
LEGO® Super Racer
The Super Racer belongs to the Creator 3-in-1 line and came out in 2013 with 121 pieces. The same bricks can make several models, and no minifigures are included.
- Set number
- 31002
- Year
- 2013
- Pieces
- 121
- Minifigures
- 0
- Theme
- Creator 3-in-1
- Different parts
- 50
Parts list 50
-
Brick Curved 4 × 1 No Studs [Stud Holder with Symmetric Ridges] × 6![Brick Curved 4 × 1 No Studs [Stud Holder with Symmetric Ridges] Yellow](/media/parts/11153/14/brick-curved-4-x-1-no-studs-stud-holder-with-symmetric-ridges-yellow.jpg)
-
Plate 2 × 4 × 4
-
Plate 2 × 3 × 4
-
Plate 1 × 2 × 4
-
Tile 1 × 2 with Groove × 4
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced × 4
-
Technic Brick 1 × 4 [3 Pin Holes] × 4![Technic Brick 1 × 4 [3 Pin Holes] Yellow](/media/parts/3701/14/technic-brick-1-x-4-3-pin-holes-yellow.jpg)
-
Technic Bush × 4
-
Plate Round 1 × 1 with Solid Stud × 4
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 4
-
Wheel 18mm x 14mm with Axle Hole, Fake Bolts and Shallow Spokes × 4
-
Tyre 30.4 × 14 VR Solid × 4
-
Brick Sloped 18° 2 × 1 × 2/3 with 4 Slots / Grate × 4
-
Bracket 1 × 2 - 1 × 2 Inverted × 4
-
Bracket 1 × 2 - 1 × 2 × 4
-
Plate 2 × 3 × 3
-
Plate 2 × 2 Corner × 2
-
Tile 1 × 4 with Groove × 2
-
Plate 2 × 2 × 2
-
Plate 2 × 2 × 2
-
Plate 1 × 2 × 2
-
Plate 1 × 1 × 2
-
Plate 2 × 8 × 2
-
Brick Sloped Inverted 45° 2 × 1 × 2
-
Technic Axle 8 × 2
-
Plate 1 × 4 × 2
-
Panel 1 × 1 × 1 Corner × 2
-
Brick Curved 4 × 1 No Studs [Stud Holder with Symmetric Ridges] × 2![Brick Curved 4 × 1 No Studs [Stud Holder with Symmetric Ridges] Red](/media/parts/11153/4/brick-curved-4-x-1-no-studs-stud-holder-with-symmetric-ridges-red.jpg)
-
Brick Curved 4 × 1 No Studs [Stud Holder with Symmetric Ridges] × 2![Brick Curved 4 × 1 No Studs [Stud Holder with Symmetric Ridges] White](/media/parts/11153/15/brick-curved-4-x-1-no-studs-stud-holder-with-symmetric-ridges-white.jpg)
-
Brick Sloped 45° 2 × 1 with Bottom Pin × 2
-
Brick Special 1 × 4 with 4 Studs on One Side × 2
-
Tile 2 × 2 with Groove × 2
-
Plate Special 1 × 1 with Clip Light, Bar Hole [Thick Ring] × 2![Plate Special 1 × 1 with Clip Light, Bar Hole [Thick Ring] Light Bluish Gray](/media/parts/4081b/71/plate-special-1-x-1-with-clip-light-bar-hole-thick-ring-light-bluish-gray.jpg)
-
Brick Sloped Inverted 33° 3 × 1 with Internal Stopper and No Front Stud Connection × 2
-
Panel 1 × 2 × 1 [Rounded Corners] × 2![Panel 1 × 2 × 1 [Rounded Corners] Black](/media/parts/4865b/0/panel-1-x-2-x-1-rounded-corners-black.jpg)
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 2
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 2
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 2
-
Plate Special 1 × 2 Side Handle [Free Ends] × 1![Plate Special 1 × 2 Side Handle [Free Ends] Dark Bluish Gray](/media/parts/2540/72/plate-special-1-x-2-side-handle-free-ends-dark-bluish-gray.jpg)
-
Brick 1 × 4 × 1
-
Plate 4 × 6 × 1
-
Plate 1 × 6 × 1
-
Plate 2 × 6 × 1
-
Tile 1 × 8 with Groove × 1
-
Plate 2 × 16 × 1
-
Steering Wheel Small, 2 × 2 No longer produced · last seen 2014 × 1
-
Wedge Plate 4 × 2 Right × 1
-
Wedge Plate 4 × 2 Left × 1
-
Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] No longer produced · last seen 2024 × 1![Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] Light Bluish Gray](/media/parts/48729b/71/bar-1l-with-clip-cut-edges-and-one-side-hole-gap-in-clip-light-bluish-gray.jpg)
-
Wedge Plate 2 × 4 × 1
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (9)
These extra parts come with the set in case one gets lost.
-
Plate 1 × 1 × 1
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced × 1
-
Technic Bush × 1
-
Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] No longer produced · last seen 2024 × 1![Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] Light Bluish Gray](/media/parts/48729b/71/bar-1l-with-clip-cut-edges-and-one-side-hole-gap-in-clip-light-bluish-gray.jpg)
-
Plate Round 1 × 1 with Solid Stud × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
Alternative models
A 3-in-1 set: the official LEGO® building instructions contain three models you can build from the same parts. View the official building instructions at LEGO® ↗
Fan models by Rebrickable users that you can build (mostly) from this set’s parts. Instructions are available from the designers.
- 31002-D Tuk-Tuk
- 31002 Postapo Speedster
- 31002: Lawn Mower
- 31002 Race Buggy
- 31002 - Stellar bomber
- 31002 Starfighter
- 31002 Fighter
- cart
Description
One car, several options
The Creator range is built around sets that can become more than one model. The Super Racer is a small example of that idea: 121 pieces are enough for a low sports car and for rebuilds that come from the same bricks. For such a compact set that is a good reason not to stop after the first model, but to use the parts a second time straight away and see what else is possible.
Yellow, grey, white, black
The palette is yellow, light bluish grey, white and black. That gives the classic look of a racing car, with a bold body and dark wheels. What stands out is the variety: 42 different parts among only 121 elements means many shapes appear just once. That keeps the build interesting but asks for a little care when sorting, so that nothing goes missing or is left lying on the table at the end.
Built to be driven
This model is meant to be rolled and pushed along, not only put on a shelf. With no minifigure, the focus is on the vehicle itself: its shape, wheels and structure. For children the size is a good step towards more compact technical models, and for adults it is a short build for an evening. You can look up each individual part in the list on this page if something is missing after a rebuild.
Building on with your own bricks
If you already own several small sets, the “What can I build?” tool shows which models you can put together from your existing parts, including this racer. The set was released in 2013 and is not on sale everywhere any more. If you buy it second-hand, go through the parts list carefully, especially the many single-use shapes and the yellow body elements. Older Creator sets are also a good source of wheels, axles and curved body panels that many other projects need.
FAQ
- How many pieces are in the Super Racer?
- Set 31002-1 has 121 pieces in 42 different types. It does not include a minifigure.
- What does Creator 3-in-1 mean?
- The parts of one set can be rebuilt into further models after the main instructions. One box therefore gives you several building projects.
- Can I look up missing parts?
- Yes, the full parts list with colours is on this page. It helps you see quickly which bricks are missing from a second-hand set.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



