
LEGO® Wild Animals: Pink Flamingo
The Pink Flamingo from LEGO®'s Creator 3-in-1 range captures the bird's long single leg and curved neck in 288 pieces of Bright Pink, Coral, White and Light Aqua. It's one of the smaller builds in the 3-in-1 line, yet the instructions turn the same bricks into two further animal models. Anyone wanting to mix the pieces differently can check the full parts list on this page first.
- Set number
- 31170
- Year
- 2025
- Pieces
- 288
- Minifigures
- 0
- Theme
- Creator 3-in-1
- Different parts
- 96
Parts list 96
-
Tile Round 1 × 1 Quarter
× 24
-
Plate 1 × 2
× 11
-
Technic Axle 2 Notched
× 9
-
Technic Axle Connector Smooth [with x Hole + Orientation]
× 8
-
Plate 1 × 2
× 7
-
Plant, Fern 2 × 3 × 2
× 6
-
Plate 1 × 4
× 6
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
× 6
-
Plate Round Corners 2 × 6 Double
× 6
-
Tile Round 1 × 1 Quarter
× 6
-
Brick Round 2 × 2 D. Tube with 45° Elbow and Axle Holes (Crossholes) at Each End [LONG]
× 5
-
Wedge Plate 2 × 2 Left
× 5
-
Wedge Plate 2 × 2 Right
× 5
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small
× 5
-
Bar, Angled with 1 × 1 Round Plate / Stud on End
× 5
-
Brick Curved 4 × 2 No Studs
× 5
-
Plate 1 × 3
× 4
-
Plate 1 × 6
× 4
-
Bar Holder with Clip
× 4
-
Brick Curved 2 × 1 No Studs [1/2 Bow]
× 4
-
Brick Curved Inverted 2 × 1
× 4
-
Plate Special 2 × 3 with Rocks
× 4
-
Brick Curved Inverted 2 × 2 × 2/3
× 4
-
Brick Curved 3 × 1 No Studs
× 4
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 4
-
Plate Special 1 × 2 with Handle on End [Closed Ends]
× 4
-
Brick Round Corner, Curved 3 × 3 × 1 Quarter Circle
× 4
-
Plate Round 1 × 1 with Open Stud
× 4
-
Brick Special 1 × 1 with Stud on 1 Side
× 4
-
Brick 1 × 2
× 3
-
Plate 2 × 4
× 3
-
Plate 2 × 2
× 3
-
Plate 2 × 2
× 3
-
Plate 1 × 1
× 3
-
Plate Special 2 × 2 × 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version
× 3
-
Brick Special 1 × 2 with 2 Studs on 1 Side
× 3
-
Brick Wedged, Curved 2 × 1 with Stud Notch Right
× 3
-
Brick Wedged, Curved 2 × 1 with Stud Notch Left
× 3
-
Cone 1 × 1 [Top Groove]
× 3
-
Bracket 1 × 1 - 1 × 2 Inverted
× 3
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium
× 3
-
Hinge Plate 1 × 4 Swivel Top / Base - Hollow Clip [Complete Assembly]
× 2
-
Technic Axle Towball
× 2
-
Brick 2 × 2
× 2
-
Brick 1 × 1
× 2
-
Technic Brick 1 × 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin
× 2
-
Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip]
× 2
-
Plate 1 × 3
× 2
-
Brick Curved 1 × 2 × 1 with Curved Top
× 2
-
Plate Special 1 × 2 with Pin Hole on Top
× 2
-
Plate Special 1 × 2 5.9mm Centre Side Towball Socket
× 2
-
Brick Curved 2 × 2 × 2/3
× 2
-
Brick Curved 2 × 2 × 2/3
× 2
-
Tile Special 1 × 1 with Clip with Rounded Edges
× 2
-
Plate Round Half 3 × 6 with 1 × 2 Cutout
× 2
-
Technic Pin Connector Hub with 2 Axles
× 2
-
Technic Plate 2 × 6 [5 Holes]
× 2
-
Plant, Plate 1 × 1 Round with 3 Leaves
× 2
-
Technic Axle Pin with Friction Ridges Lengthwise
× 2
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 2
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (12)
These extra parts come with the set in case one gets lost.
-
Plate 1 × 1
× 1
-
Tile Round 1 × 1 Quarter
× 1
-
Tile Round 1 × 1 Quarter
× 1
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small
× 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 1
-
Technic Pin with Friction Ridges Lengthwise with No Center Slots
× 1
-
Bar, Angled with 1 × 1 Round Plate / Stud on End
× 1
-
Plate Round 1 × 1 with Open Stud
× 1
-
Plate Round 1 × 1 with Open Stud
× 1
-
Tile Round 1 × 1 with White Dot/Circle/Eye print
× 1
Alternative models
A 3-in-1 set: the official LEGO® building instructions contain three models you can build from the same parts. View the official building instructions at LEGO® ↗
Fan models by Rebrickable users that you can build (mostly) from this set’s parts. Instructions are available from the designers.
- Millennium Flamingo! 31170 Alt Build
- Coral Dragon - 31170 ALT
- 31170 Seahorse
- 31170-Silly pink sheep in A Mc Movie(Alternate)
- 31170-Weedy Seadragon (Alternate)
- 31170 Pink Elephant
- Lovebirds - 31170 ALT
- 31170 crayfish
- 31170 spinosaurus aegyptiacus/mirabilis (Bennie) paleo accurate
- 31170 montanoceratops (Teressa) paleo accurate
- 31170 galeamopus (Kelcy) paleo acurate
- 31170 dakotaraptor (berge) paleo accurate
Description
Three builds in one box
Every Creator 3-in-1 set hides more than one build, and the Pink Flamingo is no exception: the instructions show two further animal models made from the same 288 pieces, with no extra bricks required. Only one version stands finished at a time, but the option to rebuild adds real replay value once the first model has been admired for a while. With 96 unique parts, there's enough variety to keep the rebuilding interesting rather than repetitive. Anyone who wants to plan a rebuild in advance can check exactly which pieces are available using the parts list on this page.
Colours and build experience
Bright Pink, Coral, White and Light Aqua give the flamingo a bold, summery look that stands out from most other Creator sets on a shelf. At 288 pieces it sits among the smaller to mid-sized 3-in-1 builds, making it a realistic single-sitting project or a good pick for shorter building sessions. The design leans on curved and angled elements to recreate the bird's S-shaped neck and single-leg stance, which makes it a useful step up for builders moving past straightforward brick-stacking.
Display piece, not a play set
There are no minifigures included, and the finished flamingo works purely as a display model rather than a play set, which suits a shelf, desk or windowsill. That focus on display makes it a good match for collectors and for anyone who enjoys building animal shapes. The 96 unique parts also mix well with other Creator or animal-themed sets for custom builds beyond the official instructions. Checking the parts list on this page first makes it easy to see exactly which colours and shapes come in the box.
Who this set suits
The Pink Flamingo suits builders who prefer a compact project with a clear result over a sprawling themed set, which makes it a reasonable gift, a starting point for younger builders, or a quick evening project for adults. Because it depicts an animal rather than a vehicle or building, it pairs naturally with other Creator animal sets already on a shelf. Since the instructions include more than one buildable model, there's also room to rebuild it later in a different form, rather than assembling it once and leaving it unchanged indefinitely.
FAQ
- How many pieces does the Pink Flamingo 31170 have?
- The set has 288 pieces across 96 unique parts, mostly in Bright Pink, Coral, White and Light Aqua.
- Does the set include any minifigures?
- No, 31170 has no minifigures; the finished animal model is the sole focus of the set.
- Can this set be built into something other than a flamingo?
- Yes, as a Creator 3-in-1 set it includes instructions for two alternative animal builds using the same 288 pieces.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



