
LEGO® Turbo Quad
The Turbo Quad is a 2014 Creator 3-in-1 set with 186 pieces and no minifigures. As the range promises, the same bricks can make several different models.
- Set number
- 31022
- Year
- 2014
- Pieces
- 186
- Minifigures
- 0
- Theme
- Creator 3-in-1
- Different parts
- 79
Parts list 79
-
Plate 2 × 3 × 8
-
Technic Bush × 8
-
Plate Round 2 × 2 with Axle Hole Type 1 (+ Opening) × 5
-
Tile Special 1 × 2 Grille with Bottom Groove × 4
-
Plate 2 × 3 × 4
-
Plate 1 × 2 × 4
-
Brick Arch 1 × 3 × 2 Curved Top × 4
-
Brick Curved 1 × 2 × 1 1/3 with Curved Top × 4
-
Brick Curved 4 × 1 No Studs [Stud Holder with Symmetric Ridges] × 4![Brick Curved 4 × 1 No Studs [Stud Holder with Symmetric Ridges] Yellow](/media/parts/11153/14/brick-curved-4-x-1-no-studs-stud-holder-with-symmetric-ridges-yellow.jpg)
-
Brick Curved 2 × 1 No Studs [1/2 Bow] × 4![Brick Curved 2 × 1 No Studs [1/2 Bow] Yellow](/media/parts/11477/14/brick-curved-2-x-1-no-studs-12-bow-yellow.jpg)
-
Brick Curved 2 × 1 No Studs [1/2 Bow] × 4![Brick Curved 2 × 1 No Studs [1/2 Bow] Light Bluish Gray](/media/parts/11477/71/brick-curved-2-x-1-no-studs-12-bow-light-bluish-gray.jpg)
-
Technic Axle Pin with Friction Ridges Lengthwise × 4
-
Tyre 56 × 26 Balloon × 4
-
Wheel 30.4 × 20 without Pinholes, with Reinforced Rim × 4
-
Technic Axle Connector Smooth [with x Hole + Orientation] × 4![Technic Axle Connector Smooth [with x Hole + Orientation] Black](/media/parts/59443/0/technic-axle-connector-smooth-with-x-hole-orientation-black.jpg)
-
Bracket 1 × 2 - 2 × 2 Inverted × 4
-
Plate 1 × 2 × 3
-
Technic Brick 1 × 2 [2 Pin Holes] × 3![Technic Brick 1 × 2 [2 Pin Holes] Dark Bluish Gray](/media/parts/32000/72/technic-brick-1-x-2-2-pin-holes-dark-bluish-gray.jpg)
-
Technic Brick 1 × 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin × 3![Technic Brick 1 × 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin Light Bluish Gray](/media/parts/32064a/71/technic-brick-1-x-2-with-axle-hole-type-1-opening-and-bottom-pin-light-bluish-gray.jpg)
-
Bracket 1 × 2 - 1 × 2 Inverted × 3
-
Plate 2 × 2 Corner × 2
-
Technic Pin with Friction Ridges Lengthwise and Center Slots No longer produced · last seen 2021 × 2
-
Brick 1 × 2 × 2
-
Plate 2 × 4 × 2
-
Plate 2 × 2 × 2
-
Plate 1 × 2 × 2
-
Plate 1 × 2 × 2
-
Plate 2 × 8 × 2
-
Plate 1 × 8 × 2
-
Plate 1 × 3 × 2
-
Brick Sloped Inverted 45° 2 × 1 × 2
-
Technic Pin without Friction Ridges Lengthwise × 2
-
Plate 2 × 6 × 2
-
Technic Axle 3 × 2
-
Dish 2 × 2 Inverted [Radar] × 2![Dish 2 × 2 Inverted [Radar] Dark Bluish Gray](/media/parts/4740/72/dish-2-x-2-inverted-radar-dark-bluish-gray.jpg)
-
Plate Round 1 × 1 with Solid Stud × 2
-
Plate Round 1 × 1 with Solid Stud × 2
-
Technic Brick 1 × 1 with Pin Hole × 2
-
Bracket 1 × 2 - 1 × 4 [Rounded Corners] No longer produced · last seen 2019 × 2![Bracket 1 × 2 - 1 × 4 [Rounded Corners] Light Bluish Gray](/media/parts/10201/71/bracket-1-x-2-1-x-4-rounded-corners-light-bluish-gray.jpg)
-
Brick Special 1 × 2 with 2 Studs on 1 Side × 2
-
Plate Special 1 × 2 with Pin Hole on Top × 2
-
Brick Curved 2 × 1 No Studs [1/2 Bow] × 2![Brick Curved 2 × 1 No Studs [1/2 Bow] White](/media/parts/11477/15/brick-curved-2-x-1-no-studs-12-bow-white.jpg)
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) × 2
-
Hinge Plate 1 × 2 Locking with 1 Finger On Top × 2
-
Hinge Cylinder 1 × 2 Locking with 2 Click Fingers and Axle Hole, 9 Teeth No longer produced · last seen 2020 × 2
-
Brick Round 1 × 1 Open Stud × 2
-
Technic Axle 2 Notched × 2
-
Technic Beam 1 × 9 Bent (7 - 3) Thick No longer produced · last seen 2022 × 2
-
Technic Tooth 1 × 3 with Axle Hole [Rounded Underside] No longer produced · last seen 2019 × 2![Technic Tooth 1 × 3 with Axle Hole [Rounded Underside] Trans-Clear](/media/parts/41669/47/technic-tooth-1-x-3-with-axle-hole-rounded-underside-trans-clear.jpg)
-
Brick Sloped Inverted 33° 3 × 1 with Internal Stopper and No Front Stud Connection × 2
-
Wedge Plate 3 × 2 Right × 2
-
Wedge Plate 3 × 2 Left × 2
-
Technic Beam 1 × 2 Thick × 2
-
Bracket 1 × 2 - 2 × 2 × 2
-
Plate Special 1 × 2 [Side Handle Closed Ends] × 2![Plate Special 1 × 2 [Side Handle Closed Ends] Light Bluish Gray](/media/parts/48336/71/plate-special-1-x-2-side-handle-closed-ends-light-bluish-gray.jpg)
-
Technic Axle 5.5 with Stop [Rounded Short End] × 2![Technic Axle 5.5 with Stop [Rounded Short End] Dark Bluish Gray](/media/parts/59426/72/technic-axle-55-with-stop-rounded-short-end-dark-bluish-gray.jpg)
-
Tile 1 × 3 × 2
-
Plate Special 4 × 4 with 2 × 2 Opening × 2
-
Technic Axle 4 with Stop × 2
-
Plate Special 1 × 2 with Bar Up [Horizontal Arm 5mm] × 2![Plate Special 1 × 2 with Bar Up [Horizontal Arm 5mm] Black](/media/parts/88072/0/plate-special-1-x-2-with-bar-up-horizontal-arm-5mm-black.jpg)
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (5)
These extra parts come with the set in case one gets lost.
Alternative models
A 3-in-1 set: the official LEGO® building instructions contain three models you can build from the same parts. View the official building instructions at LEGO® ↗
Fan models by Rebrickable users that you can build (mostly) from this set’s parts. Instructions are available from the designers.
What can I build with it?Description
Grey bodywork, yellow punch
Light and dark bluish grey form the bodywork, yellow adds accents and black takes care of tyres and details. The mix is sober but eye-catching and recalls real racing machines. The colours are very versatile as well: they suit almost any other set and combine easily into vehicles of your own. Anyone who thinks about colour will soon notice that a few yellow parts on a mostly grey model do more than a lot of bright elements.
One vehicle, several options
The idea behind Creator 3-in-1 is simple: one set of bricks makes three different models, depending on the instructions. The Turbo Quad is the main model, a small, quick off-road vehicle with fat tyres and a robust look. If you do not want the set to gather dust after the first build, two alternatives are waiting in the background. At 186 pieces the effort stays reasonable, so switching between variants will not swallow the whole afternoon.
No figures, lots of freedom
No minifigures are included, so the set is more of a building project than a play set with a story. That has advantages: you decide who drives, and the focus lies entirely on the vehicle. With 71 different parts among the 186 pieces there is a good choice of wheels, plates and trim. The parts list on this page helps you check that a used box is complete before you buy the set or swap it for something else.
Using the bricks again
If you already have the parts, Bricoria can show you what else can be built besides the three original models. Add the set to your collection and use What Can I Build for suggestions that come from your own bricks. In a Creator set with so many wheels and plates, the mix of parts holds more potential than the instructions reveal. That is why this 2014 set stays interesting long after the first build is finished and the box has gone away.
FAQ
- Does the Turbo Quad include minifigures?
- No, the set has no minifigures. It consists of 186 pieces, 71 of them different elements.
- What does 3-in-1 mean?
- The same bricks can be built into three different models, each with its own instructions.
- When was the set released?
- The Turbo Quad came out in 2014 in the Creator 3-in-1 range.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



