
Super Robot
Super Robot (31124) is a LEGO® Creator 3-in-1 set built from 159 pieces. The main model is a standing robot with poseable arms and legs, built mainly in black, yellow, light grey and red. The same parts can also be rebuilt into two further models.
- Set number
- 31124
- Year
- 2022
- Pieces
- 159
- Minifigures
- 0
- Theme
- Creator 3-in-1
- Different parts
- 52
Parts list 52
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
× 8
-
Brick Sloped 30° 1 × 2 × 2/3
× 8
-
Bracket 1 × 2 - 1 × 2 Inverted
× 8
-
Plate 2 × 4
× 6
-
Plate 2 × 3
× 6
-
Brick Curved 2 × 1 No Studs [1/2 Bow]
× 6
-
Brick Sloped 18° 2 × 1 × 2/3 with 4 Slots / Grate
× 6
-
Plate Special 1 × 2 with 5.9mm Centre Side Towball
× 5
-
Plate Special 1 × 2 5.9mm Centre Side Towball Socket
× 5
-
Tile 1 × 4 with Groove
× 4
-
Wedge Plate 3 × 3 Cut Corner
× 4
-
Plate 2 × 2
× 4
-
Plate 2 × 2
× 4
-
Plate 1 × 2
× 4
-
Plate Round 1 × 1 with Solid Stud
× 4
-
Plate Special 1 × 2 5.9mm Towball Socket
× 4
-
Plate Special 1 × 2 with End Towball
× 4
-
Tile Round 1 × 1 Quarter
× 4
-
Plate Special 1 × 1 with Clip Horizontal [Thick Open O Clip]
× 4
-
Brick Sloped 30° 1 × 2 × 2/3
× 4
-
Plate 2 × 6
× 3
-
Brick Curved 2 × 2 × 2/3
× 3
-
Brick 2 × 2 Corner
× 2
-
Plate Special 1 × 2 Side Handle [Free Ends]
× 2
-
Brick 1 × 1
× 2
-
Plate 1 × 4
× 2
-
Tile 1 × 6 with Groove
× 2
-
Brick Curved 2 × 2 × 2/3
× 2
-
Panel 1 × 2 × 1 with Rounded Corners and 2 Sides
× 2
-
Wedge Plate 2 × 2 Cut Corner
× 2
-
Brick Sloped 45° 2 × 1 with 2/3 Inverted Cutout and no stud
× 2
-
Brick Special 1 × 2 Palisade [aka Log]
× 2
-
Tile 1 × 2 with Groove
× 2
-
Plate Special 1 × 2 with Door Rail
× 2
-
Plate Special 1 × 2 Rounded with 2 Open Studs
× 2
-
Brick Sloped 65° 2 × 2 × 2 with Bottom Tube
× 2
-
Bracket 1 × 1 - 1 × 1
× 2
-
Plate Special 1 × 2 with Handles [Flat Ends / Low Attachment]
× 2
-
Bracket 1 × 2 - 2 × 2
× 2
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 2
-
Plate Special 1 × 2 with Handle on End [Closed Ends]
× 2
-
Brick Sloped Inverted 45° 2 × 2 [Round Hollow Bottom Pin, Bar-sized Stud Holes]
× 2
-
Brick Sloped 30° 1 × 2 × 2/3
× 2
-
Brick 2 × 3
× 1
-
Brick Curved 2 × 2 × 2/3
× 1
-
Plate Special 1 × 2 with Handles on Ends
No longer produced · last seen 2022
× 1
-
Wedge Plate 2 × 2 Left
× 1
-
Wedge Plate 2 × 2 Right
× 1
-
Brick Curved 2 × 2 × 2/3 Two Studs and Curved Slope End
× 1
-
Wedge Plate 8 × 3, 22° Right
No longer produced · last seen 2022
× 1
-
Wedge Plate 8 × 3, 22° Left
No longer produced · last seen 2022
× 1
-
Bracket 1 × 2 - 2 × 2 Inverted
× 1
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (3)
These extra parts come with the set in case one gets lost.
Alternative models
A 3-in-1 set: the official LEGO® building instructions contain three models you can build from the same parts. View the official building instructions at LEGO® ↗
What can I build with it?Description
A robot built from 159 pieces
The main build is a humanoid robot with broad shoulders, jointed arms and legs, a compact head and small sensor-like detail pieces. The black, yellow, light grey and red colour scheme gives the finished model an industrial, machine-like look that stands out clearly from the brighter, more playful sets in the wider range. At 159 pieces the build stays manageable and can be finished in a single sitting, yet the joints make the finished figure genuinely poseable rather than static. For a set of this size that is a solid result, and the robot displays well on a shelf, desk or in a small cabinet.
Three models in one box
Like every Creator 3-in-1 set, the box holds more than a single instruction booklet – it offers three separate starting points for the building table. The same 159 pieces used for the robot can also be rebuilt into two further models, so one set can be reused across several building sessions before you settle on a permanent display option. That makes the set noticeably better value than a one-off build and gives you a compact, well-defined parts pool to practise different building techniques with, without having to buy a much larger set.
52 different parts
Among the 159 pieces are 52 different elements, a fairly wide range of shapes, angles and functions for a set this size. That variety shows up in the jointed limbs, the contrasting colour panels and the small detail pieces on the head and hands that give the robot its technical character. Anyone planning their own modifications, or combining parts with other sets for a custom build, can check the parts list on this page first to see exactly which elements are available, in which colour and quantity.
Who the set suits
With no minifigures included, Super Robot is aimed squarely at anyone who wants a single, self-contained build rather than a play scene full of characters. That makes it a low-risk, easy way to try out the 3-in-1 format for the first time, and equally a solid, age-independent gift for anyone keen on robots or machines. Thanks to its compact size, the finished model fits on almost any shelf without taking up much space, and can be quickly rebuilt into either of the two alternate models whenever you fancy a change.
FAQ
- Does set 31124 include any minifigures?
- No, Super Robot is a standalone build with no minifigures – the robot model is the focus.
- Can you build more than one model from this set?
- Yes, as a Creator 3-in-1 set the same 159 pieces can be rebuilt into two further models.
- How many different parts does the set contain?
- The 159 pieces include 52 different elements, which is a varied mix for a set this size.



