottom Stud Holder with Asymmetric Ridges No longer produced · last seen 2017 × 10
-
Brick Special 1 × 1 with Headlight × 10
-
Technic Axle Pin without Friction Ridges Lengthwise × 9
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 9
-
Tile Special 1 × 1 with Clip and Straight Tips No longer produced · last seen 2014 × 8
-
Plate 1 × 6 × 8
-
Plate 2 × 4 × 7
-
Plate 1 × 6 × 7
-
Plate Round 1 × 1 with Solid Stud × 7
-
Plate 1 × 2 × 6
-
Plate 1 × 8 × 6
-
Technic Brick 1 × 16 [15 Pin Holes] × 6![Technic Brick 1 × 16 [15 Pin Holes] Black](/media/parts/3703/0/technic-brick-1-x-16-15-pin-holes-black.jpg)
-
Wedge Plate 4 × 2 Right × 6
-
Wedge Plate 4 × 2 Left × 6
-
Brick 1 × 2 × 5
-
Plate 2 × 3 × 5
-
Support 2 × 4 × 5 Stanchion Inclined [5mm Wide Posts] No longer produced · last seen 2024 × 5![Support 2 × 4 × 5 Stanchion Inclined [5mm Wide Posts] White](/media/parts/4476b/15/support-2-x-4-x-5-stanchion-inclined-5mm-wide-posts-white.jpg)
-
Plate Round 1 × 1 with Solid Stud × 5
-
Brick Curved 4 × 1 No Studs [Stud Holder with Asymmetric Ridges] No longer produced · last seen 2012 × 5![Brick Curved 4 × 1 No Studs [Stud Holder with Asymmetric Ridges] Yellow](/media/parts/61678/14/brick-curved-4-x-1-no-studs-stud-holder-with-asymmetric-ridges-yellow.jpg)
-
Wheel Arch, Mudguard, 1 1/2 × 6 × 1 [Arch Extended] × 5![Wheel Arch, Mudguard, 1 1/2 × 6 × 1 [Arch Extended] White](/media/parts/62361/15/wheel-arch-mudguard-1-12-x-6-x-1-arch-extended-white.jpg)
-
Flag 2 × 2 Square [Thin Clips] No longer produced · last seen 2013 × 4![Flag 2 × 2 Square [Thin Clips] White](/media/parts/2335/15/flag-2-x-2-square-thin-clips-white.jpg)
-
Plate 2 × 2 Corner × 4
-
Plate 2 × 2 Corner × 4
-
Brick 1 × 2 × 5 with Blocked Open Studs and Bottom Stud Holder with Asymmetric Ridges No longer produced · last seen 2014 × 4
-
Plate Special 1 × 2 Side Handle [Free Ends] × 4![Plate Special 1 × 2 Side Handle [Free Ends] Black](/media/parts/2540/0/plate-special-1-x-2-side-handle-free-ends-black.jpg)
-
Technic Pin with Friction Ridges Lengthwise and Center Slots No longer produced · last seen 2021 × 4
-
Brick 1 × 4 × 4
-
Plate 2 × 4 × 4
-
Plate 2 × 2 × 4
-
Plate 1 × 2 × 4
-
Plate 4 × 4 × 4
-
Plate 4 × 4 × 4
-
Plate 2 × 8 × 4
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced × 4
-
Brick 1 × 3 × 4
-
Plate 1 × 3 × 4
-
Plate 2 × 6 × 4
-
Hinge Brick 1 × 4 [Upper] × 4![Hinge Brick 1 × 4 [Upper] White](/media/parts/3830/15/hinge-brick-1-x-4-upper-white.jpg)
-
Hinge Brick 1 × 4 [Lower] × 4![Hinge Brick 1 × 4 [Lower] White](/media/parts/3831/15/hinge-brick-1-x-4-lower-white.jpg)
-
Hinge Brick 1 × 2 Top Plate Thin × 4
-
Plate 2 × 16 × 4
-
Brick Sloped 33° 3 × 1 × 4
-
Equipment Frying Pan × 4
-
Brick Arch 1 × 6 × 2 Curved Top No longer produced · last seen 2020 × 4
-
Panel 1 × 1 × 1 Corner × 4
-
Brick Sloped 55° 1 × 6 × 5 No longer produced · last seen 2020 × 4
-
Hinge Brick 1 × 2 Locking with 2 Fingers Horizontal End, 9 Teeth No longer produced · last seen 2020 × 4
-
Antenna 1 × 4 with Rounded Top No longer produced · last seen 2013 × 4
-
Plate Special 1 × 1 with Clip Vertical [Thick U Clip] No longer produced · last seen 2014 × 4![Plate Special 1 × 1 with Clip Vertical [Thick U Clip] White](/media/parts/4085c/15/plate-special-1-x-1-with-clip-vertical-thick-u-clip-white.jpg)
-
Brick 1 × 10 × 4
-
Wedge Plate 4 × 2 Right × 4
-
Wedge Plate 4 × 2 Left × 4
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (8)
These extra parts come with the set in case one gets lost.
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 2
-
Technic Pin with Friction Ridges Lengthwise and Center Slots No longer produced · last seen 2021 × 1
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
Minifigures 7
-
Cannonball Taylor
× 1
-
Commentator
× 1
-
Gray Ghost
× 1
-
Pops Racer
× 1
-
Spritle
× 1
-
Trixie
× 1
-
Speed Racer, White Outfit
× 1
Description
A whole race, not just a car
The Speed Racer range is based on the 2008 film, which in turn draws on the well-known cartoon series. This set shows a full race rather than a single car. You build vehicles, a track and some surroundings, and afterwards you can stage races with several cars at once. That makes it attractive for children who like playing together and who want to crown a different winner every time round. Parents who know the film will find it easy to enter the scene.
Seven people on site
Seven minifigures is a large cast for the size of the set. Drivers, mechanics and other characters spread across the track and the pit area, so the model looks lively even when standing still. For collectors this is an unusually big group from a film line that is no longer in the shops. For your own stories, the figures can of course be mixed with other racing sets or with city scenes. That way even a small play session has someone at the side commenting on the race.
Sober colours, plenty of detail
Black, white, light bluish grey and dark bluish grey form the backbone. That looks plain at first glance, yet it suits tarmac, fences and the buildings around a circuit. The bright touches come from the vehicles and figures. With 125 different elements among 600 pieces, the choice is decent: enough special parts for car bodies, plus many standard bricks for grandstands and walls. The parts list shows the exact colour split. It keeps the track easy to read and simple to extend later.
Second-hand and combinable
The set dates from 2008 and is mostly available second-hand today. With so many figures and vehicles in one box, it is worth going through the parts list before buying so that wheels, windscreens and accessories are all there. If you already own it, the “What can I build?” tool shows what else your pieces make when combined with other sets. The race track then becomes a parts supply for further ideas. That saves frustration when it is the tiny parts that have gone missing.
FAQ
- How many pieces and minifigures does Grand Prix Race have?
- Set 8161 has 600 pieces, 125 of them different, and seven minifigures.
- Which theme is it from?
- It comes from the Speed Racer range and was released in 2008.
- Which colours are most common?
- Black, white, light bluish grey and dark bluish grey.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.


