
Flatbed Truck with Helicopter
Set 31146 is a LEGO® Creator 3-in-1 model from 2024 built from 270 pieces. The same parts rebuild into three different vehicles, one of them a flatbed truck carrying a helicopter. Below you'll find the complete parts list with every colour used.
- Set number
- 31146
- Year
- 2024
- Pieces
- 270
- Minifigures
- 0
- Theme
- Creator 3-in-1
- Different parts
- 119
Parts list 119
-
Plate Special 1 × 2 Rounded with 2 Open Studs
× 8
-
Plate 1 × 1
× 6
-
Wheel 14mm D. x 9.9mm with Centre Groove, Fake Bolts and 6 Spokes
× 6
-
Tyre 21 × 9.9
× 6
-
Plate 1 × 1
× 5
-
Plate Special 2 × 2 with Wheel Holders with Cross (+) Slots on Pins
× 5
-
Plate 1 × 2
× 4
-
Plate 1 × 2
× 4
-
Plate 1 × 2
× 4
-
Plate 1 × 1
× 4
-
Plate 3 × 3
× 4
-
Brick Curved 2 × 1 No Studs [1/2 Bow]
× 4
-
Brick Special 1 × 2 × 1 2/3 with 4 Studs on 1 Side
× 4
-
Tile Special 1 × 2 Grille with Bottom Groove
× 4
-
Tile 1 × 2 with Groove
× 4
-
Plate Special Round 1 × 1 with Hollow Stud and Horizontal Bar 1L
× 4
-
Tyre 14 × 6 Solid Smooth
× 4
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 4
-
Plate Special 1 × 1 with Clip Vertical [Thick Open O Clip]
× 4
-
Wheel 11 × 6 with 8 Spokes
No longer produced · last seen 2024
× 4
-
Arm Mechanical with Clip [Thick Support]
× 4
-
Bracket 1 × 2 - 1 × 2 Inverted
× 4
-
Plate 1 × 2
× 3
-
Brick Curved 2 × 1 No Studs [1/2 Bow]
× 3
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
× 3
-
Brick Curved Inverted 2 × 1
× 3
-
Bracket 1 × 2 - 1 × 4 [Rounded Corners at Bottom, Square Corners at Top]
× 3
-
Brick Sloped 45° 2 × 1 with Bottom Pin
× 3
-
Brick Sloped 45° 2 × 1 with Bottom Pin
× 3
-
Tile 1 × 1 with Groove
× 3
-
Plate 1 × 4
× 3
-
Plate 2 × 6
× 3
-
Plate 1 × 5
× 3
-
Brick Sloped 30° 1 × 2 × 2/3
× 3
-
Wedge Plate 3 × 6 Cut Corners
× 2
-
Plate 2 × 2 Corner
× 2
-
Plate 2 × 12
× 2
-
Plate 2 × 3
× 2
-
Plate 1 × 1
× 2
-
Brick 1 × 2 without Bottom Tube
× 2
-
Tile 1 × 2 with Groove
× 2
-
Tile 1 × 2 with Groove
× 2
-
Tile 1 × 1 with Groove
× 2
-
Plate 1 × 3
× 2
-
Plate 1 × 3
× 2
-
Plate 1 × 4
× 2
-
Tile 1 × 8 with Groove
× 2
-
Plate Round 1 × 1 with Solid Stud
× 2
-
Plate Round 1 × 1 with Solid Stud
× 2
-
Brick 2 × 2 without Inside Ridges
× 2
-
Technic Brick 1 × 1 with Pin Hole
× 2
-
Brick Curved 2 × 2 × 2/3
× 2
-
Bar Holder with Hole and Bar Handle
× 2
-
Tile Round 1 × 1 Quarter
× 2
-
Wedge Plate 2 × 2 Cut Corner
× 2
-
Brick Special 1 × 1 with Studs on 2 Adjacent Sides
× 2
-
Tile Special 2 × 2 Corner with Cut Corner - Facet
× 2
-
Tile Special 2 × 2 Corner with Cut Corner - Facet
× 2
-
Technic Brick 1 × 2 [2 Pin Holes]
× 2
-
Plate Special 1 × 2 with Door Rail
× 2
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (18)
These extra parts come with the set in case one gets lost.
-
Plate 1 × 1
× 1
-
Plate 1 × 1
× 1
-
Plate 1 × 1
× 1
-
Plate 1 × 1
× 1
-
Tile Round 1 × 1 Quarter
× 1
-
Tile 1 × 1 with Groove
× 1
-
Tile 1 × 1 with Groove
× 1
-
Tile 1 × 1 with Groove
× 1
-
Plate Special Round 1 × 1 with Hollow Stud and Horizontal Bar 1L
× 1
-
Pneumatic T-Piece (T Bar) [New Style]
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 1
-
Light Cover 1 × 1 Round with Internal Bar / Bionicle Barraki Eye
× 1
-
Bar, Angled with 1 × 1 Round Plate / Stud on End
× 1
-
Technic Pin 1/2 with Friction
× 1
Alternative models
A 3-in-1 set: the official LEGO® building instructions contain three models you can build from the same parts. View the official building instructions at LEGO® ↗
Fan models by Rebrickable users that you can build (mostly) from this set’s parts. Instructions are available from the designers.
- 31146 Alternate MOC Pack
- 31146 Tow Truck
- 31146 Truck & Trailer & RaceBoat
- 31146 Cherry Picker
- 31146 Fire Truck
- 31146 Ambulance Truck & Oldtimer & Plane
- 31146 Truck and HotRod
- 31146 Car & Air Speeder
- 31146 Muscle Car
- Transform the 31146 small truck into Optimus Prime!
- 31146 Hot Rod Club (6561 homage)
- 31146 Speed Racer
All 150 ideas at Rebrickable ↗
What can I build with it?Description
Three builds, one box
LEGO® Creator 3-in-1 sets are designed so the same collection of bricks can become three separate models, following three separate instruction booklets. Set 31146 follows that formula: build the flatbed truck with its helicopter first, then take it apart and rebuild it into an alternative vehicle, and later a third design. That structure means the building experience doesn't end when the first model is finished. Instead of shelving the set after one build, you get three distinct projects from a single box, which makes it noticeably better value for repeat building sessions.
270 pieces, 119 part types
At 270 pieces, this is a mid-sized set within the Creator 3-in-1 range, large enough to include moving elements such as a rotor or a tilting truck bed while still being manageable in a single sitting. The build uses 119 unique part types, a fairly high variety for its piece count, which keeps construction varied rather than repetitive. No minifigures are included with this set, so the entire piece budget goes into the vehicle model itself. The full parts list below shows exactly which elements and quantities are used.
Colour palette
The build leans on light bluish grey, black, red and white, a classic combination for utility vehicles that gives the model a realistic, workmanlike look. Light bluish grey forms the chassis and flatbed, black covers tyres and mechanical details, while red and white pick out the cab and warning markings so the truck reads clearly even at a distance. Builders who plan to reuse parts afterwards get a solid stock of vehicle-appropriate colours and shapes from this set, useful for extending other vehicle builds.
Who it suits
This set fits builders who like getting several models out of one purchase rather than buying separate sets. The rebuild mechanic keeps the set relevant well past the first build session, and once you're done experimenting, the pieces work just as well in your own vehicle creations. Checking the parts list on this page before you buy also helps if you're hunting for specific elements or colours to combine with other sets in your collection.
FAQ
- How many pieces does set 31146 have?
- It has 270 pieces across 119 unique part types, shared between the three buildable models.
- Does this set include any minifigures?
- No, this Creator 3-in-1 set focuses entirely on the vehicle model and doesn't include minifigures.
- Can I keep all three models built at once?
- No, the same pieces are rebuilt for each of the three designs, so only one model can be on display at a time, though instructions for all three are included.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



