
Parts list 150
-
Plate Round 1 × 1 with Solid Stud × 21
-
Brick Wedged 2 × 2 Facet × 16
-
Brick Round 1 × 1 Open Stud × 15
-
Brick Special 1 × 4 Palisade [aka Log] No longer produced · last seen 2011 × 13![Brick Special 1 × 4 Palisade [aka Log] Dark Bluish Gray](/media/parts/30137/72/brick-special-1-x-4-palisade-aka-log-dark-bluish-gray.jpg)
-
Arm Mechanical with Clip [Thin Support] No longer produced · last seen 2013 × 12![Arm Mechanical with Clip [Thin Support] White](/media/parts/53989/15/arm-mechanical-with-clip-thin-support-white.jpg)
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium × 12
-
Plate 1 × 4 × 11
-
Brick Special 1 × 1 with Stud on 1 Side × 10
-
Plate Special 1 × 2 with 1 Stud with Groove (Jumper) No longer produced · last seen 2017 × 8
-
Support Round 1 × 1 × 6 Solid Pillar × 8
-
Plate 1 × 2 × 7
-
Brick 1 × 2 × 5 with Blocked Open Studs and Bottom Stud Holder with Asymmetric Ridges No longer produced · last seen 2014 × 6
-
Brick Sloped 33° 3 × 4 No longer produced · last seen 2018 × 6
-
Brick Curved 1 × 5 × 4 Inverted × 6
-
Brick Special 1 × 2 Palisade [aka Log] × 6![Brick Special 1 × 2 Palisade [aka Log] Dark Bluish Gray](/media/parts/30136/72/brick-special-1-x-2-palisade-aka-log-dark-bluish-gray.jpg)
-
Brick Special 1 × 2 with Handle × 6
-
Brick Sloped 45° 2 × 1 with Bottom Pin × 6
-
Brick Sloped 45° 2 × 1 Double with Inside Stud Holder × 6
-
Technic Axle and Pin Connector Angled #2 - 180° × 6
-
Plate Special 1 × 2 with 1 Stud with Groove (Jumper) No longer produced · last seen 2015 × 6
-
Animal Body Part / Plant, Tail / Claw / Horn / Branch / Tentacle, End Section × 6
-
Panel 1 × 4 × 5 with Arched Window No longer produced · last seen 2012 × 6
-
Large Figure Tail / Horn No longer produced · last seen 2011 × 6
-
Technic Brick 1 × 2 with Axle Hole Type 2 [X Opening] No longer produced · last seen 2014 × 5![Technic Brick 1 × 2 with Axle Hole Type 2 [X Opening] White](/media/parts/32064b/15/technic-brick-1-x-2-with-axle-hole-type-2-x-opening-white.jpg)
-
Plate Round 2 × 2 with Axle Hole Type 1 (+ Opening) × 5
-
Technic Pin 1/2 without Friction Ridges × 5
-
Door Frame 1 × 4 × 6 Type 2 × 5
-
Brick Arch 1 × 5 × 4 [Continuous Bow] No longer produced · last seen 2013 × 4![Brick Arch 1 × 5 × 4 [Continuous Bow] Black](/media/parts/2339/0/brick-arch-1-x-5-x-4-continuous-bow-black.jpg)
-
Tile Special 1 × 1 with Clip and Straight Tips No longer produced · last seen 2012 × 4
-
Technic Pin with Friction Ridges Lengthwise and Center Slots No longer produced · last seen 2021 × 4
-
Brick 1 × 2 × 4
-
Plate 2 × 4 × 4
-
Tile 1 × 2 with Groove × 4
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced × 4
-
Brick 1 × 3 × 4
-
Minifig Head Skeleton, Standard Skull Print No longer produced · last seen 2013 × 4
-
Technic Plate 2 × 4 [3 Holes] × 4![Technic Plate 2 × 4 [3 Holes] White](/media/parts/3709/15/technic-plate-2-x-4-3-holes-white.jpg)
-
Technic Pin 1/2 without Friction Ridges × 4
-
Brick Sloped 33° 3 × 1 × 4
-
Plate 1 × 10 No longer produced · last seen 2011 × 4
-
Plate Round Corner 6 × 6 × 4
-
Panel 1 × 1 × 1 Corner × 4
-
Technic Brick 1 × 1 with Pin Hole × 4
-
Panel 3 × 4 × 6 with Arched Window No longer produced · last seen 2016 × 4
-
Technic Axle and Pin Connector Angled #1 × 4
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small × 4
-
Light Cover 1 × 1 Round with Internal Bar / Bionicle Barraki Eye × 4
-
Technic Pin 1/2 with 2L Bar Extension × 4
-
Door Grill 1 × 4 × 6 No longer produced · last seen 2024 × 4
-
Plate Round 2 × 2 with Rounded Bottom [Boat Stud] × 3![Plate Round 2 × 2 with Rounded Bottom [Boat Stud] Red](/media/parts/2654/4/plate-round-2-x-2-with-rounded-bottom-boat-stud-red.jpg)
-
Brick 2 × 4 × 3
-
Plate 4 × 6 × 3
-
Tile 1 × 2 with Groove × 3
-
Tile 1 × 2 with Groove × 3
-
Technic Brick 1 × 4 [3 Pin Holes] × 3![Technic Brick 1 × 4 [3 Pin Holes] Black](/media/parts/3701/0/technic-brick-1-x-4-3-pin-holes-black.jpg)
-
Brick Round 2 × 2 with Axle Hole × 3
-
Brick Round 2 × 2 with Axle Hole × 3
-
Wedge Plate 3 × 2 Right × 3
-
Wedge Plate 3 × 2 Left × 3
-
Plate Round 4 × 4 with Pin Hole × 3
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (11)
These extra parts come with the set in case one gets lost.
-
Plate Round 1 × 1 with Solid Stud × 4
-
Technic Pin with Friction Ridges Lengthwise and Center Slots No longer produced · last seen 2021 × 2
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced × 1
-
Technic Bush × 1
-
Technic Pin 1/2 without Friction Ridges × 1
-
Technic Pin 1/2 without Friction Ridges × 1
-
Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] No longer produced · last seen 2023 × 1![Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] Dark Bluish Gray](/media/parts/48729b/72/bar-1l-with-clip-cut-edges-and-one-side-hole-gap-in-clip-dark-bluish-gray.jpg)
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small × 1
-
Flame / Headwear Accessory Plume / Feather, Triple Point No longer produced · last seen 2020 × 1
-
Weapon Throwing Star / Shuriken with Smooth Grips No longer produced · last seen 2014 × 1
-
Arm Skeleton Bent with Clips at 90° [Vertical Grip] × 1![Arm Skeleton Bent with Clips at 90° [Vertical Grip] White](/media/parts/93061/15/arm-skeleton-bent-with-clips-at-90-vertical-grip-white.jpg)
Minifigures 6
-
Lord Garmadon (The Golden Weapons)
× 1
-
Kai (The Golden Weapons)
× 1
-
Nya (The Golden Weapons)
× 1
-
Bonezai - 3626b Head
× 1
-
Samukai
× 1
-
Chopov
× 1
Description
Where the story sits
This set dates from 2011, when Ninjago was still finding its feet as a theme. It centres on Lord Garmadon, the ninja's main opponent, and the hideout he retreats to. At 518 pieces it sits in the mid-sized range: big enough for a multi-level structure, yet still manageable in a single afternoon. If you collect the early Ninjago sets, the fortress gives you a backdrop that pairs nicely with the vehicles and figures from that first wave. For collectors who have followed Ninjago from the start, the fortress is a piece of the theme's history that is still fun to rebuild today.
A restrained colour scheme
The palette is unusually restrained. White and black dominate, supported by light and dark bluish grey, which gives the fortress its cold, menacing look. It also makes the pieces useful far beyond this model, because grey and black bricks turn up in almost every castle, base or spaceship build. With 133 different part types, the build offers enough variety that you are not just stacking the same basic bricks over and over again. If you like walls and towers in pale grey and black, you also get many plates and angled bricks that can be combined flexibly.
Six figures, plenty of play
Six minifigures is a generous crew for a Ninjago set of this period. It is enough to stage a proper showdown with several characters in action at once. That makes the fortress more of a playset than a pure display piece, with towers, hiding places and narrow passages made for chases and ambushes. If you would rather display it, you can pose the figures on the walls and treat the building as the centrepiece of a small Ninjago shelf. The figures can be tucked away inside the towers and passages, so every game plays out differently and the layout keeps surprising you.
Checking and reusing the bricks
This page lists every part with its colour and quantity, which is handy if a piece has gone missing or you are buying the set second-hand and want to check the contents. Use “What can I build?” to see which other models you could put together from this set combined with your own collection. The many grey and black elements in particular are easy to reuse in your own castles, fortresses and vehicles. That turns a single set into a stock of parts for castles, strongholds and gloomy scenery that you can reshape however you like.
FAQ
- How many pieces and minifigures does the set include?
- It has 518 pieces across 133 different part types and 6 minifigures. The set was released in 2011 as part of Ninjago.
- Is it better for play or for display?
- Both work. The levels and six figures make it fun to play with, while the stark white, black and grey look holds up on a shelf too.
- Can I reuse the bricks in other builds?
- Yes, especially the grey and black parts, which suit all sorts of models. The parts list shows exactly what is in the box.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



