
Parts list 82
-
Plate Round 1 × 1 with Solid Stud × 7
-
Plate 1 × 2 × 6
-
Plate 1 × 3 × 6
-
Plate 2 × 3 × 5
-
Plate 1 × 2 × 5
-
Technic Brick 1 × 2 [1 Pin Hole] × 5![Technic Brick 1 × 2 [1 Pin Hole] Black](/media/parts/3700/0/technic-brick-1-x-2-1-pin-hole-black.jpg)
-
Tile 1 × 4 with Groove × 4
-
Plate 1 × 2 × 4
-
Tile 1 × 2 with Groove × 4
-
Tile 1 × 1 with Groove × 4
-
Plate 1 × 3 × 4
-
Brick Curved 2 × 1 No Studs [1/2 Bow] × 4![Brick Curved 2 × 1 No Studs [1/2 Bow] Magenta](/media/parts/11477/26/brick-curved-2-x-1-no-studs-12-bow-magenta.jpg)
-
Hinge Plate 1 × 4 Swivel Top / Base - Solid Clip [Complete Assembly] No longer produced · last seen 2022 × 4![Hinge Plate 1 × 4 Swivel Top / Base - Solid Clip [Complete Assembly] White](/media/parts/73983/15/hinge-plate-1-x-4-swivel-top-base-solid-clip-complete-assembly-white.jpg)
-
Brick 1 × 2 × 3
-
Brick 1 × 4 × 3
-
Plate 1 × 3 × 3
-
Dish 2 × 2 Inverted [Radar] × 3![Dish 2 × 2 Inverted [Radar] Black](/media/parts/4740/0/dish-2-x-2-inverted-radar-black.jpg)
-
Plate Round 1 × 1 with Solid Stud × 3
-
Tile, Star with Stud Holder, Pin Hole × 3
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) × 3
-
Plant, Flower, Plate Round 1 × 1 with 4 Petals No longer produced · last seen 2017 × 3
-
Plate Special 1 × 4 with 2 Studs, 3 Bottom Tubes No longer produced · last seen 2020 × 3
-
Brick Special 1 × 4 with Groove × 2
-
Plate 1 × 2 × 2
-
Plate 1 × 2 × 2
-
Brick Round 2 × 2 with Axle Hole × 2
-
Dish 2 × 2 Inverted [Radar] × 2![Dish 2 × 2 Inverted [Radar] Light Bluish Gray](/media/parts/4740/71/dish-2-x-2-inverted-radar-light-bluish-gray.jpg)
-
Plate Round 1 × 1 with Solid Stud No longer produced · last seen 2023 × 2
-
Plate Round 1 × 1 with Solid Stud × 2
-
Plate Round 1 × 1 with Solid Stud × 2
-
Panel 1 × 1 × 1 Corner No longer produced · last seen 2024 × 2
-
Tile Round 2 × 2 with Bottom Stud Holder × 2
-
Brick Special 1 × 2 with Vertical Clip [Open O Clip] × 2![Brick Special 1 × 2 with Vertical Clip [Open O Clip] White](/media/parts/30237b/15/brick-special-1-x-2-with-vertical-clip-open-o-clip-white.jpg)
-
Tile 1 × 2 with Stylised Computer Console Print × 2
-
Plate Round 2 × 2 with Axle Hole Type 1 (+ Opening) × 2
-
Plate Special 1 × 2 [Side Handle Closed Ends] × 2![Plate Special 1 × 2 [Side Handle Closed Ends] Black](/media/parts/48336/0/plate-special-1-x-2-side-handle-closed-ends-black.jpg)
-
Panel 1 × 4 × 3 [Side Supports / Hollow Studs] × 2![Panel 1 × 4 × 3 [Side Supports / Hollow Studs] Trans-Clear](/media/parts/60581/47/panel-1-x-4-x-3-side-supports-hollow-studs-trans-clear.jpg)
-
Door Frame 1 × 4 × 6 Type 2 × 2
-
Plate Special 1 × 2 with Clip Horizontal on End × 2
-
Equipment Telescope / Torch / Spyglass, Support Round 1 × 1 × 1 2/3 × 2
-
Plate Special 1 × 2 with Bar Up [Horizontal Arm 5mm] × 2![Plate Special 1 × 2 with Bar Up [Horizontal Arm 5mm] Black](/media/parts/88072/0/plate-special-1-x-2-with-bar-up-horizontal-arm-5mm-black.jpg)
-
Equipment Goblet / Glass × 1
-
Tile Special 1 × 2 with Handle × 1
-
Brick 2 × 6 × 1
-
Brick 2 × 2 × 1
-
Plate 2 × 4 × 1
-
Plate 2 × 3 × 1
-
Plate 2 × 2 × 1
-
Plate 2 × 8 × 1
-
Plate 1 × 6 × 1
-
Plate 1 × 4 × 1
-
Plate 2 × 6 × 1
-
Equipment Signal Paddle × 1
-
Hinge Brick 1 × 2 Base × 1
-
Brick Special 1 × 2 × 2/3 with Studs on Sides × 1
-
Hinge Brick 2 × 2 Top Plate Thin × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Brick Curved 1 × 4 × 1 1/3 No Studs No longer produced · last seen 2018 × 1
-
Musical Instrument Guitar Electric with White Strings and Star and Gold Geometric Print No longer produced · last seen 2016 × 1
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (13)
These extra parts come with the set in case one gets lost.
-
Tile, Star with Stud Holder, Pin Hole × 1
-
Headwear Accessory Ear Protectors / Headphones No longer produced · last seen 2015 × 1
-
Lever Small Base with Black Lever × 1
-
Tile 1 × 1 with Groove × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Plate Round 1 × 1 with Solid Stud No longer produced · last seen 2023 × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Plant, Flower, Plate Round 1 × 1 with 4 Petals No longer produced · last seen 2017 × 1
-
Musical Instrument Microphone with Metallic Gold Top Half Screen Print × 1
Minifigures 1
Description
A studio in miniature
Instead of a stage, you build the place behind the scenes where an idea turns into a song. With 173 pieces the studio stays manageable and can be finished in an afternoon. There is a recording area, room for equipment and small accessories that bring it to life. Because the walls are kept open, you can reach in at any time and move the figure to the mixing desk, the microphone or the sofa. Children who like acting out everyday scenes will find plenty of small cues for stories.
Dark tones with splashes of colour
Black and white give the equipment its professional look, while dark purple and medium azure bring in the typical Friends colour scheme. It is a mix that rarely appears in standard sets and so suits scenes meant to feel modern and a little glamorous. For your collection the purple and azure parts are especially useful when you want to design furniture, shops or cafés in stronger shades than the usual pastels.
One figure, many stories
With a single minifigure the lead character stands at the centre and everything else revolves around her: equipment, room and mood. That invites role play, from the first rehearsal song to the finished recording. If you own other Friends sets, you can place the studio beside a house or a café and create a small town with a music scene. As a display piece the model is easy to accommodate thanks to its modest size.
Parts list and rebuild ideas
The parts list on this page shows all 68 distinct part types with colour and quantity and helps you check a second-hand set. With the “What can I build?” tool you can see which other models might come from these bricks and your own stock, such as a bar, a photo studio or a small stage. The technical pieces and accessories in particular have plenty of uses, even if you take the studio apart again later.
FAQ
- How many pieces does the Pop Star Recording Studio have?
- It has 173 pieces, 68 of them different part types, and includes 1 minifigure. It was released in 2015 in the Friends range.
- Which colours does it use?
- Mostly black, white, dark purple and medium azure. The parts list shows the exact split.
- Does it go with other Friends sets?
- Yes. It stands well beside houses, cafés or shops from the range, and the parts share the same colour world.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



