
Deep Sea Creatures
Deep Sea Creatures is a Creator 3-in-1 set, meaning the same 230 pieces can be rebuilt into three different deep-sea animal models rather than just one. There are no minifigures included, since the focus sits entirely on the creature builds themselves. The parts list on this page covers all 83 distinct elements shared across those alternate builds.
- Set number
- 31088
- Year
- 2019
- Pieces
- 230
- Minifigures
- 0
- Theme
- Creator 3-in-1
- Different parts
- 83
Parts list 83
-
Brick Sloped 45° 2 × 1 with 2/3 Cutout [New Version]
× 16
-
Plate Special 1 × 2 with Three Teeth [Tri-Tooth]
× 8
-
Plate 1 × 2
× 7
-
Plate 1 × 2
× 6
-
Plate 1 × 1
× 6
-
Plate 1 × 3
× 6
-
Bar Holder with Clip
× 6
-
Brick Special 1 × 1 with Studs on 2 Adjacent Sides
× 6
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small
× 6
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 6
-
Plate 1 × 6
× 5
-
Brick Curved 2 × 1 No Studs [1/2 Bow]
× 5
-
Plate Special 1 × 2 with 5.9mm Centre Side Towball
× 5
-
Plate Special 1 × 2 5.9mm Towball Socket
× 5
-
Plate Round 2 × 2 with Axle Hole Type 1 (+ Opening)
× 5
-
Brick Sloped 30° 1 × 2 × 2/3
× 5
-
Brick Curved 4 × 1 No Studs [Stud Holder with Symmetric Ridges]
× 4
-
Plate Special 1 × 2 5.9mm Centre Side Towball Socket
× 4
-
Brick Curved 2 × 2 × 2/3
× 4
-
Plate Special 2 × 2 with Towball and Hole
× 4
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
× 4
-
Creature Body Part, Barb Large (Claw, Talon) with Clip
× 4
-
Plate Special 1 × 2 with Handle on End [Closed Ends]
× 4
-
Plate 2 × 4
× 3
-
Plate 2 × 2
× 3
-
Brick Wedged, Curved 2 × 1 with Stud Notch Right
× 3
-
Brick Wedged, Curved 2 × 1 with Stud Notch Left
× 3
-
Brick Sloped 45° 2 × 1 with Bottom Pin
× 3
-
Tile 2 × 2 with Groove
× 3
-
Plate Round 1 × 1 with Solid Stud
× 3
-
Bracket 1 × 2 - 2 × 2
× 3
-
Wedge Plate 3 × 3 Cut Corner
× 2
-
Plate Special 1 × 2 Side Handle [Free Ends]
× 2
-
Plate Special 1 × 2 Side Handle [Free Ends]
× 2
-
Technic Pin with Friction Ridges Lengthwise and Center Slots
No longer produced · last seen 2021
× 2
-
Brick 1 × 2
× 2
-
Brick 1 × 6
× 2
-
Plate 2 × 4
× 2
-
Plate 2 × 3
× 2
-
Plate 2 × 2
× 2
-
Plate 2 × 2
× 2
-
Plate 1 × 6
× 2
-
Plate 1 × 4
× 2
-
Dish 2 × 2 Inverted [Radar]
No longer produced · last seen 2022
× 2
-
Technic Brick 1 × 1 with Pin Hole
× 2
-
Technic Pin Connector Round 1L [Beam]
× 2
-
Brick Special 1 × 2 × 1 2/3 with 4 Studs on 1 Side
× 2
-
Brick Special 1 × 1 × 1 2/3 with Studs on 1 Side
× 2
-
Plate Round 2 × 2 with Axle Hole Type 1 (+ Opening)
× 2
-
Brick Curved Inverted 6 × 1
× 2
-
Brick Sloped 65° 2 × 1 × 2
× 2
-
Flag 2 × 2 Trapezoid with Flared Area between Clips
No longer produced · last seen 2021
× 2
-
Tile Round 1 × 1 with Squinted Eye, Top Side Pupil print
No longer produced · last seen 2021
× 2
-
Bracket 1 × 2 - 2 × 2 Inverted
× 2
-
Equipment Goblet / Glass
× 1
-
Plate Round 2 × 2 with Rounded Bottom [Boat Stud]
× 1
-
Brick 2 × 4
× 1
-
Brick 1 × 1
× 1
-
Plate 2 × 4
× 1
-
Plate 2 × 6
× 1
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (8)
These extra parts come with the set in case one gets lost.
-
Technic Pin with Friction Ridges Lengthwise and Center Slots
No longer produced · last seen 2021
× 1
-
Plate 1 × 1
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Technic Pin Connector Round 1L [Beam]
× 1
-
Rock 1 × 1 Jewel / Gem 24 Facet
No longer produced · last seen 2022
× 1
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small
× 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 1
-
Tile Round 1 × 1 with Squinted Eye, Top Side Pupil print
No longer produced · last seen 2021
× 1
Alternative models
A 3-in-1 set: the official LEGO® building instructions contain three models you can build from the same parts. View the official building instructions at LEGO® ↗
Fan models by Rebrickable users that you can build (mostly) from this set’s parts. Instructions are available from the designers.
- Bearshark - Deep Sea Creatures 31088 alternate build
- Thundertank Transformer from LEGO Creator set 31088: Deep Sea Creatures
- Lego Greninja! 31088 Alternate Build/MOC With Video Instructions
- Transformer Insect/Insecticon Shrapnel from LEGO Creator set 31088: Deep Sea Creatures
- Werewolf 31088 Alternate Build/MOC With Video Instructions
- Lego Mettaton EX, 31088 Alternate Build/MOC With Video Instructions
- Lego Santa! 31088 Alternate Build/MOC With Video Instructions
- Transformer Excavator from LEGO Creator set 31088
- Transformer Armada Tank from LEGO Creator set 31088: Deep Sea Creatures
- 31088 Alternative Build 11 in 1 | 11 MOCs
- Wicked the Whale 31088
- Transformers Hovercraft from Creator 31088
All 410 ideas at Rebrickable ↗
What can I build with it?Description
Specialised parts for organic shapes
83 of the 230 pieces are distinct elements, a high ratio for an animal set and a direct result of the specialised shaped pieces needed for organic forms such as fins, tentacles or shell plates. That variety is part of what makes 3-in-1 animal sets interesting to build: the same collection of parts has to work across three quite different creature shapes, which pushes the design toward flexible, reusable piece choices rather than one-off custom parts. That flexibility is part of what makes the set interesting to revisit rather than shelve after a single build.
One palette, three creatures
Dark blue forms the base colour across the build, standing in for water and body sections, while red supplies bold accents similar to the warning or lure colouring seen on many real deep-sea animals, and white and light bluish grey add lighter contrast and detailing. Because the palette isn't tied to a single creature, it works across all three possible builds rather than needing to be reworked between them. The parts list on this page shows the exact colour breakdown.
No minifigures, just the model
With no minifigures included, the set is built purely around the creature model and the technique used to shape it, which suits builders more interested in construction solutions than roleplay scenes. That makes it a reasonable choice as a display piece, since the finished animal can simply sit on a shelf and be rebuilt into a different creature whenever the mood strikes rather than needing figures or a scene around it.
Nothing extra needed to rebuild
Because all three alternate models come from the same 230 pieces, nothing extra needs to be bought to try a different build once the first one is finished. The full parts list on this page is useful for identifying specific shaped pieces, whether that's to track down a missing part or to pull fins, tentacles or shell pieces for other creative builds entirely separate from this set.
FAQ
- What does '3-in-1' mean for this set?
- The same 230 pieces can be rebuilt into three different deep-sea creature models.
- Does the set include minifigures?
- No, there are no minifigures; the focus is entirely on the animal build.
- How many pieces and distinct elements does it have?
- 230 pieces with 83 distinct elements.



