
Off-road Buggy
As a Creator 3-in-1 set, 31123 can be rebuilt into three different vehicle variants using the same 160 pieces, with no extra parts required for any version.
- Set number
- 31123
- Year
- 2022
- Pieces
- 160
- Minifigures
- 0
- Theme
- Creator 3-in-1
- Different parts
- 70
Parts list 70
-
Plate 1 × 2
× 4
-
Technic Bush
× 4
-
Technic Axle Pin without Friction Ridges Lengthwise
× 4
-
Technic Pin 1/2 without Friction Ridges
× 4
-
Plate Round 1 × 1 with Solid Stud
× 4
-
Plate Special 2 × 2 with 1 Pin Hole [Complete Underside Rib]
× 4
-
Technic Pin Connector Plate 1 × 2 × 1 2/3 [Two Holes On Top]
× 4
-
Plate Special Round 1 × 1 with Hollow Stud and Horizontal Bar 1L
× 4
-
Plate Special 1 × 2, Top Clip [Open O]
× 4
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 4
-
Wheel 18mm x 14mm with Axle Hole, Fake Bolts and Shallow Spokes
No longer produced · last seen 2023
× 4
-
Tyre 37 × 18 R Balloon
× 4
-
Plate Special 1 × 2 with Handle on End [Closed Ends]
× 4
-
Technic Beam 1 × 2 Thick with Pin Hole and Axle Hole
× 4
-
Brick Sloped 30° 1 × 2 × 2/3
× 4
-
Technic Axle 4 with Stop
× 4
-
Plate Round 2 × 2 with Rounded Bottom [Boat Stud]
× 3
-
Plate Special 1 × 2 Rounded with 2 Open Studs
× 3
-
Plate Special 1 × 2 [Side Handle Closed Ends]
× 3
-
Brick Sloped 30° 1 × 2 × 2/3
× 3
-
Tile Special 1 × 2 Grille with Bottom Groove
× 2
-
Plate 2 × 2 Corner
× 2
-
Wedge Plate 3 × 3 Cut Corner
× 2
-
Plate 2 × 4
× 2
-
Plate 2 × 3
× 2
-
Plate 2 × 2
× 2
-
Bar Holder with Clip
× 2
-
Bracket 5 × 2 × 1 1/3 with Holes, Pin Bottom
No longer produced · last seen 2024
× 2
-
Tile Special 1 × 1 with Clip with Rounded Edges
× 2
-
Wedge Plate 2 × 2 Cut Corner
× 2
-
Bracket 1 × 2 - 1 × 4 [Rounded Corners at Bottom, Square Corners at Top]
× 2
-
Brick Sloped 45° 2 × 1 with Bottom Pin
× 2
-
Tile 1 × 1 with Groove
× 2
-
Plate 1 × 8
× 2
-
Plate 1 × 3
× 2
-
Technic Brick 1 × 4 [3 Pin Holes]
× 2
-
Brick Special 1 × 1 with Headlight
× 2
-
Brick Curved 1 × 2 × 1 1/3 with Curved Top
× 2
-
Tile 1 × 6 with Groove
× 2
-
Technic Plate 1 × 5 with Smooth Ends, 4 Studs and Centre Axle Hole
× 2
-
Equipment Candlestick
× 2
-
Plate Special 1 × 4 with 2 Studs with Groove [New Underside]
× 2
-
Bracket 1 × 2 - 2 × 2
× 2
-
Plate Special 1 × 2 [Side Handle Closed Ends]
× 2
-
Brick Curved 3 × 1 No Studs
× 2
-
Plate Special 1 × 2 with Clips Horizontal [Open O Clips]
× 2
-
Brick Sloped 18° 2 × 1 × 2/3 with 4 Slots / Grate
No longer produced · last seen 2024
× 2
-
Exhaust Pipe with Technic Pin - Flat End, Squared Hole
× 2
-
Bracket 1 × 1 - 1 × 2 Inverted
× 2
-
Plate Round 1 × 1 with Open Stud
× 2
-
Plate Special 1 × 2 with Bar Up [Horizontal Arm 5mm]
× 2
-
Arm Mechanical with Clip [Thick Support]
× 2
-
Bracket 1 × 2 - 1 × 2 Inverted
× 2
-
Bracket 1 × 2 - 1 × 2
× 2
-
Brick 2 × 4
× 1
-
Plate 2 × 3
× 1
-
Plate 2 × 8
× 1
-
Tile 1 × 2 with Groove
× 1
-
Plate 1 × 4
× 1
-
Plate 1 × 4
× 1
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (8)
These extra parts come with the set in case one gets lost.
-
Tile 1 × 1 with Groove
× 1
-
Technic Bush
× 1
-
Technic Pin 1/2 without Friction Ridges
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Plate Special Round 1 × 1 with Hollow Stud and Horizontal Bar 1L
× 1
-
Pneumatic T-Piece (T Bar) [New Style]
× 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 1
-
Plate Round 1 × 1 with Open Stud
× 1
Alternative models
A 3-in-1 set: the official LEGO® building instructions contain three models you can build from the same parts. View the official building instructions at LEGO® ↗
What can I build with it?Description
Three vehicles from one box
As a Creator 3-in-1 set, 31123 can be rebuilt into three different vehicle variants using the same 160 pieces, with no extra parts required for any version. That keeps the set relevant well past the first build, since each rebuild starts from scratch rather than tweaking the existing model. For anyone who enjoys vehicle builds, that repeatable format offers more variety than a single fixed model at a comparable part count. Building all three versions in turn also gives a good sense of how differently the same basic pieces can be combined.
A sporty black, white and green look
The colour scheme favours a high-contrast mix of black and white, lifted by a green accent and dark bluish grey for mechanical detail. That combination reads sportier than the earthy browns typical of many off-road vehicle sets, suiting a buggy built for speed rather than heavy-duty work. Of the 160 pieces, 70 are unique parts, a solid ratio for a vehicle set of this size. The green accent also helps the buggy stand out on a shelf next to more muted vehicle models.
Detail in a compact frame
Without a minifigure to accommodate, the set puts its full piece count into the vehicle itself, with room for details such as bumpers, a roll cage and an open chassis typical of off-road buggies. That focus produces a more detailed model than a comparable set split between a vehicle and a figure. The full parts list with every colour and quantity sits further down this page. That single-model focus is what sets this apart from sets where part of the budget goes towards a figure and accessories.
A quick build that pairs well with others
At 160 pieces, 31123 builds quickly while still offering enough part variety to stay engaging throughout. Without minifigures, it suits builders after a display or shelf model rather than a play scene, and it combines naturally with other Creator 3-in-1 vehicles already in a collection. For a shelf holding several vehicle models, its compact size makes it an easy addition alongside larger builds. It also fits neatly as a short project alongside a bigger set already underway.
FAQ
- How many models can be built from this set?
- 31123 is a Creator 3-in-1 set, so its 160 pieces can be rebuilt into three different vehicle variants.
- Does the set include minifigures?
- No, the set has no minifigures and focuses entirely on the vehicle model.
- What colours make up the buggy?
- Black and white provide contrast, with a green accent and dark bluish grey for mechanical detail.



