
Parts list 184
-
Plate Special 1 × 2 with 1 Stud with Groove (Jumper) No longer produced · last seen 2015 × 23
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) No longer produced · last seen 2016 × 23
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) No longer produced · last seen 2024 × 18
-
Plate Special 2 × 2 with Groove and Center Stud (Jumper) × 18
-
Plate Round 1 × 1 with Solid Stud × 16
-
Hinge Plate 1 × 4 Swivel Top / Base - Solid Clip [Complete Assembly] No longer produced · last seen 2024 × 16![Hinge Plate 1 × 4 Swivel Top / Base - Solid Clip [Complete Assembly] Black](/media/parts/73983/0/hinge-plate-1-x-4-swivel-top-base-solid-clip-complete-assembly-black.jpg)
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small × 12
-
Cone 1 × 1 [Top Groove] × 12![Cone 1 × 1 [Top Groove] White](/media/parts/59900/15/cone-1-x-1-top-groove-white.jpg)
-
Plate 2 × 3 × 10
-
Plate 1 × 6 × 10
-
Technic Brick 1 × 1 with Pin Hole × 10
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 10
-
Brick Sloped 45° 2 × 2 × 9
-
Plate 1 × 2 × 8
-
Brick Round 2 × 2 Dome Top, Blocked Open Stud, Bottom Axle Holder No longer produced · last seen 2014 × 8
-
Tile 1 × 6 with Groove × 8
-
Plate Special 2 × 16 with Angled Side Extensions and Hole (Rotor Blade) No longer produced · last seen 2011 × 8
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium × 8
-
Brick Sloped 45° 2 × 1 Double / Inverted with Bottom Stud Holder × 7
-
Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction × 7
-
Plate 2 × 2 × 6
-
Hinge Brick 1 × 2 Locking with 1 Finger Vertical End and 2 Fingers Vertical End, 9 Teeth No longer produced · last seen 2020 × 6
-
Brick Wedged, Sloped 45° 2 × 4 Triple No longer produced · last seen 2011 × 6
-
Arm Mechanical with Clip [Thin Support] No longer produced · last seen 2014 × 6![Arm Mechanical with Clip [Thin Support] Black](/media/parts/53989/0/arm-mechanical-with-clip-thin-support-black.jpg)
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium No longer produced · last seen 2015 × 6
-
Plate 2 × 4 × 5
-
Technic Axle 2 Notched × 5
-
Technic Brick 1 × 2 with Axle Hole Type 2 [X Opening] No longer produced · last seen 2014 × 5![Technic Brick 1 × 2 with Axle Hole Type 2 [X Opening] Light Bluish Gray](/media/parts/32064b/71/technic-brick-1-x-2-with-axle-hole-type-2-x-opening-light-bluish-gray.jpg)
-
Technic Brick Special 2 × 2 with Pin Hole, Rotation Joint Socket × 5
-
Tile Special 1 × 2 with Handle × 4
-
Tile Special 1 × 1 with Clip and Straight Tips No longer produced · last seen 2014 × 4
-
Brick 1 × 2 × 4
-
Plate 1 × 2 × 4
-
Plate 4 × 4 × 4
-
Plate 1 × 3 × 4
-
Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] × 4![Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] Dark Bluish Gray](/media/parts/3660/72/brick-sloped-inverted-45-2-x-2-ovoid-bottom-pin-bar-sized-stud-holes-dark-bluish-gray.jpg)
-
Plate Round 1 × 1 with Solid Stud × 4
-
Bar 4L (Lightsaber Blade / Wand) × 4
-
Technic Axle and Pin Connector Angled #5 - 112.5° × 4
-
Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] No longer produced · last seen 2021 × 4![Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] Black](/media/parts/32054/0/technic-pin-long-with-friction-ridges-lengthwise-and-stop-bush-3-lateral-holes-big-pin-hole-black.jpg)
-
Minifig Head Skeleton, Skull, Evil with Scowl Black Print, Red Eyes Print [Blocked Open Stud] No longer produced · last seen 2011 × 4![Minifig Head Skeleton, Skull, Evil with Scowl Black Print, Red Eyes Print [Blocked Open Stud] White](/media/parts/3626bpr0494/15/minifig-head-skeleton-skull-evil-with-scowl-black-print-red-eyes-print-blocked-open-stud-white.jpg)
-
Plate Round 2 × 2 with Axle Hole Type 1 (+ Opening) × 4
-
Wedge Plate 3 × 2 Right × 4
-
Wedge Plate 3 × 2 Left × 4
-
Hinge Plate 1 × 2 Locking with 1 Finger On End, with Groove No longer produced · last seen 2013 × 4
-
Brick Curved 3 × 1 No Studs × 4
-
Brick Special 1 × 2 with Studs on 2 Sides × 4
-
Large Figure Foot, Claw, Piraka No longer produced · last seen 2014 × 4
-
Arm Mechanical with Clip [Thin Support] No longer produced · last seen 2013 × 4![Arm Mechanical with Clip [Thin Support] White](/media/parts/53989/15/arm-mechanical-with-clip-thin-support-white.jpg)
-
Technic Axle Connector Hub with 3 Axles at 120° × 4
-
Hinge Plate 1 × 12 Locking with Angled Side Extensions and Tapered Ends, 7 Teeth × 4
-
Technic Brick Special 2 × 2 with 10.2mm Balls [Center Mold Indention] No longer produced · last seen 2014 × 4![Technic Brick Special 2 × 2 with 10.2mm Balls [Center Mold Indention] Dark Bluish Gray](/media/parts/57908/72/technic-brick-special-2-x-2-with-102mm-balls-center-mold-indention-dark-bluish-gray.jpg)
-
Technic Pin 1/2 with 2L Bar Extension × 4
-
Brick Sloped 18° 2 × 1 × 2/3 with 4 Slots / Grate × 4
-
Plate Special 1 × 2 with Clip Horizontal on End × 4
-
Weapon Lightsaber Hilt with Bottom Ring × 4
-
Weapon Spike Flexible 3.5L × 4
-
Technic Axle Connector 2 × 3 with Ball Socket [Closed Sides, Squared Ends, Open Lower Axle Holes] No longer produced · last seen 2011 × 4![Technic Axle Connector 2 × 3 with Ball Socket [Closed Sides, Squared Ends, Open Lower Axle Holes] Dark Bluish Gray](/media/parts/89652/72/technic-axle-connector-2-x-3-with-ball-socket-closed-sides-squared-ends-open-lower-axle-holes-dark-bluish-gray.jpg)
-
Technic Brick Special 2 × 2 with Ball Socket Wide and Axle Hole No longer produced · last seen 2021 × 4
-
Bracket 1 × 2 - 1 × 4 [Square Corners] No longer produced · last seen 2014 × 3![Bracket 1 × 2 - 1 × 4 [Square Corners] White](/media/parts/2436/15/bracket-1-x-2-1-x-4-square-corners-white.jpg)
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (15)
These extra parts come with the set in case one gets lost.
-
Plate Round 1 × 1 with Solid Stud × 2
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) No longer produced · last seen 2016 × 2
-
Headwear Accessory Glasses / Goggles × 1
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced × 1
-
Technic Gear 8 Tooth No longer produced · last seen 2013 × 1
-
Technic Pin 1/2 without Friction Ridges × 1
-
Pneumatic T-Piece (T Bar) [New Style] × 1![Pneumatic T-Piece (T Bar) [New Style] Light Bluish Gray](/media/parts/4697b/71/pneumatic-t-piece-t-bar-new-style-light-bluish-gray.jpg)
-
Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] × 1![Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] Black](/media/parts/48729b/0/bar-1l-with-clip-cut-edges-and-one-side-hole-gap-in-clip-black.jpg)
-
Plate Round 1 × 1 with Solid Stud × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) No longer produced · last seen 2024 × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
-
Arm Skeleton Bent with Clips at 90° [Vertical Grip] × 1![Arm Skeleton Bent with Clips at 90° [Vertical Grip] White](/media/parts/93061/15/arm-skeleton-bent-with-clips-at-90-vertical-grip-white.jpg)
Minifigures 4
Description
Early Ninjago action
This set belongs to the early wave of the Ninjago range, in which ninja warriors face rivals and mythical creatures. A dragon sits at the centre of the scene, and four minifigures make sure both sides are represented. At 645 pieces the model is bigger than many small battle sets, yet still manageable to build in a sitting or two. Fans of Ninjago get a scene that promises action as soon as the last brick is pressed on.
Dark tones and strong contrast
Black, white, dark blue and dark bluish grey dominate the look. It feels moody, which suits a battle full of lightning. The pale white elements add accents and stop the model from looking too heavy. For your own ideas these colours are valuable: black and dark grey are among the most used shades when you build vehicles, castles or robots and want a bold, unified appearance in the finished model.
154 different parts
The parts list contains 154 different elements, a high figure compared with the total, because the dragon, the weapons and the scenery all call for distinct shapes. The build stays varied but benefits from a little order. It is wise to sort the small special pieces into a bowl first. That way you find joints and accessories faster later and do not lose track of individual components while playing or rebuilding sections of the model.
Building on from here
If you already own the set, the “What can I build?” tool on this page shows which other models your bricks could become. That gets especially interesting when you have several Ninjago sets and are planning a larger scene. The parts list also lets you check a second-hand copy for completeness. The dragon does not have to stay in one shape forever, and can become the starting point for entirely new creatures and vehicles.
FAQ
- How many pieces and minifigures does set 2521 have?
- It has 645 pieces, 154 of them different, and 4 minifigures. It was released in 2011 in the Ninjago theme.
- Is it more for play or for display?
- It is mainly a play set, but with the dragon it also works well as a standing scene.
- Can I use the parts for something else?
- Yes, the dark colours suit vehicles and castles. The “What can I build?” section shows matching options.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



